How to hang a door
Vložit
- čas přidán 23. 04. 2024
- How to hang a door
#carpentry #woodworking #joinery
Dont forget to subscribe !
Find me in all the usual places
Instagram: / ltwcarpentry
Facebook: / ltwcarpentrysolution
Website: lewiswiseman.wixsite.com/ltwc...
Main camera: Canon 250D amzn.to/2Xb3oQ3
Second camera: Canon M3 amzn.to/3hpX1zv
Main microphone: Rode vidomic go amzn.to/3lloovw
Second mic: Boya BY-MM1 amzn.to/2YGh4mE
Editing laptop: Apple macbook pro amzn.to/390CWuT
Audio recoder: Zoom h1n amzn.to/3lhhiby - Jak na to + styl
Roast dinner. Love the video and tips, nice to see one that explains as they go along instead of a rushed video with not much information. I’m about to hang my first door and have 6 to do 😬 wish me luck 😅
Hate roast dinners almost as much as I dislike hanging doors. Do it exactly the same way. Very clear instruction as always.
roast dinner -superb carpentry, Ive been doing this business for 27 years and I learn something nerw from u every video.thank you.
Roast dinner excellent explanation on door hanging especially with a out of square frame. Thank you we appreciate your help.
That carpet in the hallway brought back memories when me and wifey bought our house it was everywhere 😂 great video mate it's Sunday so roast dinner time 👌
Roast dinner…… nice fit !! Great explanation. I personally like to fit a pair and a half hinges to oak, especially when the old frame still has the cut out, but each to their own.
Cheers Paul, yes I agree mate, everyone has different ways. Thanks for the comment and the support buddy
Roast dinner! Tidy work as usual mate 👌🏻
Roast Dinner… 🚪 top job! 👍🏾
Roast dinner Great video that’s exactly how I do them . A lot of doors I fit in Yorkshire have door casings so can sometimes be a bit more difficult as the rebate can sometimes be way out so I nail a piece of doorstop on for a good fit . I’m getting on a bit so takes me a bit longer these days lol
Roast dinner. Neat work. 👏🏼
Roast dinner. Great video Lewis you make everything look so easy
lol, cheers Jim. I have practiced atleast a thousand times mate 🍻
Nifty freehand router skills. Roast dinner sounds good. I've got a pork shoulder in the oven as we speak. I use a shop made jig - takes a bit longer to set up, but is much cheaper than those posh XL doors.
Roast dinner, nice little video, good detail. Was wondering if you could do a video fitting a bathroom sash lock sometime
Roast dinner. Excellent tutorial mate. Got to be honest I always hated hanging fully finished doors, never saw the point in them myself as you still have to finish the cu5 edges but also match the finish, but maybe I’m just tight 😂!!
Roast dinner. Nicely done mate!
Roast dinner, really good explanation. Could have done with this a few months ago 😂😂
It was partly down to you saying you couldn’t find a door hanging video on my channel that made realise I needed to do one 😂😂
another great video Roast Dinner
Roast dinner another great no nonsense tutorial mate 👍
Let's have a good roast diner another good video fitting the door keep up the good work and how's the van and have you fitted it out simon
Roast dinner. Nice to see that you had a similar issue as i normally have putting new doors into out of square frames. I have yet to come across a head thats level! Unless its one ive done lol. Mostly i find the head is 10 to 15mm out of level! Thats typical to what i find in older houses. And of course if its a fire door going in the hole then theres another issue! It would be nice to see how you get round that problem and your technique for scribing the stiles to the legs of the frame. I tend to (just my way of trying to do it which they dont teach in college) is from the other side of the door, put a door hook over the top and clip it to the top of the arc on the other side leaving the door proud of the stops but just touching the frame so you can get a 3mm packer and your pencil in and scribe a line up and down the (inside) of the stiles and across the head this will give you a line to plane/cut. Dont cut right upto the line just shy of it then you can tinker with it as you wish. Always sounds simple hanging a door but it can be a right pain especially the doors like your putting in as the vertical lines can exaggerate the out of plumb lines. If it looks right it is right which is not necessarily plumb and square! Every door is a learning curve! I spoke to another joiner and he said he just takes the arcs off and adjusts the lining to fit the door....rather than door to lining. No right and wrong way just your own way that works. Great video keep it up. Thank you.
Roast dinner. Good video mate 👍
Also saw marks still in the latch side? Also another tip use 3 inch latches puts the handle central of the style looks way better 😊
Excellent tutorial Lewis, roast dinner👊
Cheers hoggy 🐗🍻
Another great video, Roast Dinner,
Cheers Chris, much appreciated 🍻
Roast dinner, love em, video good as well
Roast dinner great vid keep them coming
Roast dinner! Hi mate great video as per, finishing my level 3 in a few weeks and hanging my double doors tomorrow, any last minute tips on the latch? All the best chief
Roast dinner . Quality work 👍
I'll have a roast dinner if your offering one !! lol
Anything for you Ian 🍻
Roast dinner. Great video!!
Cheers Kane 🍻
Roast dinner. Nice router work
Cheers buddy, can’t beat free hand routing can you 🍻
I know you like my roast dinners 😂 xxxx
Roast dinner. What do you use to hold the door on edge? Trend door clamp?
Round side out when hanging a door, wooden wedges instead of that wind bag.
Nice job Roast Dinner 😊
Cheers Jim ! Much appreciated 🍻
Can an oscillating multitool be used instead of a router to cut out the area for the hinge?
Roast dinner what size drill bit for drilling the latching into the size of the door please ?
Cheers Simon, I used a 25mm bit mate
Roast dinner 😂 great video fella, which model festool extractor you using?
Cheers buddy ! Much appreciated ! It’s the festool ct15e mate, the cheapest one they do
nice job as usual did you fit out your van yet roast dinner
roast dinner - good job.
Cheers Bobby 🍻
Hi can you tell me what sort of Brad gun your using please I've got a Makita 18G keeps miss firing mind you the reviews did say that but but I thought I could live with that but I was wrong so it's back to my trusty compressor😂😂
Roast dinner 😂
Irish roast dinner😂😂
Never had one mate 😂😂
How much of a gap do you leave at the bottom when fitted a new door lining when there is no flooring layed yet. Just the sub floor
If being carpeted I normally leave 18/20mm this may change depending on the quality of carpet going down. If it’s a laminate or tiled floor ect I will allow the thickness of flooring plus any underlay ect plus 5mm
Roast dinner. Lovely video thanks. I noticed that there were 3 hinges at some point on that door liner. You weren't tempted to fit a third hinge to hide the empty cut out? Or perhaps spoil us by showing how you make a fillet to fill the unused slot?
Not the point of the video I know. You showed us some lovely techniques for fitting into a wonky hole. But I have a keyboard and I know how to weild it!
As a fellow chippy love your channel could you also talk about prices? Roadspinner
Cheers Jim ! It’s always nice to know other Chippie’s watch the channel mate. Yes I plan to do so actually, I have had a few requests for it 🍻
Great video and very informative and great job, question is there no need to put a leading edge on the sides or is it not used nowadays Cheers for the Roast Dinner
Not with ball bearing hinges mate
Roast dinner. Thanks for the video Lewis, would have been nice to see you actually scribe the door.
Roast dinner 👍🏻👍🏻
Nice one Stuart 🍻
Roast dinner 👏🏾👏🏾
Roast dinner really good video
Cheers Stuart ! Much appreciated mate ! 🍻
Why’s the reason for not adding the 3rd hinge
What’s your advice if the architrave is too close to the frame and your butt of your hinges catches it? Roast dinner
You can notch the arcs around the hinge buddy, just do a little relief, or replace the arcs altogether 🍻
Great tutorial mate clearly explained-Roast Dinner PS. My windbag lets out a lot of air, thankfully she wasnt at work today
lol, that’s one of your better ones Fred ! Thanks for watching mate 🍻
great video - roast dinner
Roast dinner!
Nice job, roast dinner
Thank you Charlotte 🍻
Roast Dinner. 👍
Cheers Roy 🍻
Roast beef or lamb please :)
Lamb roast ! Now we are talking ! 🍻
@@LTWCarpentry if only I could afford it 😄😄
Roast dinner 😊
Cheers buddy 🍻
Roast Dinner
Where are you based because I need 2 doors to be fitted?
In Essex mate
nice vid roast dinner
Cheers buddy ! Much appreciated 🍻
Roast dinner 😅
Cheers Kevin 🍻
roast dinner
roast dinner especially roast beef
Roast lamb is my favorite but you can’t beat a bit of cow can you Anthony 🍻
🥩
Roast dinner.
Cheers Darren 🍻
Nice job roast dinner
Roast dinner
Cheers Alan 🍻
Roast dinner,
Roast Dinner 🥘
Roast dinner.
Cheers Danny 🍻
Roast dinner
Cheer bill 🍻
Roast dinner.
Cheers Pat 🍻
Roast dinner
Roast dinner
Cheers Mike 🍻
Roast dinner
Cheers Dan 🍻