Jeep Fiber Optic Interior LED Custom Lighting Dash Kit- Gladiator and Wrangler JL by ORACLE Lighting
Vložit
- čas přidán 6. 07. 2024
- ORACLE Lighting’s new Fiber Optic Interior Kits are the perfect way to accent your vehicle’s dull interior in a clean and seamless way. The special side-firing fiber optic cables have an integrated edge to make installation easy on any vehicle. Using the included installation tool, insert the integrated edge between interior body panels in your vehicle including door panels, dashboard, headliner, console, and more. The power cord adapter has a switch to turn ON and OFF the lights conveniently.
This is a universal product. While this is simple in most cases, it is important to understand each vehicle is different and may need some installation experience to pull off the perfect install, so we recommend professional installation. For the Jeep Gladiator and Wrangler JL we recommend our 4 piece LED light kit to give your dash the brightest output!
Part # 4236-333
Wanna learn more? Check it out here: www.oraclelights.com/products... - Auta a dopravní prostředky
😂 this guy almost took the whole Jeep apart just to install lights
two thumbs up (one for the manual) 👍👍
My stop working how can I reset them? I only have 7 months with them
I am confused about a couple of things. The remote does not seem to work (removed the clear plastic battery strip). Is this an IR remote or a wireless? No buttons seem to work. Also, is there information on the LED Lamp app? The app is not controlling anything like brightness or color.
It looks really cool :)
The part where you jam the light strip into the corners of the dashboard, won't it leave a bigger gap between the leather part and the plastic part of the dashboard?
No, the fin is extremely thin.
This product looks cool in the dark/nighttime photos, but it would be nice if you could add some pics on the website of how the dash looks with the fiber optic cable in the daylight as well. Not just for how well the color shows, but how much of the fiber optic cable itself shows in the daylight. Kinda hard to tell from just the close up shots in the installation video.
Thank you for the feedback, will pass that recommendation along to the team!
@@ORACLElights still waiting…..
@@retroworld5339 we can't post photos but if you go to the product page (link in the description) you can see what it looks like when its off (daytime).
@@retroworld5339 It will never look factory. Looks good at night but during the day it will be noticeable as adds on. Not sure if I like that.
Couldn't you use one of the Wrangler's optional "Aux" switches to power these?
Yes, if you have that option.
Do you have to turn them on every time you turn the Jeep on or does it remember the last setting you had? Thanks!
It goes back to the last setting you had when you turn on the Jeep.
Can i put another t-tap behind the cigarette if i already have it t-tapped for other led lights?
Yes, you can add a secondary t-tap or put both leads to the original t-tap.
Will this interfere with my fm/am antenna connection due to the metal connectors
No. Does not cause any interference.
When buying it has options of 2 piece, 4 piece, etc etc…. What was used in this video?
Hello, please use the link in the description to purchase the correct item.
I could be wrong but it looks like it's a 2 piece.
@@joegarcia3310 it is 2 pieces correct.
Will this void warranty if I connect to the pen wires?
No, this will not void your warranty.
Are there certain types of t taps I have to buy?
Standard blue scotch-locks will work fine for this.
I did the exact same thing and I’m not getting any response from the Oracle lights or the handheld controller. Nothing from the App either it’s not even detecting the device. The cigarette lighter works cause I tested my radar detector. Third oracle led device I’ve purchased in a row that doesn’t work.
Hello, thanks for replying. You can call us directly at (800)407-5776 for free Tech Support. A few things to check, 1) the Cig Lighter does not work on the Bronco unless the Truck is running so if you are using the adapter be sure the Bronco is on. 2) The remote battery has a cover on it, will not work until you remove the plastic cover, 3) The app needs all pop up permissions granted for connectivity. If you do not have connectivity delete and reinstall the app making sure to grant permissions.
Thanks for the response. It’s a Jeep Gladiator and I took the plastic cover off the battery on the remote. And the app doesn’t do anything. It just says no equipment pull down to refresh device. I’ll try to delete and reinstall the app but the remote doesn’t work either. Brand new kit just opened it.
@@chriskociolek1830 Gladiator is the same way, the truck needs to be on (unless to change fuse position) for the Cig Adapter to have power. Again we are here to help 800-407-5776.
Can the app be used for these lights?
Yes, this comes with a free app.
Can you control the lights? Via app?
The kit comes with both Bluetooth (App) control and a physical remote control.
Will this fit Jk models?
Yes, its a universal product. We are just demonstrating installation on a JL here.
Are those 22-18 Gauge T-taps?
Yes, the red ones are 22-18 Gauge