Will, I am always impressed with your "Dive In and Do-It" attitude. I had a hard time just installing mud flaps on my TRX. I really like the looks and fitment of your new steering wheel, I will definitely be buying one. Since you mention that you did break some parts, any suggestions so we don't do the same? Good job, I enjoyed it.
Thanks!! I appreciate the love! For the air bag portion I recommend using a tool with a notch in it. That way the spring can’t slide off and you can fully push it out the way. Maybe a 2nd set of hands pulling on the bag might also help while you slide the spring.
Nice! That wheel looks premium! I have the level 2 wheel, but the alcantera bothers me a bit. I am worried it will start to look worn/bad in a short amount of time! It that happens, I’ll be looking for the wheel you just installed! Thanks for the vid!
Thanks! I feel the same about the alcantara, I think it looks great but if my hands were dirty I could see it taking a toll. I was really torn on doing alcantara instead of the leather
Do as you see fit I don’t want your liability. But I’ve had zero issues going on 7 months with this wheel & over 3 years with my prior truck with the same install.
Hello, I am sorry for disturbing you. Many people are looking for LED Side Mirror Sequential Dynamic Turn Signal Light for TRX, are you interested in doing a review for it? We will send the product to you. Thank you so much.
@@Wimya i took an old allen wrench and used my grinder to make a notch in the end. The notch will catch on the wire and allow you to push back and not slide off. I took me less than 5 minutes to get mine off.
Steering wheel looks great, and you do a fantastic job explaining how to do this stuff.
Thanks!! I really appreciate that!! 🙌🏼🙌🏼
Glad to see you didn't give up on getting it installed man lol 🤙
Hahah there were many of times I wanted to! 😂😂
TRX Papi, back with another banger.
Ayyyy thanks broski!! 🙌🏼🥹
Will, I am always impressed with your "Dive In and Do-It" attitude. I had a hard time just installing mud flaps on my TRX. I really like the looks and fitment of your new steering wheel, I will definitely be buying one. Since you mention that you did break some parts, any suggestions so we don't do the same? Good job, I enjoyed it.
Thanks!! I appreciate the love! For the air bag portion I recommend using a tool with a notch in it. That way the spring can’t slide off and you can fully push it out the way. Maybe a 2nd set of hands pulling on the bag might also help while you slide the spring.
Nice! That wheel looks premium! I have the level 2 wheel, but the alcantera bothers me a bit. I am worried it will start to look worn/bad in a short amount of time! It that happens, I’ll be looking for the wheel you just installed! Thanks for the vid!
Thanks! I feel the same about the alcantara, I think it looks great but if my hands were dirty I could see it taking a toll. I was really torn on doing alcantara instead of the leather
Wheel looks great, bummer about the trim but you rebounded nicely!
Thanks bro!! And once again I really appreciated the help!! 🤘🏼💪🏼🙌🏼
Oh I want that
It’s an awesome wheel!!
Looks great
Thanks!
Great wheel although a lot of damage to the front trim and the airbag holes, take it easy.
@@radiologyeg Shit happens when you’re the first one to figure out how it’s done.
Is that wheel still available?
🔥🔥
🤘🏼🤘🏼🤘🏼
🔥🔥🔥
🙌🏼🙌🏼🙌🏼
Doing one now, online says 45 ft/lbs. are you sure it’s 65? Also, online manual says use new factory nut. Think it’s fine to reuse the original?
Do as you see fit I don’t want your liability. But I’ve had zero issues going on 7 months with this wheel & over 3 years with my prior truck with the same install.
@@Wimya thanks so much!!
@@BackroadBlue no problem brotha! 💪🏼🙌🏼
BTW I didn't see the link to the ZEN website.
Sorry, should be visible now! 🤘🏼
@@Wimya Thank you
Hi ,would you like try our headlight bulb?
Message me on Instagram if you can @_wimya
🥰
Hello,
I am sorry for disturbing you.
Many people are looking for LED Side Mirror Sequential Dynamic Turn Signal Light for TRX, are you interested in doing a review for it?
We will send the product to you. Thank you so much.
Can you post a link so I can check them out? 🙌🏼🙌🏼
@@Wimya czcams.com/video/MUPrcleP23c/video.html
Will, how much is your total cost on all the CARBON FIBER you plan to install?
Roughly $2500ish. That’s exterior & interior pieces.
CAN I GET THAT STOCK ONE FROM YOU….?? SEND ME A MESSAGE. THANKS
Yea message me on Instagram @ _wimya
For the life of me I cannot get my airbag out 😭
It’s an absolute nightmare to get off!!!
@@Wimya i took an old allen wrench and used my grinder to make a notch in the end. The notch will catch on the wire and allow you to push back and not slide off. I took me less than 5 minutes to get mine off.
@@joicyiii smart move!