@@ShaneWelcher is there a proper way to tbshoot/ or explain the axis status bits faults ? Or maybe a different video..An example let’s say you want to home , and MAH doesn’t PC because .axis fault bit is set -without having an actual fault on the servo drive itself. It can be a mechanical problem, or something else or other time other bits are set, and no idea what caused them to go high.
I created a project a few months before with two axis. After watching this video i understand that i followed the right way. I also produced 1 degree cams with MAOC command. Machine speed is around 350RPM. And it worked with perfect performance. Perfect video. Thank you boss. 😇
Subscribe: czcams.com/channels/3B7gA1HAcbuPZOkBklFwuA.html
Other socials:
Facebook: facebook.com/OnlinePLCSupport
LinkedIn: www.linkedin.com/in/shane-welcher-sr/
14:18 MAM Instruction has the graphic trapezoidal explanation
Let me know if I can help
@@ShaneWelcher is there a proper way to tbshoot/ or explain the axis status bits faults ? Or maybe a different video..An example let’s say you want to home , and MAH doesn’t PC because .axis fault bit is set -without having an actual fault on the servo drive itself. It can be a mechanical problem, or something else or other time other bits are set, and no idea what caused them to go high.
@@spidergt80 sounds like the attributes of what was put in.
I teach this is in my servo course
I created a project a few months before with two axis. After watching this video i understand that i followed the right way. I also produced 1 degree cams with MAOC command. Machine speed is around 350RPM. And it worked with perfect performance.
Perfect video. Thank you boss. 😇
Glad to help
Wow. You're awesome. God bless you for sharing valuable knowledge! Keep it coming, please.
Thank you for the support