We hope you found this video helpful! A lot of time and effort goes into creating content like this. By hitting the 'Like' button and subscribing to our channel, you're showing us that our work is truly beneficial and this encourages us to keep going. Plus, your engagement helps others in need to discover these videos. Thank you for watching.
Will this work if SATA SSD with SanDisk controller and flash stopped being recognized as a device at all? Neither connected directly to motherboard, nor via SATA-to-USB adapter.
I have maxsun ssd 512 gb*6 i have used it as a external hard drive it is suddenly died not showing data it showing in diskmanagement disk 1 un located 1 mb space plz help me to find us to recover important data plz
I must get lucky with ssd's and hdd's from friends computers. I have always been able to recover their data just by putting the drives into an external enclosure and plug into another computer and find and save all of their data without any special equipment
If you understand File formats and bytes and bits and binary format. What happens is when this SSD was dead, it meant the File allocation Table was in disarray therefore Windows OS could not access to it. So, it was plugged and the software specialized for this es capable of finding all the bytes and bits, and reconstracts the FAT and you are a success.
PC-3000 I think that is a propiotary software, it also comes with hardware like and adapter or controller to d an indepth analysis and data recovery. Last time I check, this software and the hardware is manufactured by a company in Czech republic and the cost is about $20,000.
We hope you found this video helpful! A lot of time and effort goes into creating content like this. By hitting the 'Like' button and subscribing to our channel, you're showing us that our work is truly beneficial and this encourages us to keep going. Plus, your engagement helps others in need to discover these videos. Thank you for watching.
IT WASNT DEAD AFTER ALL SIMPLE EXTRACTION
if software sees the drive that means it wasn't dead at first place
Will this work if SATA SSD with SanDisk controller and flash stopped being recognized as a device at all? Neither connected directly to motherboard, nor via SATA-to-USB adapter.
Hello. Good video, thanks for sharing, do you mind if I ask, what is the software you have used? Cheers
Great 👍
Great video
If your drive powers up, it is not dead.
Is it possible to extract the firmware from a healthy ssd, to rescue another identical one?
Video is helpful
Great. Just curious what was the tweezers for?
Safe Mode
They’re jumpers on the board so when you place the tweezers on them, then it switches the drive into it’s built in safe mode
This ssd good or bad
I have maxsun ssd 512 gb*6 i have used it as a external hard drive it is suddenly died not showing data it showing in diskmanagement disk 1 un located 1 mb space plz help me to find us to recover important data plz
What is the software?
I must get lucky with ssd's and hdd's from friends computers. I have always been able to recover their data just by putting the drives into an external enclosure and plug into another computer and find and save all of their data without any special equipment
Very nice 👍
Hi,
I have 2.5 " laptop hard disk data recovery cost?
From India
Please submit a request in our website and a technician will be in touch with you.
How will the adapter work if the drive is dead? Key word - dead
repair the motherboard then
Second Drive and the rapairable is connected on second slot
If you understand File formats and bytes and bits and binary format. What happens is when this SSD was dead, it meant the File allocation Table was in disarray therefore Windows OS could not access to it. So, it was plugged and the software specialized for this es capable of finding all the bytes and bits, and reconstracts the FAT and you are a success.
I need that software
I have *Odopo* SSD Brand is Dead
What Software?
PC-3000
where i can download the software?
PC-3000 I think that is a propiotary software, it also comes with hardware like and adapter or controller to d an indepth analysis and data recovery. Last time I check, this software and the hardware is manufactured by a company in Czech republic and the cost is about $20,000.
Its not dead if the software sees it....
aceLab pc-3000
BUY A NEW PCB REWORK CAP SHORTING😊
when i did work for dod they let use app that makes yours app look like a kids toy
Good for you I guess...