Sir this video would be excellent without the background music, only with your knowledge, english subtitles and the beeps of the tool! That's all we need. Great job indeed, best regards from Italy 👋
I did find I have one that beeps on both... Thanks for the video🥇. Will check on cost for replacement or another motherboard if too costly to repair.... Music a bit loud, but desperation helped me bare it🥴💃🏾
Sir this video would be excellent without the background music, only with your knowledge, english subtitles and the beeps of the tool! That's all we need. Great job indeed, best regards from Canada
I urge you to use some flux and maybe remove the old solder/add new one. What you did is most likely a cold joint and won't last long IMHO. Nice video though!
hello...would you mind if i ask...kakabili ko lng ng Gigabyte Motherboard...as i test it wala pong signal ang LAN PORT..ano po possible na deffect nito?
I wonder, in a video so important what is the need for background music? if the test involves listening to the short, what does that add? lowered the video engagement to 30%.
Pretty cool, music too damn loud. Hard to hear the multimeter. Got a question though. Why didnt you use flux removing the mosfet. And putting one back on.
for those interested on my repair. i followed his steps, since i dont have the beeper feature, i used the ohm feature of my tester and i noticed 1 pin has 0ohm resistance and 1 pin has about 100000ohm resistance for good mosfet. for bad mosfet, both pins have 0 ohm resistance. i just salvaged a mosfet from another motherboard. though not the same, it seems to work but not sure for how long
Daaamn thank you so much bro i sent to one technician he said my motherboard got short circuit can't be repaired so buy new but your video made me to do it by myself please can you share use the tools used by you so i can arrange
Can you repair board for public? Have a project board that needs a new socket would love to see it fixed. Don't mind buying the part and paying for the time to see it fixed.
hello how are you,,, nice video very informative well done,,, i have a question a have H81 mobo, you can turn on the unit but not in the power pin of the mobo but on the terminal of the psu ( 3&4 or 4&5) . thanks
The loud background music is drowning out the beeps from the mosfet when you were checking them. Cant hear them clearly. Nice video but spoilt by the background music.
I have the same problem, the fan stopped running after 4 pin is connected. But all the mosfet beep on single leg. What are others inspection should I do?
Congratulations on your first video. Pretty informative. I have done this test in one of my faulty motherboards and two of the mosfets beep for a short time, not continuously. Does this mean they are broken? Thanks!
Very Good congratulation One question for the gun how much for the force of the air and how many degrees thank you very much explain I understand you better with you
Bruce Lee i use cellkit 805d, it like gordak or else, but not like hakko. I use 4 for air flow, and 4-4,5 for hot (about 330c-360c). But in high motherboard it's more hot than low med motherboard
mosfet should be the same when I replace it flux not necessary as I see or what and hot air very enough to solder the mosfet or I can use any other ways please answer as soon as u get this *By The Way, You Did Great Job*
1. no it can be any mosfet with right channel, package and minimally tha same or higher amperage 2. flux is NESSESSARY anytime when soldering 3. u can ose hotair, infrared or laser beam. soldering is just heating
So the open is bypassed without the CPU power plugged in. But when the CPU is plugged in it re routes the connection but ends continuity because of the open thus shutting down all power anywhere on the board.
2:20 Open MOSFET?? That's a short there -_- And who solders replacements without removing the old RoHS unleaded solder? Do it the right way, flood the area with generous amounts of solder flux and wick the old crusty solder. Tin the pads with good solder (leaded one lol) and rework back the MOSFET. Clean with IPA.
thank you for this explanatory video. i have a strix z270f which took an over voltage. only the red led (power supply) lights up. I like to do the investigation that you recommend. what is the name of the card inserted in PCI. is there a similar one for my model? what is the name of the heat gun? thank you in advance for your time
When a semiconductor reads continuity to ground on a lead that is not supposed to read to ground, it's not open! And a beeper is not a way to check resistance. you lucked out, we lost 6:24.
Video would have been educational 100% if 40% wasn't lost trying no to hear the music noise so you could concentrate, No one can concentrate on something 100% at the same time, It's impossible.
www.ebay.co.uk/i/233395324007?chn=ps&norover=1&mkevt=1&mkrid=710-134428-41853-0&mkcid=2&itemid=233395324007&targetid=878706529565&device=m&mktype=pla&googleloc=1006884&poi=&campaignid=9445849096&mkgroupid=104301045068&rlsatarget=aud-629407027585:pla-878706529565&abcId=1139126&merchantid=138360520&gclid=CjwKCAjw95D0BRBFEiwAcO1KDEPy4M-GYbmgik_Lyb3d1RIpXdsn9TEL3yLd4xNwaVkk3vMCD2DtwRoCaGMQAvD_BwE it's a pci voltage checker diagnostic thing
Where I have to send my motherboard? I cannot boot into BIOS because I keep getting Memory Error LED. I tried 4 different sticks in every single slot one at a time.
Really helpful video. but i have to criticize one thing: the music choice/audio usage in general here. (IDk why it is, but you immediately notice non-westerners by the cheesy, *annoying*, over the top music they pick lol). So firstly, the intro music is very irritating, but its short so okay, but id choose something more pleasing, inviting. Secondly, the background music of the video is better, (even though still a bit too noisy for a tutorial), BUT WTF is going on with this track? I kept taking headphones off cuz I thought there was children screaming/getting murdered outside 2:041:34 ect lol
Sir this video would be excellent without the background music, only with your knowledge, english subtitles and the beeps of the tool! That's all we need.
Great job indeed, best regards from Italy 👋
Next time please remove the background music. as long as there is captioning in english your videos are awesome.
@Gage Yousef funny how you and Adan both joined CZcams 2 weeks ago...
Yes. Felt like i was in an 80's techno club.
Just mute it bro i did that
naaaah maaan a bangerrrr
You killed it bro i appreciate a lot,,,thanks for this class... Background music doesn't affect,,instead you make me put 100% concentration
Helped me figure out what was wrong with my MB, thanks!
I also now have a video I can put on at house parties to get everyone dancin
Great video! The music is really annoying when trying to hear the beeps.
Thanks for this quick tutorial on using the beep thing and finding faulty mosfets.
I did find I have one that beeps on both... Thanks for the video🥇. Will check on cost for replacement or another motherboard if too costly to repair.... Music a bit loud, but desperation helped me bare it🥴💃🏾
Sir this video would be excellent without the background music, only with your knowledge, english subtitles and the beeps of the tool! That's all we need.
Great job indeed, best regards from Canada
Great video on 2023! I´m with this problem now with Maxsun A320M.2-VH, now i have an idea how to start to diagnose and look for a solution! thks bro!
I urge you to use some flux and maybe remove the old solder/add new one. What you did is most likely a cold joint and won't last long IMHO. Nice video though!
No one can concentrate on two things 100% at the same time, the music impairs the learners concentration.
Thanks anyway
great idea but hard to acquire spare parts.
I am a fan of no music but awesome work!
Thanks for this tutorial! I will probably be able to fix my PC that is down since several years!
shorted , not open... open has no deflection sir. btw good video.
Mr English teacher we hear u
Good work sir, i am addicted to these technical vedeos, i have subscribed to more than 30. I am profesional technician myself.
hello...would you mind if i ask...kakabili ko lng ng Gigabyte Motherboard...as i test it wala pong signal ang LAN PORT..ano po possible na deffect nito?
I wonder, in a video so important what is the need for background music? if the test involves listening to the short, what does that add? lowered the video engagement to 30%.
Must lower the background music at least 50% and when testing for the beep sound mute the background music and return when done testing.
Pretty cool, music too damn loud. Hard to hear the multimeter. Got a question though. Why didnt you use flux removing the mosfet. And putting one back on.
I found few MOSFET where there wasn't a beep on both on the contrary.
Nice 👍🏾 I actually learn something new
That was a great video. It was super helpful and it is exactly what is wrong with mine.
What if there's no buzz sound at all at some mosfets? Does it mean there's short too?
Great video, but the BGM is annoying.
thank you for this information!!!! this has literally save my motherboard. thank you
glad to hear you can repair your board...
hope you can also make tutorial for a completely no response motherboard. thank you
for those interested on my repair. i followed his steps, since i dont have the beeper feature, i used the ohm feature of my tester and i noticed 1 pin has 0ohm resistance and 1 pin has about 100000ohm resistance for good mosfet. for bad mosfet, both pins have 0 ohm resistance. i just salvaged a mosfet from another motherboard. though not the same, it seems to work but not sure for how long
@@breintajanlangit1622
That's a good idea ... I have a couple old Mobos with parts I can steal too.
Congratulations, excellent
it's good to see how to find the broken parts. the problem for me is where to find the replacement part
you can take it from another scarb motherboard or buy new from alixprs.
i have a mb that has that exact problem. gonna fix it. thanx bro.
clear ...music is loud a bit :D thanx man
what is the device you put in pci lane to check during power on? i do want to buy it online. very good video. thumbs up
Post card.
Where can I get the diagnostic board? Your video (except the audio ;-)) is very helpful. Thanks!
same question here!
It's called a POST (Power On Self Test) card. You can find them on ebay, amazon etc.
interesting one anyway its only demonstration , thats good friend
Remove background music 🎵
Hi, what if both the pins don't sound?
Thank you, great video. My mobo has a mosfet that has two beeps, also near it the small thing between it and the capacitor also beep both sides.
What mode we have to set multimeter?
Thanks for this tip! I could confirm the shot-circuit on one of the mosfets on my dead mb. Now I only need this dragon breath you used
Music is suitable for night club😌
Daaamn thank you so much bro i sent to one technician he said my motherboard got short circuit can't be repaired so buy new but your video made me to do it by myself please can you share use the tools used by you so i can arrange
Great help for me sir! thank you for this video!
You're awesome man!
Very helpful video!! Thankyou so much!
where is flux?
its not necessary in regulator
explain John please
@@johnserrano5025 Thats total BULLSHIT
@@danielsatko- flux function is just to retain heat which you could do by constantly blow really hot air
@@erticyusa5928 u really dont know a shit.
Fast and incisive !!!
Where did You stab the ground stick
I hear the disco music from that probe
Can you repair board for public? Have a project board that needs a new socket would love to see it fixed. Don't mind buying the part and paying for the time to see it fixed.
Music is not needed in these type of videos
Irritating music sound
background music should be low pls
nice work
its relaxing for me.😂
Dead mosfet? Yep.
Dead RAM slot? Yep.
Asrock? Yep.
EXCELENTE ,, MUCHAS MUCHAS GRACIAS,, MÉXICO CDMX
MANY THANKS but not easy to hear BEEPS with music, please consider this next time ?
hello how are you,,, nice video very informative well done,,, i have a question a have H81 mobo, you can turn on the unit but not in the power pin of the mobo but on the terminal of the psu ( 3&4 or 4&5) . thanks
Plz do not use back ground music
Otherwise ok
Keep it up sir
Music made it hard to hear. Subtitles were so hard to read as they were so small.
Apart from that it's a good video.
sorry, actually this is my first video i made..
what if there's no beep?
The loud background music is drowning out the beeps from the mosfet when you were checking them. Cant hear them clearly. Nice video but spoilt by the background music.
Can you turn down the volume of the beep from the multimeter as i cannot hear the music ;-)
Nasty BGM
I have the same problem, the fan stopped running after 4 pin is connected. But all the mosfet beep on single leg. What are others inspection should I do?
Sir my MOSFET is
Nikos p1703bdg uep16181
Ware can I buy
good ones 👍🏻
Congratulations on your first video. Pretty informative.
I have done this test in one of my faulty motherboards and two of the mosfets beep for a short time, not continuously. Does this mean they are broken?
Thanks!
Did you replace it yet? ofcourse it's faulty.
Sounds like a Neil Breen movie
Very Good congratulation One question for the gun how much for the force of the air and how many degrees thank you very much explain I understand you better with you
Bruce Lee i use cellkit 805d, it like gordak or else, but not like hakko. I use 4 for air flow, and 4-4,5 for hot (about 330c-360c). But in high motherboard it's more hot than low med motherboard
CoRE- Fixpc thx my friend I love yur work continu
ARE YOU IN CLUB ? TURN MUSIC DOWN
mosfet should be the same when I replace it
flux not necessary as I see or what
and hot air very enough to solder the mosfet or I can use any other ways
please answer as soon as u get this
*By The Way, You Did Great Job*
1. no it can be any mosfet with right channel, package and minimally tha same or higher amperage
2. flux is NESSESSARY anytime when soldering
3. u can ose hotair, infrared or laser beam. soldering is just heating
So the open is bypassed without the CPU power plugged in. But when the CPU is plugged in it re routes the connection but ends continuity because of the open thus shutting down all power anywhere on the board.
2:20 Open MOSFET?? That's a short there -_- And who solders replacements without removing the old RoHS unleaded solder? Do it the right way, flood the area with generous amounts of solder flux and wick the old crusty solder. Tin the pads with good solder (leaded one lol) and rework back the MOSFET. Clean with IPA.
thank you for this explanatory video. i have a strix z270f which took an over voltage. only the red led (power supply) lights up. I like to do the investigation that you recommend. what is the name of the card inserted in PCI. is there a similar one for my model? what is the name of the heat gun? thank you in advance for your time
When a semiconductor reads continuity to ground on a lead that is not supposed to read to ground, it's not open! And a beeper is not a way to check resistance. you lucked out, we lost 6:24.
So you want us to hear two beeps while adding loud music to repair video???? Come on my friend.
Cool man, thanks :)
Are the gloves you are wearing special? like anti-static or such?
Regards
Just wear an anti static wriststrap.
That was bad ass
great demonstration。 thank you.
Master kalo dah turun tangan ya kek gini (y) MANTAPSSSSSSSS
sy masih belajar bro...coz teknologi selalu baru harus dipelajari terus.
Wah ini ne yg ane demen,kek padi :D
Betul bg ... Lanjutkan terus karyanya
Sukses terus bg
Back Ground music is not required. video good . try Better Quality
great with subtitles in English ... but the music.... BTW i subscribe u....
thx for subscribe. next video will be better.
great demonstration thanks
Can you give me idea where to buy the mosfet parts motherboard? Especially online shoppe....
@@gemsmills7002 digikey
Thanks for the video but if there is no beep at all is it ok or not?
Kind of mediocre methodology, ram slot is dead because there's more faulty components that you didn't check or don't know how to check.
where do you connect the +ve and -ve wire of the electronic machine tester to make it valid? I am interested..I will try to fix what's broken..
Video would have been educational 100% if 40% wasn't lost trying no to hear the music noise so you could concentrate, No one can concentrate on something 100% at the same time, It's impossible.
Superb
I soppose to replace the defective mosfet the serial number is important its hars for me to find the same s.no.
Since this repair video only applies to this exact motherboard, you should state the make and model number in the title.
Glenn Watkins the motherboard is at least 20 years old.
Good one nice for learning
Can i ask you whats that thing in the PCI slot?
www.ebay.co.uk/i/233395324007?chn=ps&norover=1&mkevt=1&mkrid=710-134428-41853-0&mkcid=2&itemid=233395324007&targetid=878706529565&device=m&mktype=pla&googleloc=1006884&poi=&campaignid=9445849096&mkgroupid=104301045068&rlsatarget=aud-629407027585:pla-878706529565&abcId=1139126&merchantid=138360520&gclid=CjwKCAjw95D0BRBFEiwAcO1KDEPy4M-GYbmgik_Lyb3d1RIpXdsn9TEL3yLd4xNwaVkk3vMCD2DtwRoCaGMQAvD_BwE
it's a pci voltage checker diagnostic thing
what if they dont give any sound?they are faulty too then?
Where I have to send my motherboard? I cannot boot into BIOS because I keep getting Memory Error LED. I tried 4 different sticks in every single slot one at a time.
When intel boards were normal
Nice video but what if there's no beeping sound on mosfets
maybe it's not a fet
it is a mosfet its the 3leg one
Everything o.k. but ¿What if a mosfet doesn't beep in the two pins? ¿It's o.k or bad? Thanks for answering me.
sir where do the black probe connected while you are testing mosfet from red probe???
Background sounds very high
The song is from Kevon macleod-EDM mode
Did you replace your CPU? or did your cpu fry during the first attempt?
Really helpful video. but i have to criticize one thing: the music choice/audio usage in general here. (IDk why it is, but you immediately notice non-westerners by the cheesy, *annoying*, over the top music they pick lol). So firstly, the intro music is very irritating, but its short so okay, but id choose something more pleasing, inviting.
Secondly, the background music of the video is better, (even though still a bit too noisy for a tutorial), BUT WTF is going on with this track? I kept taking headphones off cuz I thought there was children screaming/getting murdered outside 2:04 1:34 ect lol
Let dance 🕺🏻💃🏻👯♂️
Slot is not dead!! They go in pairs on white connectors fodo
A great vídeo . But bad music.