Radiomaster Nexus • ELRS Telemetry Reuse
Vložit
- čas přidán 29. 05. 2024
- This video in this video, we'll spend a little time looking into ELRS telemetry re-use on Rotorflight and the TX16s.
PRODUCT [AFFILIATE] LINKS
► Radiomaster Nexus FBL: www.radiomasterrc.com/product...
► Radiomaster RP3-H Rx: www.radiomasterrc.com/product...
REFERENCE LINKS
► RotorFlight Configurator: github.com/rotorflight/rotorf...
► ELRS Telemetry Reuse Guide: www.rotorflight.org/docs/Tuto...
► RotorFlight Discord: / discord
► RotorFlight Setup Guide: www.rotorflight.org/docs/Tuto...
► Telemetry Re-use Commands: www.rotorflight.org/docs/Tuto...
RCVR MERCH and PRODUCT LINKS - If you use my affiliate links, the channel will receive a small commission. These links cost you nothing extra to use.
► RCVR-1 Orange www.etsy.com/listing/16830707...
► RCVR-1 Black www.etsy.com/listing/16808499...
► RCVR-2 www.etsy.com/listing/14977817...
► NEW Merch Store: rcvr.myspreadshop.com/
RCVR CHANNEL LINKS
► Support the work I do here on Patreon: / rcvideoreviews
► Discord - Hang out with the RCVR Crew: / discord
► EdgeTX Fest 2024: edgetx.org/fest2024/
#rcvideoreviews - Věda a technologie
NOTE: For MCU_LOAD make sure to set the precision to 0.0 to accurately reflect the percentage shown. In the video I showed 1.5% as MCU load. It was actually 15%. Changing the precision to 0.0 corrects the display.
I keep going and picking the things I need along the way, thank you!
Glad to help.
Another great video, John!! Thanks for doing these!! I have 8 flights on my Nexus so far in my OMP M4 and it feels really good!!
You're welcome! Glad to hear your Nexus is performing well for you. I've made a few little adjustments to my RAW configuration and am looking forward to flying more this weekend.
Follow-up on this subject detail is well appreciated. 😅
More to come!
Good news on the refactor for telemetry. I appreciate the devs finding creative solutions but it's also ideal to solve the problem at it's core if you can.
Yeah, I have high hopes the refactor cleans these issues up. This is a workable band-aid though.
Good video, thank you!
I wonder why the refresh rate of the NEXUS telemetrie values is so bad, maybe every 3 to 5 seconds. The data of the receiver come more quickly.
Is there a solution for this problem?
You can control the telemetry rate of ELRS in the ELRS lua.
Unfortunately I haven't had any luck with crsf_gps_altitude_reuse = HEADSPEED telemetry using EdgeTX 2.10.1 with RF2. I have also tried turning on GPS telemetry, magnetometer and setting a UART, but for some reason the telemetry isn't working. This works perfectly on EdgeTX 2.9 so I will have to revert back until this is resolved.
Did you turn on the altitude sensor on the configuration page?
@@RCVideoReviews thanks, yes all sensors are turned on