Kamado Joe CLEAN BURN - How to deep clean your ceramic components so they look new! KJ101
Vložit
- čas přidán 21. 04. 2021
- Spring is the perfect time to clean your Kamado Joe. I've not shown the clean burn process before in order to deep clean the inside of your Kamado Joe, but when we are done the ceramic heat deflectors and firebox will look good as new.
👉🏼 Did this video help you? Sharing this video with friends, groups, social media etc. helps others find me and is greatly appreciated! 🙏
----------------------------
Resources to Help Make BETTER Barbecue
----------------------------
Take control of your Kamado Joe with My Vent Setting Guide
► Vent placements for popular grilling & smoking temperatures (Daisy wheel, Kontrol Tower & SmokeWare chimney cap settings all included for Jr. & Series 1, 2 ,3 Classic / Big Joe)
► Best practices for setting up your Kamado Joe for hassle free fire management
► Solutions for common issues & Frequently asked questions
👉🏼 www.smokingdadbbq.com/shop
Unlock the FULL potential of your Kamado Joe with my Double Indirect Setup E-Book
► Fix dry / overcooked bottoms on long cooks like Brisket, Ribs & Pulled Pork
► Improve smoke quality (No more bad smoke/creosote)
► Recommended setup for best results on Jr & Series 1, 2 ,3 Classic / Big Joe)
👉🏼 www.smokingdadbbq.com/shop
FREE resources on www.smokingdadbbq.com
► Written Recipes / Ingredients
► Food temperature quick reference guide (FREE with newsletter signup)
► Quarterly News Letter with insider tips, giveaways etc.
----------------------------
💰💰💰 Gear Discounts💰💰💰
----------------------------
🌡MEATER wireless probes - t.jo.my/meater
💰 No coupon needed! Just use this link for 10% off site-wide
🖥 Meater VS Competition - • Meater Dethroned? The ...
🗑️ KickAsh Basket & Can - jo.my/kickashbasket
💰 Use discount code “SDBBQ” to get 5% off any order site wide!
🖥 Jump to 03:51 in my gift guide - • Top 10 Grill Accessori...
🔥 GrillGun and Su-V Gun from GrillBlazer - t.jo.my/grillblazer
💰 Use discount code “SDBBQ” to get 10% off any order site wide!
🖥 Speed test VS fire starters - • Light a charcoal grill...
🥩ChefsTemps instant meat probe - jo.my/chefstemp
💰 Use discount code “SDBBQ” to get 25% off any order site wide!
🖥 Review VS Competition - • The BEST Digital Therm...
🪵 Smoke North offset smokers - t.jo.my/offset
💰 No coupon needed! Just use this link for 25% off all accessories & pit upgrades!
🖥 Why I’ve switched to the Echo - • This Reverse Flow Smok...
🧂 Pepper Cannon (8-60 mesh 10x more per grind) - t.jo.my/pepper
💰 Use discount code “SDBBQ10” to get 10% off any order site wide!
🖥 Homemade rubs - • Are expensive BBQ Rubs...
🕳️ Smokeware drip pans & chimney caps - t.jo.my/smokeware
💰 Use discount code “SDBBQ” to get 10% off any order site wide!
🪨 Fogo Charcoal & BBQ accessories (Free shipping orders over $100) - t.jo.my/fogocharcoal
----------------------------
Gear I’ve used in videos without a discount
----------------------------
💨 FireBoard Drive - jo.my/fireboard
🔪 Tumblr rolling knife sharpener - jo.my/rollsharp
🍕 La Piazza ovens - t.jo.my/pizzaoven
🖐🏿 Nitrile prep gloves - t.jo.my/nitrilegloves
🔪 Dalstrong Knives - t.jo.my/dalstrong
*Some of these links are affiliate links. If you use them, I'll receive a commission and it will help me make more content like this for my channel.
Subscribe 👉🏼 jo.my/subscribe2sdbbq
Join as a channel member 👉🏼 jo.my/memberperks
Rub recipes & DIY table plans shared free on www.smokingdadbbq.com
Did I help make grilling easier for you? Send a “Super Thanks ❤️“ They’re appreciated 🙏
Dome alignment issues? This will fix it
- • Kamado Joe Dome alignm...
Kamado Joe care & maintenance. TOP 5 FIXES for common issues SOLVED!
- • Kamado Joe care & main...
Recommend Kamado Joe maintenance videos I mentioned in the video:
How to clean your Kamado Joe dome & FIX a stuck Kontrol tower top vent cap in 5min
- • How to clean your Kama...
How to tell if your Kamado Joe / Big green egg temp gauge is not working & how to FIX IT!
- • How to tell if your Ka...
#SMOKINGDADBBQ #Kamadojoe #cleanburn - Jak na to + styl
Must watch KJ videos:
KJ 101 (start here) - czcams.com/video/x3nvkwmwuFw/video.html
Top 10 KJ beginner mistakes - czcams.com/video/gdcaOjQt_I0/video.html
Dome alignment issue? - czcams.com/video/qWM6mFkfnmI/video.html
Top 5 KJ maintenance tips - czcams.com/video/gphUQFW6uIo/video.html
Don’t buy these accessories - czcams.com/video/ORcbo6fTHmk/video.html
Smoke wood secret - czcams.com/video/2qtHrFjWY1U/video.html
First 5 cooks for a new owner - czcams.com/video/JA84ZvYL47Y/video.html
Loved this one just like all your other videos! One way I discovered to make my life easier when re-assembling the firebox is to lay all the pieces in and place the metal ring on most of the pieces...and then use the ash tool to pull the pieces in towards the centre so that they'll all tuck in nicely! Thanks again for all your hard work!
great call Jeff
Being that I bought a used Kamado Joe Classic, this is exactly what I needed. Getting to cook our Thankgiving turkey. James, I really appreciate all the help as I prep for the big day.
thank-you, cheers
Did this today worked wonderfully well. Watched many of you videos, they are super helpful and to the point with great takes on manipulations you do. Keep them coming !!!
thabka. glad it helped!
Thanks James, just done a couple of low slow cooks and thought you would be the guy to let us know how to deep clean. Awesome 👏🏻
Glad to help
Thank you for making these maintenance and informational kinds of videos along with your cooks. Great info!
Glad you like them!
Just done a deep clean on my Kamado following your instructions - perfect! Great videos as always, cheers Greg from the UK!
Another great video James. Glad you are getting everyone involved with keeping their red beauties in peak performance.
Thanks
Thank you for this and many other KJ vids. Mine just arrived today, but I have been watching your advocacy vids for months and months as I have agonized over spending this much for a grill.
Glad it was helpful! those fears will drift away fast. you got this
Very helpful! I’ve got more gunk in my KJ after a bunch of low and slows
Expecting our first in a few months, I knew I had to up my "Dad Game". That started with a solid BBQ and thanks to your recommendations I'll be following suit with a JK Classic III in a few weeks (once in stock here). Your videos have been informative and entertaining. Feeling more confidant bringing this one more slice of dad life, though they are some big red crocks to fill ;).
haha the crocs will fit you just fine 😂
Another reason Kamado Joe is such an amazing piece of equipment. A few high heat cleans in my big green egg and it’s gasket was needing replacement.
the felt doesn’t like 700f this is true. especially if there is an over / under bite
@@SmokingDadBBQ this is indeed the best advice. I have a BGE and the gasket burned away right on the spots of the overbite. I'm too lazy to adjust it, it seals perfect even with the most smoke it doesn't have any smoke escaping from the seal.
I've had my Big Joe II for about 20 months now. I've followed basic maintenance routines including taking apart the firebox and doing a deep clean every six months. One thing I neglected was my deflector plates. Totally black with drippings, seasonings, and whatever caked on. The only way I figured I'd see white plates again is when I buy new ones...
NOPE! did this after tonight's cook. They're almost new. Fire box looks great too, not that it was bad. James you keep topping yourself. My Kamado Joe game has certainly improved since subscription to your channel over the winter.
Keep the great content flowing.
awesome, cheers Rob
Seeing this man's smile makes me excited to watch his videos and to use my kamado joe.
haha cheers
After using a Weber kettle bbq and a Weber smoker for many years I was recently surprised by my wife and son with a 24" Kamado. After using it a few times I can only wonder what I've been doing all these years on the other devices. Ive been looking a bunch of your videos and would like to thank you for all the information you're providing through this platform. Thumbs up from Belgium.
thanks so much and congratulations on joining the Kamado cooking crowd
I am a huge proponent of using a drip pan whenever possible. The Smokeware 14” version arrived yesterday; a beast of a drip pan.
💯 agree. SloRoller, the best offence is a good defence by using a drip tray to prevent too much junk from getting in it. when you’re done cooking, crank the heat to 425 and burn it off and next time flip the top cap to keep it as clean as possible. it won’t look new but it won’t provide bad smoke which is what you want
I place a sheet of aluminium foil on the heat plates when cooking ribs, brisket etc to prevent drips burning onto them
Very good points about a deep clean. Especially when you smoker just isn’t running right.
thanks Kevin
Nice one James! This is something I need to do more often and my KJ needs this now! Cheers!
haha thanks. cheers
Finally!!! KJ Classic III arriving in the next few days... this video will help me to keep it in tip-top condition. All I need now are some decent tongues and I'll be good to go.
congratulations
You have such educational content! Nice job James!
thanks 🙏
Your videos are informative and to the point. Good job, cheers
I appreciate that!
Great video James. 4 Days till see my baby(KamadoBig Jo) we move into the new house finally!! she in a storage Pod, so I know what I will be doing before my first cook now...
Be safe friend.
Brad.
That is awesome! congrats Brad
Hi James, thanks for the video, useful as always! A tip my Kamado joe dealer learnt me for keeping your grill grates always nice and clean is to give them a wipe with cooking oil just before and just after cooking on them. It just takes 10 seconds while your meat is resting and you'll see that after a few times your grates will keep a lightly "greasy" but clean patina on them, they will become more and more non-stick.. I apply the same method to my soapstone and the flexible cooking rack.
Great tip!
You can also use a canola cooking spray for the same effect. I do that on all my grills.
I love this channel and your content!!
Thank you so much!
Many thanks, new to Kamado joe, appreciate your knowledge
Glad it was helpful!
Hi James. Thanks for the video and all the videos you produce! They are SO helpful. What should we do to clean after a cook / between cooks?
You can bump the heat after a cook to burn off stuff and then next cook flip deflectors to keep them clean
I use a similar method, only i place the grates in the top position, and the deflector plates on top of them.
That way, the sidewalls get more heat.
I also fire it up a bit warmer, last time the pizza cook was on 900F. That also cleaned the ceramics quite nicely.
When the grates are cold again, you can rinse them under warm water and use a dishwashing brush. Easy as pie.
Good stuff!
Great video, thankyou. Learning so much from you. Cheers
thanks, cheers
Brilliant thank you for the video, really helps and yep defo works !!!!!
Great to hear!
Yet another great informative video. Thanks for sharing all your hints and tips with us James. Just taken delivery of our Classic 3 today. Any suggestions please as to what I should try first while I'm getting used to using it? I know what I want to try, (porcetta & ribs), but thought best to try easier cooks to start with. Many thanks.
ribs are pretty forgiving... go for it
Super helpful. Thank you.
Glad it was helpful!
Thank you for showing me how to clean those hard to reach places so that my meat tastes better. The wife will love this!
100%... if it was bad, this makes a big difference
Awesome! Thanks for the tutorial!
Glad it was helpful!
@@SmokingDadBBQ Yep! I know what I'm doing this afternoon!
@@brianakers2719 cheers
Ya I’m due for a good spring cleaning. Always lots of charcoal though my BGE during the winter. -30 c or even -40 c 🇨🇦 is a great time for a BBQ, just makes you appreciate the food more.
100%
And since it’s time to start cooking pizza outside again, a Kamado grill needs to be nice & clean or 🔥 at those high temperatures. One time I thought the grill was clean enough, fired it up early to preheat. Went inside to make the pizzas, but when I checked on it I could tell it burnt off the inside residue. Glad I didn’t have the pizza in it at that time. 🍕
One thing I read about and tried that works remarkably well is scrubbing the grates with heavy duty tin foil. Also, I clean mine after every use with my grill rescue brush. Check it out. Kickstarter campaign that works great as well with no wires
Great tip!
Hello James ! Another very nice video. But did you make a video, on how to clean soapstone ? Mine is all black and could do with a little freshening up. Thank you very much.
James, I have one word for you - Ash. Use it on top of the deflector plates. The fat drippings are absorbed, do not smoke or barely, helps deflector and firebox stay clean longer. How much, as much as you feel comfortable. Probably won't absorb all brisket drippings, but will prevent a lot. Or put ash in your dripping tray or around it helps all for the same reasons. If you do not move the deflectors it wont ash over the food. And after cook you just dump it. I haven't seen anyone using this trick, but it does work.
clever, haven't seen that in use before
James, thanks for all your videos. Just opened the lid after a deep clean and went to remove the heat deflector and it cracked in two. 650 degrees for about an hour..Do you know what could have caused that?
Thanks again James for another great educational video. Could you clean the soap stone in the same process?
Yes you can!
Will have to attempt this
100%
I’m shocked how well this worked on the deflectors. I’ll be returning to this video when time comes.
thanks
Also - on the Joe Jr. - how do you know when it is time to replace the gasket?
Mine is looking a little smooshed but the grill isn't even a year old. Thank you for all of your great content!
I will do mine when smoke leaks or it just falls off
👍🏼 nice job!
Thank you! Cheers!
Thank you!
You're welcome!
Great video. I just bought a Classic III, and your channel has been such a great resource. Thank you! A question: what happened to your custom table? Did you give up on it?
thanks 🙏. I couldn’t make the big Joe fit a space I built foe a classic. so stay tuned for version 2 this spring
Don’t forget to scrub the outside of your cookers. They look much nicer all shiny and polished up in videos.
They look good on the inside now.
I keep mine polished year round in and out. But I don’t get snow.
Nice video!
100% need to do what I did in the fall in this video again - czcams.com/video/MsOnv-3-73s/video.html
Thanks, I knew that it was possible. But with your comments much better.
Is this also possible with the pizza plate instead of the heat deflector.
Greetings from the Netherlands.👍🏻
Yes, absolutely. Cheers
Awesome!
Thank you! Cheers!
Just bought a Classic 2 used and everything is in great shape except it’s very dirty. Will do this first thing
congrats
Thank you for the video, it's very helpful!!... I have a question, how can I clean my soapstone?, it's the same for the heat deflectors?
Yes, exactly. Then mild dish soap and a scrub brush to clean it up like new
Great video. Wondering how I'd go about cleaning my slow roller and other hardware. At one point I left my grill after a slow and low and by chance didn't grill again for a month. The culture that was awaiting me must have been mid renaissance. I hit it with high heat rotating out all stainless hardware. Culture was gone my my slo roller warped just a touch. Nothing crazy, but how could I have approached this better?
I appreciate these videos - Ill admit its been a while since Ive watched them bc I stepped away from my kamado joe- Im ready to deep clean it and get back into it- but Im wondering how to deep clean my slow roller- and where did all of the amazon links go that you used to have for the prodcuts you use? I went to your website hoping tto find them there but they werent. Do you sill have them somewhere? Id like to buy the new heatproof gloves you had bc they look like they fit better than the original pair of yours that I bought. Thanks for doing what you do!
Hi. Thanks for your videos. It’s really helped teach me how to use my Kamado. Will those high heats damage or crack the heat deflector plates?
thanks. no the 600-700f range is well within factory recommendations
Thanks for the vid, very helpful. Can you check the link on the temp gauge video? When I click it brings me back to this video. The other two work fine. Thanks!
Done! Sorry for that, its czcams.com/video/5ew06oYnR8M/video.html
Thanks for the tips! Any thoughts on the Slo-Roller? No matter how hard I try, it is just caked on drippings all around the edges of the base. Also, any tips on the Smoke stack Cap? Your first video alluded to using simple green (I think), but mine just gunks up with grease and is hard to clean the sliding vent mechanism (especially in winter). Thanks for all your videos!
I find the best offence is a good defence (drip pan)... what that doesn't get, crank the heat at the end of a cook to 425 and wait for the white smoke to dissipate, flip the top of the sloroller for next time alternating up/down. The cap is easiest to wipe with a cloth when its hot, after a while you eventually need some degreaser
Thanks for the great video James. I'm going to do my first deep clean on my Big Joe III this weekend and also need to deep clean my pizza stone. What are your thoughts on putting the stone on the grill grates to clean simultaneously with the grill and ceramic? Will the heat deflector plates block too much eat to clean the stone at the same time?
the heat should be enough but you can always pull out the plates when they are done and do soapstone or pizza stone
I started my kamado joe jr today to do a cleaning on my filthy heat deflectors. I removed them, poured the charcoal, lit the charcoal and closed lid with the bot vent completely open and top ring fully open as well. I stepped inside for maybe 10 minutes only to return outside to my grill at 900 DEGREES! It can't believe it heated up to that temp so fast. I looked at my grill for the first time in the sun today and noticed what looks like tiny little cracks around the dome of the grill. I hope I didn't ruin it as I just got the grill about a week ago. I looked online at a few pictures and it appears to be what people call "glazed", just hope my joe jr is ok because I sure am enjoying it thus far, it's a great little grill
you're ok, all ceramic grill paint gets these little micro glazing
Thank you for this video. Do you ever take the entire firebox apart? The ring that holds mine is so filthy from slow cooks, as well as my slow roller. I’ve seen some people clean with a Dremel and wire brush attachment. Did your metal ring come clean with the high burn? How do you clean your slow roller? Easy off?
the metal comes clean from this. you can take it all out to clean behind the firebox which is a good idea also for spring cleaning.
SloRoller, the best offence is a good defence by using a drip tray to prevent too much junk from getting in it. when you’re done cooking, crank the heat to 425 and burn it off and next time flip the top cap to keep it as clean as possible. it won’t look new but it won’t provide bad smoke which is what you want
James, I have been watching and learning before I invest in buying a Kamado Joe or an imitation Kamado grill. One question I have is the type of charcoal. Can we use the charcoal they sell at the grocery store like Kingsford lor is there a particular type that you use amd what are the dofferemces. Thank you, Scottie
I have had my Kamado for 7/8 years. I clean my grates with steel wool and soap before every cook. I will not do a high burn as I believe it will burn the gaskets between the top and the base. There is certainly some wear on the gaskets with minimal smoke leaking out but doesn't affect the cook...so far. There is considerable build-up of black gunk on the inside of the lid but I scrape off occasionally and does not hinder my cooks.
The old felt does not like the high heat as much as the new style for sure, good call
You said you were up to 700 in a few minutes but my joe regularly takes 30-45 mins to get up to temp no matter the temp. Is there something wrong with it? I use the vents appropriately
What do you use to clean the soapstone? My soap stone has some carbonized food on it from last night and I dont know what to do to clean it?
Hello James,
Just a quick one I was trying to replace my gasket on Lgbe and was using something like acetone but a substitute alcohol smells like fuel to remove remnants of gasket and this poured a bit in the egg inner walls and it’s smelling bad like petrol , how do I get rid off the chemical smell ,do I do a deep clean thanks
Nice video! Thank you, itwas really useful. Do you also have some advice about how to clean the slowroller? Because you cant heatup the slowroller that high, right?
two things I’ve found. one drip tray makes a world of difference in prevention. second after your cook turn the heat to 400f and it will burn off the crap and be ready to go next time
Thank you smoking dad! I always use a drippan. Nextime i will try your method!
SDBBQ! - my dad and I both got kamados this Christmas and your videos have been our bible to cooking on the KJ. Thanks from both of us. One quick question what grate scraper is that? I saw you link it in a comment and cannot find it anymore.
i dont use it often, but i have a chef felton i believe its called
@@SmokingDadBBQ that’s it!
Have you considered putting the grill racks on the second position and the heat deflectors above? That should turn everything on the grill racks to ash and easily wipe off.
100% works just as well
Hi, please. How to clean slow roller? Or how I need use him without dirty? 😊 great idea for new video👍👍
Because seller tell me slow roller damaged when heat is more like 200celzius
will make one of those
Will this process help for mold inside the Kamado
Hi James. I liked this video but one thing I’m also interested in is how to clean the inside of the dome. The inside of my Big Joe is blistering or bubbling all over and in some spots peeling away from the surface. Makes me worried that some of that stuff, bleach ash?, may fall into my food as it cooks. Any advice on how to clean this or is it just natural?
Thanks, Edgar
saw that you found it already, good luck
Any ideas how to clean all the build up on the slow roller?? Can’t do a high temp clean and it needs cleaning bad. Don’t see any videos for this. Thanks!
I often leave it in after a cook, flip the top and run 400f until it stops smoking (20min or so)
Thanks, James! It is handy! Do you have an idea about slow-roller cleaning as it is unfortunately covered with tifflon (worst mistake of slow-roller company I believe) cleaning out of grease almost impossible without scratching?
ive heard mixed messages... not sure if it is teflon coated or not. Lately it seems more folks are saying its not, its just that the metal can melt above 500f which ive seen.
i found the best offence is good defence (drip tray)... then i turn the heat up to 400f after a low and slow cook to burn off the crud.. works well
@@SmokingDadBBQ thanks for an idea, I will give it a try!
Hi James great video btw 👌 have you by any chance got a link for the wire brush you are using to clean the grill grates?
thanks, its from - www.cheffelton.com
this one in particular - www.cheffelton.com/products/chef704
I'm just about to do a clean burn for the first time whenever the weather warms back up a bit and I feel like doing it. I see conflicting advice on what temperature to use. Some people say 650 F, and the result of that looks better to me, with all the gunk on the grates just turning to ash that easily brushes off the next day, and some people say 550 F. I've even seen people leave the grill grates out because high temperatures promote rust on them, and I'm just like... "u wot mate?"
i dialled it down from 750 as i don't want to rust the grates which happens in stainless steal 750-1000f range. 600 is enough to clean the inside and clean the grids and have your grill performing like new
Whoops I forgot my side shelves were not aluminum and I put my really hot grate on the side shelf and now I have grate marks on one of them. But man is my deflector plates gorgeous
oh no. yes the older ones melt
James - thanks for the video. Very helpful as always. For some reason, on my Classic 3 with both deflectors installed and grills on top, I can't get passed 210 degrees C (hood closed, top vent full open, bottom air feed full open). I'm guessing airflow issue and I need to fully remove the ceramic fire box and clean out?
sounds like a restriction of some sort. clean it out and put it back making sure things are spaced and aligned for air movement
@@SmokingDadBBQ Thanks James! How often do you to a full empty of the firebox? (I cook 2-3 times per week. First clean in 5 months). Also - do you leave the ash catcher and ash basket out when cooking for better airflow? Thanks as ever mate. Legend.
I've never left the ash catcher out but that's a interesting idea when trying to get real high heat for things like napolian pizza. I too have problem heating high heat using cheap royal oak charcoal... Can't beat 10$ a 15lb bag though...
James, does this method work on the cast iron griddles as well ?
this is too hot and will remove the seasoning (which is fine if you plan to start re-building your seasoning)
would you ever consider doing a video on how you store al your accessories, it's a struggle to find places
good idea. will do
Ottoman!
I see you use the "torch/flame thrower" is it easyer to use then a, one minut lighter?
it’s hard to ignore the connivence factor it has
I'm torn between the Kamado Big Joe III (24") and the Kamado Classic III (18"). Any ideas on how of you would choose one over the other? Thank you.
for me, the big joe is my favourite - czcams.com/video/aonMT8PDF1c/video.html is a video that i did going into the why
Hi James, can we include cast iron grate/griddle and the SloRoller plate in this burn process or is it essentially just for ceramic components? Thnks for your videos!
not the sloroller, it melts at above 500f ... the cast iron yes
Hey James, forgot to ask you how can I clean my Sloroller? It is filled with old fat drips and I guess it is causing some unwanted white smoke. Thanks
Not really related... But do you ever cure or season your kamados with a low burn for a few hours? Love the channel!
I do a break in burn. after that I let the cooking take care of the rest
How long does it take to reach the cleaning temperature?
Any tips on cleaning the slo roller? ✌️
it helps to try and prevent it with a drip pan first. after that when I remove the food I crank the heat to 400 and burn it all off. once the smoke goes from white to clear i shut it down and it’s ready to go
Do you have any tips for a deep clean on the soapstones?
you can have it in there for this and then clean it in a sink with mild dish soap and a green scour brush to get any last stuck on bits. then good as new (just slightly darker as it’s seasoned)
What is the easiest way to clean the soapstone that will give you great results
Great suggestion! you can have it in there for this and then use some water and dish soap to finish cleaning it once it cools down
Great video! But i can't find description how to clean soapstone. I tried to burn it but it had no big effect. What you can suggest?
Great suggestion! add it to this process and once it’s cool into the sink with some dish soap and a green scour pad
@@SmokingDadBBQ thnx! I will try.
Smoking Dad, I just moved back from the UK and I am wondering if my Ceramic BBQ will be okay to leave outside and using during the winter months. I live in Ottawa. Any tips on using it in the winter. Thanks, RM
I am a few hours from you. I grill no problem year round
Hi James great video but my deflection plate on Joe junior is completely black!? How can I clean them? Thanks
Or buy a new one? And next time use a dish to collect drippings?
I have a JJ and use the method here to clean it. You only need to hit about 500*F. Time at that temp will bake the junk out.
I use an 18" diameter shallow aluminium pizza dish lined with aluminium foil on the ceramic plates and slow roller. That way they never get dirty.
love it. i use a smoke ware 14" pan in the big joe as it matches the profile of the sloroller without exceeding it where it might change the air flow
@@SmokingDadBBQ I got the 18" aluminum for Kamado Big Joe III. Got it at Nella Kitchen Supply store in Hamilton, ON. I believe you can order from them online.
Question? I was told by a pit master not to clean your grates all the way cause that’s where a lot of the flavor is but I watch your videos all the time and value your opinion so can you please answer this question should clean your grill grates all the way?Thank you
i don't believe in doing non nature things in general (like soak in vinegar to clean to bare metal) even though I know lots of people ask how to do that. While I don't think my pallet is sophisticated enough to tell the difference between new grids vs. seasoned ones I generally let nature run its course. Pizza, steaks essentially replicate what we did here with a clean burn whereas pork butts and brisket etc. add some fats and oils into the grid which is a good thing
@@SmokingDadBBQ thank you now I feel great knowing that I am doing it right
Iv got mildew in my komado :( and in the rim seal. Can you help thank you
I have the Big Joe. I’m a newbie. Just got it a couple a months ago. I have been very successful at doing low and slow but my problem comes with inferno mode to sear. It never gets as hot as I would hope. What’s the secret?
there are only 2 variables... (1) airflow and (2) fuel so when its not working those are the two things to diagnose. Are there any restrictions on airflow like ash, the firebox not centred, too much charcoal blocking air vents etc.
Any tips on getting the inside of the dome white again?
very unnecessary but here is how - czcams.com/video/C1uZ8UJtW9I/video.html
I have found I get the same level of cleaning when I do pizza nights with the insert- is that your finding as well?
yes exactly... i seldom have to do this as i cycle cook types
Who's the guy u mentioned cooking Naan bread on the grill sides? Thanks in advance
I eventually did it in this video czcams.com/video/2GFrCyn2Gpo/video.html
700 degrees Fahrenheit 700 - 32 / (9/5) = 371 degrees Celcius. Thats right isn't it? Always difficult to count it back to degrees Celcius. In the Netherlands it is more usual to work in degrees Celcius. Works wonderfull by the way. My heat deflector shield was really dirty after leaking all the meat juices by mistake. It looks like new, I did only go to 290 degrees Celcius for about 30 minutes.
awesome. 290c is hot enough to clean
Can you do this with the soapstone in there?
yes
I just purchased a new Kamado Joe Classic II 18". Do I need to do a burn-in to remove any resudue left during manufacturing? If so, for how long and at what temperature?
I do a gentle 300-400f for 30-45min and close to help the gasket glue seal but thats just me. nothing else needed
@@SmokingDadBBQ Thanks - I would feel better doing what you've done.
What are your thoughts on the new Blaze Cast Aluminum Kamado? Can we expect a review soon?
I don't have one so I don't like commenting on products I haven't used, so please take my thoughts / bias with a grain of salt. I think the indestructible marketing spin is more marketing than a real benefit in particular when it comes to the heat retention / efficiency of a Kamado. There is such thing as too efficient.... the Weber summit Kamado and the Broil King Keg, and even my old large big green egg I would say are almost too efficient for their own good. While you might think this is a good thing (for saving money it is) the reality is a sputtering fire that is not burning clean which leads to a bad smoke taste. A fire burning openly provides better smoke rings and better taste which is why i like my series 3 joes so much... they are less efficient than any other kamado i have used and in return, the smoke quality is better than any other i have used
Great video and thank you for sharing! What is the best way to clean the slo roll? Again, thank you for all you do with these amazing videos!
Happy to help! SloRoller, the best offence is a good defence by using a drip tray to prevent too much junk from getting in it. when you’re done cooking, crank the heat to 425 and burn it off and next time flip the top cap to keep it as clean as possible. it won’t look new but it won’t provide bad smoke which is what you want
@@SmokingDadBBQ thank you for the guidance. that was one in particular I was wondering about.
@@SmokingDadBBQ That is far easier and cleaner than bringing it into the house to clean it in the kitchen sink. Thanks for that tip on cleaning the slow roller.
I don't have a KJ, but John Setzler's method for cleaning the Slo Roller is a wire brush head on a drill if I remember correctly.
@@praetorxyn I prefer prevention with a drip tray and clean burn at 425 after each cook rather than removing the paint with a brush