Can you Woodturn Patterned Plywood?
Vložit
- čas přidán 9. 06. 2023
- Thanks to this week's sponsor, Foreo. Click foreo.se/zdxg for 21% off the Foreo UFO2
You all have asked for it for years! This week I’m finally testing out what happens when you turn Patterned Plywood on the lathe.
The Patterned Plywood Pre-Sale is live! Pick up a Patterned Plywood Panel for your next project (Or a project in about 2 months because they are hand made, and it’s going to take a bit of time 😜) www.almfab.com/store/p/patter...
Thanks to Rockler for sponsoring this channel
Rockler tools used in this video:
Woodturner's Multi-Roll Sanding Pack www.rockler.com/woodturners-m...
Rockler 3-Piece Silicone Glue Application Kit www.rockler.com/rockler-3-pie...
Rockler Excelsior Mini Lathe www.rockler.com/excelsior-min...
Mini Ergonomic Carbide Turning Tools www.rockler.com/carbide-mini-...
Rockler One-Handed Bar Clamp www.rockler.com/rockler-one-h...
Rockler 12'' Quick Release End Vise - www.rockler.com/12-quick-rele...
Rockler Marking and Measuring Tool Pouch www.rockler.com/marking-and-m...
Affiliate links to products used in video
Roarocket Dyed Skateboard Veneers www.roarockit.com/skateboard-...
Robert Sorby Lathe Turning Tools Set amzn.to/45WLnDH
Nova Chuck- NOVA 48293 PREMIER PRO-TEK G3 CHUCK Bundle amzn.to/3X0juXh
Tormek T8 Sharpening System amzn.to/3P9SJOx
Tormek TNT - 808 Woodturners Accessory Kit amzn.to/3NnpDtJ
Wixey Digital Angle Gauge amzn.to/3AqSW7P
Sawstop 36" 3 HP Table Saw amzn.to/3Jo4oEb
Free Push Stick www.almfab.com/store/p/free-p...
Festool Dust Extractor amzn.to/43PmVlN
Festool Kapex KS 120 Miter amzn.to/3kRuesf
Festool TS55 track saw amzn.to/3hTyPIU
Festool Random Orbital Sander amzn.to/43nJCxM
Titebond 3 Wood Glue amzn.to/3AVBgSn
Milwaukee M18 Drill and Driver - amzn.to/41g6HkU
Milwaukee M12 Drill and Driver amzn.to/40A6Rn4
Ratchet Strap Clamp amzn.to/45QOblS
Harvey ALPHA HW615 bandsaw - www.harveywoodworking.com/col...
Japanese Pull Saw amzn.to/3NKdwnm
Glue Spreader amzn.to/3P3J2Rt
Total Boat Epoxy www.totalboat.com/products/th...
CA Glue amzn.to/43rCpNn
Face Shield amzn.to/45TTy3C
ISOtunes PRO 2.0 Noise Canceling Headphones bit.ly/almfabiso
Camera Gear
Sony a6600 Mirrorless Camera - almfab.com/sony-a6600-camera
Cage for Sony a6600 Camera - almfab.com/rig-cage-sony-a6600
Camera-Mount Shotgun Microphone - almfab.com/shotgun-mic
17-70mm f/2.8 Di III-A VC RXD Lens for Sony E - almfab.com/tamron-lens-17-70m...
77mm NXT Plus UV Filter - almfab.com/uv-filter
577 Rapid Connect Adapter with Sliding Mounting Plate - almfab.com/rapid-connect
MT055XPRO3 Aluminum Tripod - almfab.com/tripod
Orion Jr DVC50 4' Compact Camera Crane / Jib - almfab.com/camera-crane
Aluminum Travel Tripod - almfab.com/travel-tripod
MC RGBWW LED Light - almfab.com/mc-led-light
PavoTube II 6C RGB LED Tube Light (10") - almfab.com/pavo-tube-light
Heavy-Duty Portable Tripod Dolly - almfab.com/tripod-dolly
360° Pan Lockable Bearing Mount to 3/8" Tripod Legs - almfab.com/bearing-mount
Tilt Brake for Orion DVC200, DVC210, and DVC250 Camera Cranes - almfab.com/tilt-brake
Links to other CZcams videos mentioned:
Applying a CA Glue Finish (How-to pen turning) - Craft Supplies USA • Applying a CA Finish (...
Hexagon Patterned Plywood | How to - Alm Fab • Hexagon Patterned Plyw...
Thanks to
TimberlandPRO www.timberland.com/timberland...
Totalboat www.totalboat.com/
And Rockler www.rockler.com/
for supporting this channel
Instagram @almfab / almfab
Pinterest @almfab / almfab
Facebook @almfab / almfab
TikTok @michaelalmfab / michaelalmfab
For Alm Fab gear like hats, sweatshirts, and stickers visit www.almfab.com/store - Jak na to + styl
You can use a forstner bit in your talestock to reduce the amount of cutting and give you a starting point for the inside of the bowl.
Yes, this is a great technique, also good for getting the depth.
Yeah I was gonna say, this was like watching Andy Dufrenes dig his way out of his jail cell with a spoon!
Saved me for mentioning this. Also removes the pesky wiggly bit in the middle.
The patterned plywood looks so cool with the colored veneers. You could use the extra cut-off strips to make bookmarks, or you could use them as a patterned plywood veneer as accents on another project
Bookmarks!❤
I would buy a bookmark!
Be sure to make a defined foot on bowls. A little undercut around the edge will do a lot to elevate the piece. I’m a potter in addition to being a beginning woodworker.
I missed that detail as well 😊
The thin off cuts could be mini paper lanterns or beautiful ornaments 🙂
Great idea, also maybe even epoxied bookmarks? Or even earring blanks? I think his partner she would do an amazing job on a product like that!!!!🤍❤️
Or tinder for a fire 👍
First off let me say I am so impressed with all your discoveries every time you make a video on pattern plywood. We get to learn a lot with you on your journey.
Second as somone who turns often, let me offer you one piece of advice. There are different gouges made for different jobs. When you roughed out the handle for your table saw you used your bowl gouge ( pointed gouge with swept back bevel). You’ll want to use the roughing gouge. ( shaped like a half pipe with bevel that dosnt sweep back). Turning is a beautiful art and success makes it so enjoyable. Using the correct tools will give a better success rate. But I have to give you props in breaking out the skew chisel. Even as a seasoned turner I know the best way for me to blow something up is the skew. They don’t call it “the taming of the skew “ for nothing.
Other than that another superb video. Keep up the great work and I always look forward to more of your videos
Isn't that a fingernail profile gouge and not a bowl gouge? Serious question because I've never heard that style of gouge called a bowl gouge. It can be used as one. It is more of a hybrid between a bowl gouge and a skew.
I've done a fair bit of pattern plywood turning in the past, roughing gouges are terrible for it because you're turning endgrain. In the same way you shouldn't use a roughing gouge on a bowl, roughing gouges on plywood suck and can even be dangerous. My favourite is the skew (not used like a scraper) for turning plywood, you get a much nicer finish
You are a brave man for turning your first bowl so big and a composite as well
This seems like exactly the sort of thing to send to Frank Howarth!! He does a lot of segmented bowls that are, effectively, patterened plywood but minus the ply, so he would have a lot of experience working with that sort of fragmented material!
Also, wow, the ai-generated spam comments are truly wild.
I loved Howarth's segmented wood-turned-ball video he did about a year ago.
Took the words right out of my mind!
Watched through the video twice. Absolutely great work. That CA glue polish was brilliant!! Much thanks for linking that video as well, it was quite interesting!
came in here to suggest this! i would actually love to see them do a collaboration, they both inject a lot of creativity into their projects and clearly have fun with things
Just been watching your video, I turn a lot of items made from old skateboards, and for someone turning laminated wood for the first time you did amazing. If you have a go a turn a “normal” bowl you’ll be amazed how much easier it cuts, you are properly learning to swim in the deep end. When I made my first skateboard bowl I also experienced the gouge heating up, however a lot of the heat comes from the bevel rubbing and the pressure on the bevel, I struggle to explain it but as you progress you’ll notice the gouge doesn’t heat up as much & you have to sharpen it less, again on my first skateboard bowl I must have sharpened my gouge a dozen times. Hollowing it you went for a deeper bowl than I’d normally do, kudos, as you found the gouge gives a better finish when turning laminates but deep carving is tricky. Personally I always go for a tenon over a mortise as if there’s any faults in the glue up the chuck can cause them to split. However amazing first time turning veneers as as I said if you master it turn “wood” will seem easy in comparison
He definitely has some angles to learn with his fingernail profile gouge. Normally a bowl like he made takes a single sharpening. It is hard to explain on the internet what he should look for when he is roughing out a bowl as far as gouge angle etc. But you hit the nail on the head for sure.
"Visually digestible" is a great design language term! Conveys a ton about design decisions very simply 👍
Dude this looks so good!! It's really impressive and I can tell this opened a whole new world for you to explore. So excited to see where you take this idea
Love seeing your craft expand into these new things. You are such an artisan and I love the inspiration you exude and passion you put into everything you create. Keep up the amazing work Michael!
Impressive persistence! Very cool results, the lathe adds a new dimension to the patterned plywood for sure!
I'm dying when you blew into the bowl and started choking on sawdust. That was hilarious cause I'm 100% certain every woodworker has done that.
Outstanding. As always, thanks for including the challenging moments we all fear but learn so much from. The bowl is magnificent! It was as much fun seeing you discover new ways to make the pattern blocks, and then make them even more efficient.
Fantastic video, my thanks❣
I've recently purchased my 1st lathe and videos such as yours, where things don't always go to plan, are invaluable to my development.
I appreciate you including the entirety of your project, from inception to completion, along with your narration & thought process in problem-solving.👍
It was nice to hear and see the details of your turning learning process.
You could probably send the cut-offs and shavings to Peter Brown. He does a lot of neat resin + strange material bowls and projects if you aren't familiar.
Amazing work once again, you never cease to amaze! When I was taught to turn bowls, we always glued a scrap disc to the bottom of the blank, with a piece of paper in between. Screw on the adapter plate, do all your turning (inside and out), carving right into your scrap if you want. When the turning is done, split the bowl off the disc with a chisel, the paper should let it split away cleanly. Sand the bottom, and you're done. Also my wife says to use the scraps for bookmarks. Thanks for another great video.
AND LOVE THAT LITTLE HANDLE SO MUCH MAN THAT IS SO EFFING COOL!
Absolutely brilliant idea and execution! If you haven’t already found a use for the offcuts from trueing the large blank, they would make insane handles for a marking knife. They look about the right size anyway. I’d love the opportunity to make one for you, but it’s an easy enough project to tackle yourself as well. I always love seeing where your creativity takes you, and thanks for sharing!
19:48 seeing as it’s a, I guess, “leverage handle,” (idk the scientifical term) it probably wouldn’t have hurt to use a longer bolt set the full length of the handle, or most of the length so it’s not exposed at the end, to give it more rigidity. That probably would’ve prevented it from breaking unsupported on the lathe and would prevent it from breaking in the future
Thus turned out amazing! I love watching your patterned plywood videos. They are inspiring. We actually found an old lathe, like a huge industrial one. Not sure what to do yet!
I thoroughly enjoyed watching this one Michael! You continue to amaze!
As talented as you are with wood, it’s exciting to see you experimenting with lathe work. The handle and bowl are stunning as are the multicolored veneers.
The thin offcuts look like wood box top veneers or cut into pendants or earring pieces.
Looking forward to future vids. Great job! 👍
I think you could layer those shavings together, epoxy them like Cam from Blacktail did with his denim table, and then turn that into a matching spoon/knife/fork/spork handle. I vote spoon though, because spoon is the best word out of all them. Great video once again, cannot wait to finally get started in my little shop and try some of your projects!
I'm glad you stuck with it. The finished product is fantastic!!
Nice job for a first bowl turning! I was hollering at you through the whole turning process trying to tell you what you were doing wrong! :) Great job getting it done! It turned out beautiful! Regarding the offcuts, I'll cut them up into smaller pieces and put them all into a mold and either pour a rising Charcuterie board or make an epoxy bowl!
Great turning👏🏼 The bowl is beautiful.
Michael, I've been following your work with pattern plywood for a long time. I am fascinated to see what comes in this video, but I have paused it to hit you with a 'before' comment. Your creativity and explorer's urges are a big part of why I follow you. I share your excitement going into this experiment.
8:55 you're learning the ways of the candy maker. Well done!
I think the shavings would be great bookmarks!
I recently found your video, and I am loving your creativity. Admittedly, I am a bit intermediated about the process; however, after seeing how great your rip fence handle turned out, I am eager to try it for myself. That was amazingly cool, even if the blue did not turn out the way you had hoped!
The plywood that keeps on giving - and a nice sideline in confetti too! This can only keep getting better, with practice etc. And with the variables for making blanks almost endless - this should prove very interesting.
Awesome looking bowl & kudos to you for trying something on the larger side for your first time; turning bowls are so much fun, especially natural edge bowls!
Wow look so amazing for your first bowl with pattern plywood. Can’t wait to see what you do next keep up the amazing work
The shavings you have can be used for some amazing bookmarks, i don't read but i'd be happy if i had one of those as like a bit of decoration... it'd fit well with the style i'm going for in my room... btw this is the first video from you i've ever seen and it's great content! Earned yourself a sub!
The bowl looks totally "AMAZING!!!!" I just love the beautiful pattern of the wood.
Turned out to be gorgeous! Great work
Congratulations on learning a new skill and sharing your journey with us!
Man, you gave us like 3 videos worth of content in one and I love it!!
Beautiful job!! I love the pattern you chose!!
Awesome final shots!
I'm SO happy to see you back with a video Michael!
Awesome! Fabulous! Stunning! And more! Seriously, Michael, just a great job on your first turnings, beautiful projects and they look so good with the thicker veneer.
I may even buy one of the panels, even though I don’t work with wood. Just to have one because they are so gorgeous.
These videos are my Saturday morning cartoons. Even had my Almfab hat on while watching!
Cool video. As a learned woodworker this really appeals to me. And you can learn so much more from a try-and-fail video than a perfect display of how a master does it. 👏🏻👏🏻👏🏻
Love all the creative ways in which you use patterned plywood and I respect the drive for an efficient use of materials. Geometric morphing is a fascinating subject, especially when it's financially incentivized ;) For the thin shaved offcuts, perhaps you could use them as plumage for a potential bird sculpture? Leaves on a carved sapling? I look forward to seeing whatever you make of them. Thanks!
Very cool! I amazed at how much anxiety I felt watching you turn both the handle and bowl. Great work.
*_I'd love to see an entire wall covered in one of these panels you are selling._*
YES! This has been on my mind since the first time I saw this patterned plywood. I can just see it.. it's gonna happen one day and it will be in my living room :)
Inspired by your original videos on pattern plywood, i went to messing about in my workshop with what i could do.
I find it really interesting that we have both found the same processes and discoveries.
I too was concerned with how the center of a log glue up would come out. But had the same reaction as yourself when i saw the resawn pieces had come out so well.
I have a few machines that desperately need upgrading, but when that's done i have some really stunning furniture designs to prototype and build.
I love your enthusiasm for this. Also super sick project. I would display that in my home.
Some beautiful chatoyancy in that spindle. And well done on that finish. Looks amazing.
Love the bowl! 😍 And you had some cool transition shots in this video 🤘🏼
This was probably the most suspenseful of your videos yet. I actually felt anxious near the end after it popped off the lathe a few times.
Really relieved when you moved the tool rest inside the piece. I'm no expert woodturner, but I suspect that was part of the reason you found it tough when the bowl got to its deepest - the forces end up getting magnified due to the position of the pivot point. When your rest is close to your workpiece it's working for you, and the more your tool is overhanging, the more it works against you.
This quite possibly one of my most favorite videos that you’ve uploaded, as an aspiring woodworker, seeing try something for the first time, and working through all of the difficulties, is awesome! Another idea I think you could definitely try doing, once you’re more comfortable with woodturning is make your own patterned plywood/colored patterned plywood handles for the lathe!!!!🤯🤍
Loved the video Michael and congrats on working on a new skill! Traditional wood turning gouges are all about tool presentation. That takes time and as you eluded too plywood probably isn’t the easiest material to start learning on. It’s hard to tell from the video, but I think your tool rest may have been too high. If your handles are long enough they should be tucked into your hip when the tip of the gouge engages the center line of the wood. Your inside cuts are a push cut, you kinda want to do that on the outside too. Most of your tool presentation on the outside was scraping cuts, which are fine but the tool has more versatility and you can get a better finish with the push cut.
It will all come with practice. Keep it up!
Everything looks awesome!
I'm a hobbyist quilter and all your patterns gave me LOADS of ideas. I was asking "how do I sew this ? " I printscreen a lot of the patterns to add to my ideas files. Thank you. ( I understand perfectly when you asked what else can I do with this ? 🤔
I tend to find that when hollowing out a blank the best thing to do is to pull toward myself and take deep cuts. (Catching against the wood is mainly avoided with technique; keep practicing). As mentioned by someone else: drilling out the center (using a chuck attachment on your tailstock) helps a ton. And when you’re turning spindles: I hope that you’ll try out placing a finger or two against the toolrest for added control. This can evolve into planting your palm against the toolrest and pulling on the tool with hooked fingers for hollowing out objects.
I've seen thusands of wood turning videos and never seen tools so shiny and new.
Your lathe gouge technique was interesting lol. You had the bevel kinda inverse to what is normally done. Also if you lower your tool rest a bit, you can ride the bevel and still cut on the center of the spindle. But at the end of the day, your results were fine, but you aren't giving yourself any bevel supporting the cut, it will catch easily like that
Ok. I'm glad I'm not the only one thinking about how he cut that 🙂
I was like, damn, have I been doing it wrong?
This is fantastic!!!
Finally you’re using Roarockit veneers! I love using them to make my own rainbow plywood!! I like to alternate the grain orientation though.. makes for flatter and more stable
You talking about how the veneers are usually used for skateboards is making me think that a patterned plywood skateboard would be pretty cool!
You create such beauty. I love watching your channel.🌸
Looks awesome!
Something you might find helpful when turning pattern plywood, epoxy/wood, or generally fragile turns. Get a drill chuck you can put in your tail stock. Use it as a drill press and gradually step up the diameter of the drill bit. Use some carbide chisels to hollow out from there. Will save you a lot of time and probably a project or two from breaking.
And great job for your first bowl. I like how you first real project is with one of the hardest things to turn without breaking.
So awesome Michael! Great work.🤩
Nice job on the plywood patterned bowl Michael! Thanks for always sharing with us!💖😎👍JP
Anything Murphy or secret cubbies and doors, laundry hampers, tables, for small living spaces
Also using tall ceilings for using vertical space for furniture like a reading nook, or a three story bed-mini loft-lookout
You do great work!
Carbide scrapers are nice and easy for hollowing. Rodeo turning, amazing plywood. Turned out pretty neat in the end. Awesome content!
Very impressive work!
That handle looks so awesome!
You sir, are the master of patterned plywood!
If you were to build (or source) something that has the same mechanism as a hexagonal bootlace ferrule crimper you could (in theory) get substantial clamping force evenly across each face. Awesome video, love the experimentation
As soon as I saw those very thin and unique offcuts, my mind went immediately to book marks!
So great, the result is so amazing 👍👍
Fascinating results, Michael! FYI, I am confident that we could create a bowl blank with about one eighth the material that would require MUCH less labor to turn. I'll have to give it some thought, but it is certainly possible. A long time ago I said that I was happy to provide some support because what you were doing was so innovative, even if I didn't see myself using it. I'm starting to see ways pattern plywood could fit into my aesthetic. Innovation leads to more innovation, right?
More really good work, man! Thanks and congrats!
0:20 Aww, that is just adorable.
Very good ideas and very good works . Many compliments !
Came out great. Those turning segment are nerve wracking.
Great job on the bowl😊❤
I absolutely love this channel so theories to watch you
Very cool look! I like the colorful veneers.
Idk if it's more reliable but peter brown usually glues on a sacrificial piece of wood for the chuck to grip onto at the bottom then cuts it off later.
That is exciting stuff. Thank you.
Love the content as always! You should try to make your own colorful plywood using the veneers, I think that would be next level
Dude, that looks so beautiful. And I definitely have table saw fence handle envy right now. I need to get going on the miter saw station so I can get a lathe as well lol.
What a great shop U have. Thanks for all the ideas
Super cool results!
The scraps really reminded me of feathers. I was imagining them decorating the sides of a mask (the kind you hang on the wall, not wear). Perhaps more importantly, if you go to make a hollow piece like a bowl in the future, if you can glue it up in the 4 quarters of the piece, you can then use a saw to take off a lot of the material that you would otherwise have to carve out of the middle. So you recover more scraps and save time. I learned this from carving watermelons, they are good practice material if you want to measure angles and understand what you will get wyen you reassemble.
Great video. Makes me want to get a lathe. I’ve always wanted to try it.
Having just watched the Rabbit boxing video before this, i thought the fur on the sculpture was incredible, and the pattern ply wood shaving would look amazing used on something like that
That lathe reveal was so cool
Nice work!
Cool looking bowl.....
Nice job 👍👍
I will be turning my first projects since middle school soon. (LONG time ago)
So It was nice to see another newbie going at it and show me what works and what doesn't work. So thank you.
Take care,
~Jonny5🥁
Incredible!
For the shavings: drawer front with a solid wood exterior frame and a middle portion with the shavings randomly scattered, held together by resin :)
"I think I learned a lot on this handle turning, I got a grip on..." lmao. Got a grip from making a handle.
Love your shop layout.
Maybe use the mini cutoffs to make a lampshade or a luminescent orb?
Great project. I applaud you for putting your learning process out there. As a long time turner, I'd offer two suggestions: 1) More clamps and pressure on your glue ups; and 2) a tenon rather than a mortise to use with the chuck is much stronger. Your "squeeze" clamps don't give you enough pressure for lamination work, plus you need cauls to hit the center of the sheets. For segmented turning, every single spot has to be a solid glue joint. I think you'll find those will give you much better results. The tenon on the end is much stronger because it's putting the wood under compression rather than a mortise which is pushing the wood apart and its strength is dependent on having plenty of wood outside the mortise (but the physics are still working against you :-) ). Good luck and keep up the good work. You'll have a lot of fun with turning square patterns into round objects.