Insane RC Helicopter Crash - The Craziest Omphobby M2 V2 Heli Crash On Youtube 🇸🇮

Sdílet
Vložit
  • čas přidán 11. 09. 2024
  • OMPHOBBY M2 Explore Helicopter: bit.ly/2YaWsQv
    S2 Legend Helicopter:
    bit.ly/3Jgama7
    FLYWING FW450 V2 Helicopter: www.banggood.c...
    FLY WING Bell 206 Helicopter: bit.ly/3rqR2Nq
    Eachine E160 Mini Helicopter: bit.ly/2XIaF7a
    Use 10% Off Coupon Code: bgdavis
    XK K100 3D Helicopter: bit.ly/38piSDh
    Eachine E130 Helicopter: bit.ly/2U2du0F
    ALZRC FAST X360 3D Helicopter: bit.ly/36raBxH
    XK K130 Helicopter: bit.ly/37DgHfe
    XK K110 Helicopter: bit.ly/3i5szZJ
    XK K123 AS350 Scale RC Helicopter: bit.ly/30FnXmA
    EUROCOPTER EC145: bit.ly/34F5VSj
    OMPHOBBY M2 Explore Helicopter: bit.ly/2YaWsQv
    OMPHOBBY M2 EVO
    #helicopter #rc #gopro #andrejsturm

Komentáře • 60

  • @top_G_82
    @top_G_82 Před 3 lety +18

    I find it very strange the fact you didn’t hit the cutoff switch as soon as you seen the heli going up fast pirouetting

  • @tomatwalden
    @tomatwalden Před 3 lety +14

    I believe that the OMP ESC has a cut-off if it detects an overload - it's there to cut the main rotors in the event of a crash. However, I can easily believe that you got grass momentarily in tail rotor causing an overload to the ESC for the tail - which would have immediately cut out the tail rotor causing the massive spin.

    • @AndrejSturm
      @AndrejSturm  Před 3 lety +3

      I think that your explanation is correct 👍

    • @henrik3129
      @henrik3129 Před 3 lety

      @@AndrejSturm That was my thought also. Tail snagged a straw.

  • @carlos64030
    @carlos64030 Před 3 lety +7

    Wow, that was freakin' nuts! On a side note, that OMP is built pretty tough to withstand a crash like that. I expected to see a lot of broken parts.

  • @markrice23
    @markrice23 Před 3 lety +7

    Maybe you got a piece of strong grass tangles in the tail and it jammed, hence all the spinning.

  • @Gggggghhvvbbb
    @Gggggghhvvbbb Před 2 lety +5

    Nothing wrong with this heli… when you hit the ground with the tail hard enough the esc shuts down the tail until you reset the system. It just happens. Just hit hold and try to level out and not climb so high. I’ve done more then a few times. Sometimes if you hit hold fast enough and hit the ground with not so much inertia the heli is usually okay and after you pull the power and reboot.

  • @navigator2011
    @navigator2011 Před 2 lety +3

    Even with the tail spinning, it is possible to reduce throttle until the heli is just above the ground and then you hit throttle hold.

  • @oreoandzig
    @oreoandzig Před 3 lety +2

    That's the best heli crash I've ever seen on youtube.

    • @injest100
      @injest100 Před 3 lety

      I found a better one. Hold your beer

    • @injest100
      @injest100 Před 3 lety

      Now this is the best crash ever czcams.com/video/BD1cnPMUR4E/video.html

  • @v4zzy219
    @v4zzy219 Před rokem

    awesome freaking crash! You were not lying in the title of the video lmfao!!! 🤣

  • @epoweredrc
    @epoweredrc Před 2 lety

    wow that's awesome you caught it on camera... i have had it happen. I was just thinking don't get to low in the tall grass or your tail will stop working then BAM that is what happened.. Thanks for a good laugh. I love my M2

  • @RaptorRotorHead
    @RaptorRotorHead Před 3 lety

    Confucius say woman who fly airplane upside down have hairy crack-up

  • @kevosrcadventures9019
    @kevosrcadventures9019 Před 3 lety +1

    Wow it went nuts I guess grass got wrapped up in it that was cool hope u get it back up bud..

    • @AndrejSturm
      @AndrejSturm  Před 3 lety +1

      Thanks man, I've just ordered a new canopy. The heli will be operational soon 👍

  • @orbitalgolem91
    @orbitalgolem91 Před rokem

    Wow - my M2 V2 with 370 flights had same uncontrolled piro. Like yours, no crashes until that point. Started piro'ing uncontrollably and hit throttle-hold into the ground but much lower altitude. Noticed that much of the tail blade was gone. After removing the blades, noticed that the tail motor's bearings were trashed - lots of vibrations. Vibes likely fractured the tail blade at one of the mounting screw points and that caused the other blade to shear off too, causing the uncontrolled piros. New tail motor was much quieter. Moral of the story - check the tail motor for vibes every 150-200 flights, otherwise, you run the risk of fracturing the tail blade eventually. In your case, maybe the MOSFETs in the ESC driving the tail motor are starting to fail.

  • @CRUZROYHelicopters
    @CRUZROYHelicopters Před 2 lety

    maybe grass got hung up in tail, causing a temporary switch in direction, and just a end it reverse, but to late

  • @muscleman369
    @muscleman369 Před rokem

    I want one now, that was a heli of an impact!

  • @reigaterobot4965
    @reigaterobot4965 Před 2 lety

    Looks to me that you got too close inverted to that grass and ingested some into the drive, the buzz you are hearing at the end is the tail motor out of sync with the main shaft - tbh its a miracle it didn't all just shatter into loads of parts

  • @westhobbiesrc8051
    @westhobbiesrc8051 Před 3 lety +1

    What happened is easy. You hit the tail in the grass which stopped the tail motor and the tail to go crazy and which is why It stated spinning like a top and the ESC reset just before it crashed which is why you got the tail back.

    • @AndrejSturm
      @AndrejSturm  Před 3 lety +2

      Interesting, thanks. I thought that the FBL got confused ... the ESC didn't come in to my mind. It seems that the heli could be recovered if I had not hit the throttle cut just after the ESC reset happened.

    • @westhobbiesrc8051
      @westhobbiesrc8051 Před 3 lety +1

      @@AndrejSturm I personally had it happen before if you smack the tail the ESC will shut the tail motor off. It is designed to stop any further damage, you can hear in the video detail motor shut down after it was hit and then right before you hit throttle cut you can hear it come right back in the helicopter stabilize out.

    • @AndrejSturm
      @AndrejSturm  Před 3 lety +1

      Wow, that's brilliant. The ESC shuts down when the motor gets stuck to prevent even more damage from happening 👍
      Thank you for a great explanation man!

    • @westhobbiesrc8051
      @westhobbiesrc8051 Před 3 lety

      @@AndrejSturm you’re welcome man! Glad I can help. Great flying!

  • @jimiharper6996
    @jimiharper6996 Před 2 lety

    Explanation: It better off not being used for a lawn mower lol (JK) Nice crash tho bro. You almost saved it

  • @cocholate
    @cocholate Před 3 lety

    after 400 flights is upgraded to the expert mode, then you have to flight without tail :) amazing video and good reaction

  • @Acemechanicalservices

    That’s as plain as day, what happened. You wound up that grass into the tail motor, and that’s how helicopters fly with no tail rotor to offset the torque.

  • @mickmuzzmkmz1628
    @mickmuzzmkmz1628 Před rokem

    Grass in tail rotor is my guess.

  • @sneakerhead5065
    @sneakerhead5065 Před 3 lety +1

    Omg 😂but nice video 👍🏼

  • @mostlydollshelicopters4799

    Awesome video though 🚁

  • @datvik7187
    @datvik7187 Před 3 lety +1

    That was epic 🤙😂

  • @RobisonRacing68
    @RobisonRacing68 Před 3 lety

    LOL!!!! That looked more like those pinwheel fireworks! All you damaged was the canopy?? That says something about direct drive being the way to go. My guess is by hitting the grass with the tail rotor you set off a flight controller anomaly that it was never going to catch up to with so much sensor overload. Kind of like me when I can't get my hair done right on a bad hair day. Hahaha!

    • @AndrejSturm
      @AndrejSturm  Před 3 lety +1

      I will inspect the heli tomorrow as I am running out of time today. But yeah, it seems that only the canopy and one servo arm got damaged which is really amazing! I think that you are right, the FBL unit has been confused and wasn't able to recover - when the heli was spinning I switched from manual mode to stabilized mode but that didn't help ... but as you can see in the video at the end the FBL unit was able to recover the tail from insane spinning but then I already decided to hit the throttle cut switch and it was too late. The heli crashed in self stabilisation mode - that helped reducing the damage ... I am suprised how the FC got so confused with such a minor bad stimulus.

    • @scottwalker6257
      @scottwalker6257 Před 3 lety

      @@AndrejSturm hi mate. Have had this happen many times.. generally when have bumped the landing skids on the ground or the tail has come into contact with something. As you say the control unit gets confused and Heli just starts spinning. Recovered a couple but generally it's game over ☠️

    • @AndrejSturm
      @AndrejSturm  Před 3 lety +1

      Hi Scott, to me the explanation that the youtuber WesthobbiesRC posted makes the most sense now. He said that the ESC for the tail motor shuts down by desing to prevent more damage to happen when the tail rotor gets stuck. Thats a brilliant ingeneering to me, if that's true.

    • @scottwalker6257
      @scottwalker6257 Před 3 lety

      @@AndrejSturm Maybe that's whats going on then.. i do know it can happen if you bump on the ground too hard too with the skids... Maybe the impact shuts down the tail too.

  • @johaze007
    @johaze007 Před 2 lety

    I can't believe that it wasn't destroyed.

  • @cruxio02
    @cruxio02 Před 3 lety

    FARK!

  • @christopherbrown6152
    @christopherbrown6152 Před 2 lety

    Id bet you got grass wrapped up in the rotor(s)

  • @1976gerbel
    @1976gerbel Před 2 lety

    Maybe you should not have flown over the grass 😂. Very stupid idea 😉

  • @ModellbautechnikSalzkammergut

    👍👍👍

  • @andyMSH700
    @andyMSH700 Před rokem

    what's everyone's obsession with grass......i find it weird everyone wants to use the heli as a lawnmower....... i am pretty sure some of the advanced 3D pilots are a bad influence as they scrape blades intentionally all the time...weird stuff and dangerous. ...nice heli and nice flying ability.

  • @iatomiksi2200
    @iatomiksi2200 Před 3 lety

    I just question how the tail stopped dead still just before crashing

    • @AndrejSturm
      @AndrejSturm  Před 3 lety

      Just before crashing the ESC for the tail motor reinitialized and start working again.

  • @emsman59
    @emsman59 Před 3 lety

    Grass wrapped around tail motor shaft...I think?

    • @AndrejSturm
      @AndrejSturm  Před 3 lety

      Hi, please look at the two comments that WesthobbiesRC posted as an explanation.

  • @emsochetra671
    @emsochetra671 Před 3 lety

    It’s look like tails rotor blade error...after you hit the grass.

    • @AndrejSturm
      @AndrejSturm  Před 3 lety

      Yes, looks like the ESC for the tail motor got an issue after that hit.

  • @unstoppable6047
    @unstoppable6047 Před 3 lety

    Yes that was a great crash. GRASS

  • @cruxio02
    @cruxio02 Před 3 lety

    loss of tail authority ?

    • @AndrejSturm
      @AndrejSturm  Před 3 lety +1

      When I hit the grass with the tail rotor, the FBL unit got confused ... and it put the wrong signal to the tail rotor ESC ...

  • @kevenstocks5244
    @kevenstocks5244 Před 3 lety

    should of hit throttle hold straight away !!!

  • @KC-CHIEFS-1
    @KC-CHIEFS-1 Před 10 měsíci

    Šta bi Slovenija

  • @jordandotan
    @jordandotan Před 3 lety

    Just happened to me today flying over grass ( short grass though)
    Actually, happened 3 times.
    2 times I saved the heli,
    The 3rd time went BOOM.
    Here's a link to the FB thread about my case
    m.facebook.com/groups/omphelis/permalink/851110125794382/