Yamaha Raptor WON’T start… Lets see why!
Vložit
- čas přidán 29. 03. 2024
- This Yamaha Raptor almost wants to start but not quite… let’s dig in and see what the issue is.
If you like the content please support the channel by liking and commenting on the videos. Thanks!
Milwaukee screw Driver set
amzn.to/4cwk7zr
Milwaukee M18 3/8" impact i use all the time.
amzn.to/4bXTSBw
Milwaukee 1/2" impact for getting the stubborn bolts out.
amzn.to/3IvcF9X
Tripod used for filming
amzn.to/49HAS90
Battery Jump Pack i use.
amzn.to/3tQOvTm
Disclaimer: Some of these links are affiliate links where I'll earn a small commission if you make a purchase at no additional cost to you.
For business inquires please email Rock Ovitt
R.ovitt@outlook.com
#yamaharaptor
#atvrepair
#rockspowersports - Auta a dopravní prostředky
Look at you using two hands! I'm always wondering how much faster you'd get through these jobs if you weren't providing all the awesome content for us.
It would be much quicker without the videos for sure..
Another great job Rock ! ☃️👍👍
Thanks for sharing your experience.
I have a 07 Raptor 50 for my daughter and ran into the same issues. Bought it after it was sitting for years and the jets are so small that I couldnt clean them so bought new. They were clogged. Fuel line cracked when trying to take the carb off. Also the 90 degree intake that bolts to the motor. The O-ring that is on the motor side was cracked so replaced that. After all of this I finally got it to run pretty decent. Love the videos
Glad you got it running good for your daughter! The pilot jets are extremely small on these little engine and the 50 is even smaller!
Really enjoy the videos man. 😄
Look at that nice second gen at the end lol
Truly enjoy these videos. They are entertaining for sure. Any one noticed the gas can is the same color as the atv lol
Should always test ride stuff before giving back. Love the content keep it up.
Great video Rock! Glad you took the kids 80 for a speed run haha. 1mph slower than the pw50 😂
Right, it was a little slower but has a little more oomph to it!
Arkansas Wavin
I have found that you can't go wrong with anything Milwaukee. Love the tools and power tools.
Absolutely!
looks like the same engine on my sons 1995 yamaha 80 badger still!!another great vid rock!!!ps..i had the same problem and yes 1 valve was tight!!!
Nice work Rock ! Just performed this surgery on my 10yr old nephews 06 Raptor 90 a cpl wks ago . Aside from having to descale the inside of the metal fuel tank , machine goes well ! Wish'd Yamaha would have used a plastic Tank ! Took about 1\2 gal of old fuel out & about 1\2 cup or more of rust ....was NASTY ! Surprised the tank came out as well as iot did , installed new filter obviously & sent home w another to change later . The carb & petcock had a nice bath in the Ultrasonic ...lol
These are the best engines to work on very easy . None of that new electrical computer bull crap an nonsense. Just a good old engine with tappet adjustable valves and a carb and a lil ignition system that’s basic
I got a 1990 yamaha champ 100 it use to run like a dream! Starting to be abit of a hard starter. I went through the carb and installed new orings so i had no air leaks! Think its time to check the valves!
Might be a good idea to check them.
Good content man I thought of you today when I went through your neck of the woods headed to jay peak resorts saw a sign that said island pond Vermont
Thanks! Headed skiing were you?
@@rockspowersports nah man just the indoor waterpark for the kids hope
You and your family
Has a good Easter !!
Love the videos and really enjoy the working on stuff videos!!
Do you have any kfx700 parted out fourwheelers in your graveyard?
Thanks, I’m glad you enjoy them! I d not have a kfx700 right now, I had one a while back but someone but the entire parts machine from me.
I have an 06 raptor and have been struggling. Just got a new carb and it’s running all good but Boggs out when u give it full gas but if you ease into the gas it’s fine but still seems to lacking. I feel it’s gs or air
Howdy duty from indiana
Was wondering if you would answer some questions that I had about an atv
When you were putting the carb back together I noticed you screwed the fuel/air screw all the way in, arnt you supposed to back it up some?🤔
Can we get more videos about and working on 90s polaris wheelers I own two of em and could some good knowledge and good examples of what they should be and how to work on them properly
I’ll be working on some soon. What size are yours? Are they 2 stroke or 4 stroke?
@rockspowersports 4 strokes thank you so much for taking the time to consider my comment
When you installed the jets did you count the turns? Or do you just tighten them? Never touched the jets in my daughter’s 90. Thanks
The plot jet and main jet just get screwed in all the way. The air fuel mixture screw is the one you need to count the turns on.
Braap
You need to get yourself some gear wrenches!
Probably a dirty carb