This guy gave me confidence to straighten my PC pins i didn't use any magnifying glass. I did it using a needle now my PC working again properly, but you need very patient hand otherwise pins 📍 can be broken.
You installed the memory boards in B1 and B2 that configuration does not provide for dual channel memory. Insert one memory card in A2 and the other in B2 and see whether motherboard boots and BIOS shows dual channel memory.
Hi, I used a Andonstar AD407 HDMI Digital-Mikroskop for recording the the Macro shots and recorded directly to an SD-Card. But connecting an HDMI-Grabber directly to the HDMI-Outout would be an option too.
If you had bent pins and fixed it, but one of your RAM channels still isn't working, you might still have pins, that do not contact properly. Check them again and perhaps try to clean the pins or your CPU. A little bit of skin oil could be ruining the contact. And one missing signal can can take a whole RAM channel down.
![[LGA1151] ¡Reemplazo exitoso del zócalo de la CPU! reemplazo de socket de cpu [junk PC]](/img/n.gif)
This guy gave me confidence to straighten my PC pins i didn't use any magnifying glass. I did it using a needle now my PC working again properly, but you need very patient hand otherwise pins 📍 can be broken.
I am very glad to her, that you could fix your own mainboard. Thumbs up!
Great job! I noticed a small thing at 11:21, but it didn’t affect the outcome.
My butt puckered every time you bent a pin
Very nice Video! thoroughly enjoyed it!
Thank you very much! :)
Very cool video. I love your microscope
You installed the memory boards in B1 and B2 that configuration does not provide for dual channel memory. Insert one memory card in A2 and the other in B2 and see whether motherboard boots and BIOS shows dual channel memory.
"It's crying" 🤣
I did this after watching it, but tye reflection is different than others but the pin tip or top is looking same as all,
6:54 - The pins on the inner part are all the same in that area: "vcccore".
They seem to be not that relevant.
Thats true, but if I can fix them i will try 😀
And btw. there is now a i7-13700k calculating on that mainboard and it needs a lot of vcccore 😉
What magnifying lens you used?
Hi, I used a Andonstar AD407 HDMI Digital-Mikroskop for recording the the Macro shots and recorded directly to an SD-Card. But connecting an HDMI-Grabber directly to the HDMI-Outout would be an option too.
Hi Friends i have the same problem bit i have repaire all Bent pin . But my ram Works now allways on 2 slot of 4 ..... An Idea ?
If you had bent pins and fixed it, but one of your RAM channels still isn't working, you might still have pins, that do not contact properly. Check them again and perhaps try to clean the pins or your CPU. A little bit of skin oil could be ruining the contact. And one missing signal can can take a whole RAM channel down.
@@cookingcomponents7858 tkx
Is derange a good thing in your language??? In English deranged means angry/unthinking haha!!
@@tristancole8158 chn
What?, does the socket even replace? (Mine Asus prime, LGA1700)
What tweezers did yo use?
I am using the set BES5-050 from Bernstein, but there are much cheaper and still good tweezer sets.
can i use my phone camera and tweezers?
I don't know if it will work, but you could try it.