Hammer Restoration [Very Rusty Restoration] - Awesome Restorations Remake
Vložit
- čas přidán 9. 09. 2024
- Very Rusty Hammer Restoration [Very Rusty Restoration] - Awesome Restorations Remake - Etching Metal
This restoration is not a normal one, because I am restoring a very rusty hammer, just like "Awesome Restorations" did. But I do not do this with laser, hardening furnace or other high-tech, but with very simple methods that almost every hobbyist has at home. For example, I etching metal, but as mentioned with very simple means.
I had a lot of fun filming this restoration video, because I learned and applied new techniques, and in video editing I tried new things to get very close to the video of Awesome Restorations. By the way, I am a very big fan of Martin's videos, so I send him my best regards!
▬ What did I do ?! ▬▬▬▬▬▬▬▬
This hammer is really rusty! Therefore, in the first step I blast this with slag. Then I grind the hammer faces and the sides with different types of sandpaper. With a propane burner I heat the old rusty hammer to about 800°C (Tip: Since salt melts at 800°C, just sprinkle it on top) and the oil to about 80°C. After hardening, including burnishing, I prepare the large surfaces on the sides. From adhesive foil I cut my desired pattern and now etch the surface of the old hammer, the result is amazing - and that with household products. Installing the handle is just a piece of cake. But take a look for yourself! The result is "Awesome"!
▬ Good to know ▬▬▬▬▬▬▬▬
I used the following tools: blasting cabin, blasting medium: slag, hammer, center punch, drill, cordless screwdriver, tap, drilling oil, eyebolts, threaded rods, pin punch, soft-face hammer, sandpaper, angle grinder, sandpaper grinding wheel, Bunsen burner, propane gas, wire, adhesive foil, scalpel, paper tape, salt, water, cotton swabs, crocodile clips, 9V battery, saws
This channel is all about the how to restore or make a new one things I do and how I do it . Mainly you will see here restoration videos because CONVERTING OLD RUSTY THINGS TO NEW THINGS ARE SO SATISFYING and I will also do some customization project which I hope you like it in how to restore channel videos
I'm still learning how to work with CZcams so please help me out by subscribing and if you like my content tell me what you think in the comments section.
like and Subscribe for more and stay tuned.
Thanks for all your support, we really do appreciate it :-)
/ @howtorestore
Sig Sauer M17 Colt Restoration- Toy Gun Restoration video
• Sig Sauer M17 Colt Res...
GUN Lighter Restoration -357 Magnum Restoration
• GUN Lighter Restorati...
Restoration Rusty old Hand Drill
• Restoration Rusty old ...
Restoration of rusted and fully jammed pliers
• Rusted and Fully Jamme...
Hammer Restoration [Heavily Rusted Restoration]
• Hammer Restoration [Ve...
at 9:45 this is what the entire video is about... NOT throwing it away, but reusing it for another lifetime. thank you very much for this video!
thank you so much for your comment and It really means a lot to me that you take the time to share your thoughts.🙏👍🔥
thank you so much for your comment . it means a lot🙏👍👏
C'est un marteau destiné à ferrer les lapins ?? (c'est une blague!) Petit marteau sympa bien restauré !!
merci beaucoup baribal
This work is technically perfect and somebody can teach it what operations to perform.
But now calculate how much electricity, working time, welding gas you spent on a piece that probably isn't important even because of its age.
You really "nailed" this restoration👍🔨!!
Just stop, it’s making me Brocken *turns into baddie emo*
Thank you very much!😍🙏
@@howtorestore, you're welcome 🙏🏿!
Super!!!
ficou perfeito
Yes 10/10
Wow...congratulation
thank you so much for your comment and It really means a lot to me that you take the time to share your thoughts.🙏👍🔥
I'm amazed at how you where able to restore that hammer!!!! A+++++!
thank you so much for your comment . it means a lot🙏👍👏
شكراً لك على هاذا العمل الجيد
شكرا جزيلا لتعليقك. فهذا يعني الكثير
Круто👍🔥 Ставим ЛАЙКИ😋
thank you for comment
It said Cool👍🏼🔥Put Like😋
thank you so much for your comment . it means a lot🙏👍👏
عالی بود
منتظر کارای جدیدم👍👍
kheyli mamnon🙏
ما اسم هذه الماكنة؟ 2:17 وما فائدتها؟
10/10 well done sir
thank you so much for your comment . it means a lot🙏👍👏
Nice job 👍 that turned out really great.
thank you so much for your comment . it means a lot🙏👍👏
You are a good craftsman and you did a nice job.
Of course it is for VIDEO purposes only.
Otherwise it's wasted materials and wasted time.
Very nice save for this tack hammer. I think the brazing for contrast was a bit useless, but the final result was nice...
Thank you! Cheers!
Unreal well done man looks amazing 👏
Glad you like it🙏
У меня после замены кровли полведра кривых гвоздей. Надо выправить, обточить, заострить, прокалить и отполировать.
I would have cleaned the handle hole before welding....
Que laburo man… 👏🏽👏🏽👏🏽
thank you so much for your comment and It really means a lot to me that you take the time to share your thoughts.🙏👍🔥
I liked it. A show off was there
thank you so much for your comment . it means a lot🙏👍👏
Literal garbage made indistinguishable from brand new... Nicely done, sir. 👏👏👏
thank you so much for your comment . it means a lot🙏👍👏
Зачем наплавил на молоток латунь?
excellent job congratulations friend greetings from Navojoa Sonora Mexico
Thank you very much!🙏👍
Well done!
thank you so much for your comment . it means a lot🙏👍👏
What monster of a human is capible of breaking a drop forged hammer in half! :O
the reason for breakage is because it is cast iron .thank you so much for your comment and It really means a lot to me that you take the time to share your thoughts.🙏👍🔥
Well done. It was fun to watch.
thank you so much for your comment . it means a lot🙏👍👏
You are so creative 👍👌👏
Thank you so much 😀
Nice work.
Thank you! Cheers!🙏🙏😍
Жалко что у молотка не было ручки. Мастер не знал как она выглядит и сделал ручку как у лопаты.
Почему внутри не сделали сварку
❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
thank you so much for your comment and It really means a lot to me that you take the time to share your thoughts.🙏👍🔥
impressive, but you never showed us the surfaces up close after welding and polishing. why?
actually I don't like the final result .the hammer was cast iron And I couldn't smooth its surface completely
Buen trabajo pero no vale la pena el tiempo invertido
thank you so much for your comment and It really means a lot to me that you take the time to share your thoughts.🙏👍🔥
Looks great!!
Enjoyed your video and I gave it a Thumbs Up
Thanks so much🙏
@@howtorestore You're very welcome!!
Soldar es martillo roto cuesta más que comprar uno nuevo para que tanto esfuerzo
Why?
should have shown more of the inlays
thank you so much for your comment and It really means a lot to me that you take the time to share your thoughts.🙏👍🔥
😃😃💪💪👍👍👍👍👍👏👏👏👏👏🙋🙋
Хорошо что конечно, но, это как по мне совершенно бессмысленно.
thank you so much for your comment . it means a lot
Hello. The materials used cost twice the price of a new hammer of the same size and specifications, unfortunately a waste of time and effort.

The next one put it in vinegar... three days...
Why? It's slower, and more damaging to the base metal than what he did....
thank you so much for your comment . it means a lot🙏👍👏
thank you so much for your comment . it means a lot🙏👍👏
A job pointless. The hammer can be purchased for $ 1.
Where?
thank you so much for your comment . it means a lot🙏👍👏
@@autumn5592 In Poland -:)))
thank you so much for your comment . it means a lot🙏👍👏
не качественно
Well done. 👍
Thank you! Cheers!🙏😍