The ES4 was my first legit EDC tool besides a swiss army knife. Mine broke in 2023 and they sent me a last replacement. I sold it and bought a used one theyre worth so much now.
Carried one for a few years, was a good tool. Now I just carry a full sized tool instead. st300 for work and charge ti for goin’ out lol leatherman should just change the pivots to screw pivots so they can just change your broken part instead of giving you a whole new one.
All the Squirt series are very good unfortunately Leatherman chose to discontinue them instead of the sh*tty Micra. Also unfortunately so are the Juice series they are all discontinued instead of the sh*tty Micra.
@@usernameisusername i know I heard about from others too, it was mentioned somewhere in the Internet that the pre-2000s Micra are still manufactured in good quality, those in ancient red/yellow or blue/yellow cardboard boxes… not the recent ones in Yellow/Black boxes.
I need you to stop making such good content, thanks to you , i have collected all 9 mini leatherman tools, and my leatherman collection is costing me thousands of dollars 😅
@@hvacbudget8600 lol so far it has costed me close to $10'000 already and I don't even have any of the garage series yet, or any of those Fancy Charges, My Most Rare Piece I Have Is The Vista So Far, I Really Want A Garage Piece
I made a leather pouch for my ps4, did carry it everyday and never used it because my go to is my vic classic (or my mini flagship if it´s on top in the pocket). But nowerdays I have a mini champ and a aliexpress prytool on my carkeys and the rescue scissors of aliexpress (I put a good dollup of hotglue over the glassbreaker to make it pocketfriendly) which mimic the Raptor scissors (those scissors cut through all they should cut and alot of the things they shouldn´t) so I´m set for most tasks...
I was a control & fire alarm electrician, I used the Radio Shack wire stripper’s a lot. They are very pocketable, add a control screwdriver and you had a pretty good kit. I don’t know if you are aware Victorinox made two special SAK’s for Radio Shack that are very desirable on the secondary market. They also came in handy in my work. one was a two layer with there pliers and a blade. They also made a special 84mm electrician’s knife, also just two layer. I believe they stopped selling the Squirt because the plier jaws were breaking and they had too many returns. It would suck to buy a Squirt on the secondary market only to have them break. especially if you paid a premium price.
That's a decent option, but it's bigger. I have the squirt and it fits perfectly in my wallet pouch along with a few other EDC essentials. I am going to be so sad when my squirt bites the bullet.
@@usernameisusername that's why I carry the Victorinox SAK Manager on my keys, & you can get some 3D printed scales for it so you can hold both the tweezers and the toothpick on one side
That's not good. I have heard files are more brittle and so they can't handle too much stress. Not sure that's a good enough excuse for it not opening a paint can though.
@@hvacbudget8600I guess they need a good level of hardness that would make it brittle, I’ll try to remember that next time I think of using a file as pry bar.
I'm just over Leatherman. You can get something just as good or nearly as good for a LOT less money. Why waste the $$ on the name, especially in these high inflationary times. You can eat or wear a Leatherman.
If one serie was to be ressucited it should be the JUICE !!!! Period
Yes bring it back
The es4 was perfection....they are idiots for not making one.
No doubt the best keychain tool, I keep the last one I have tucked away since loosing it or breaking it would be so expensive.
The ES4 was my first legit EDC tool besides a swiss army knife. Mine broke in 2023 and they sent me a last replacement. I sold it and bought a used one theyre worth so much now.
Carried one for a few years, was a good tool. Now I just carry a full sized tool instead. st300 for work and charge ti for goin’ out lol leatherman should just change the pivots to screw pivots so they can just change your broken part instead of giving you a whole new one.
All the Squirt series are very good unfortunately Leatherman chose to discontinue them instead of the sh*tty Micra.
Also unfortunately so are the Juice series they are all discontinued instead of the sh*tty Micra.
Sensing you dont like your micra. 😂
@@usernameisusername yea it’s overpriced and low quality.
@@vJaxz it's way overpriced now but it was reasonable back in the day. Mine has held up for 10 years. Light use only though 🤷♂️
@@usernameisusername i know I heard about from others too, it was mentioned somewhere in the Internet that the pre-2000s Micra are still manufactured in good quality, those in ancient red/yellow or blue/yellow cardboard boxes… not the recent ones in Yellow/Black boxes.
I believe that if send in a squirt to leatherman for repairs, they will replace it with a mirca.
Probably so. I better hang onto my squirt.
I need you to stop making such good content, thanks to you , i have collected all 9 mini leatherman tools, and my leatherman collection is costing me thousands of dollars 😅
LoL! It can get pricy.
@@hvacbudget8600 lol so far it has costed me close to $10'000 already and I don't even have any of the garage series yet, or any of those Fancy Charges, My Most Rare Piece I Have Is The Vista So Far, I Really Want A Garage Piece
I'm in the same boat. He's costing me a fortune.
I made a leather pouch for my ps4, did carry it everyday and never used it because my go to is my vic classic (or my mini flagship if it´s on top in the pocket). But nowerdays I have a mini champ and a aliexpress prytool on my carkeys and the rescue scissors of aliexpress (I put a good dollup of hotglue over the glassbreaker to make it pocketfriendly) which mimic the Raptor scissors (those scissors cut through all they should cut and alot of the things they shouldn´t) so I´m set for most tasks...
That leather pouch sounds cool.
I have a PS4, but was able to get a used ES4 off eBay just now for $80. Glad I was able to get one for under $100. Great video!
Good job!
I was a control & fire alarm electrician, I used the Radio Shack
wire stripper’s a lot. They are very pocketable, add a control screwdriver
and you had a pretty good kit. I don’t know if you are aware Victorinox
made two special SAK’s for Radio Shack that are very desirable on the
secondary market. They also came in handy in my work. one was a two
layer with there pliers and a blade. They also made a special 84mm
electrician’s knife, also just two layer. I believe they stopped selling the
Squirt because the plier jaws were breaking and they had too many returns.
It would suck to buy a Squirt on the secondary market only to have them break.
especially if you paid a premium price.
Very cool about the SAK's.
ES4 radioshack. Def.
I got one only recently from ali express
Nextool Mini Sailor.
I like my mini sailor. Great fir the price
That's a decent option, but it's bigger. I have the squirt and it fits perfectly in my wallet pouch along with a few other EDC essentials. I am going to be so sad when my squirt bites the bullet.
Wish it had tweezers though
@@usernameisusername that's why I carry the Victorinox SAK Manager on my keys, & you can get some 3D printed scales for it so you can hold both the tweezers and the toothpick on one side
@@linuxpenguin823 it's the ONLY real alternative to the squirt ps4 and it's high quality made, it's not too much bigger any way
I have a squirt and couldn’t care less if they bring it back. It’s way too expensive and I prefer the scissors on my flagship mini.
The radioshack tool is actually just squirt e4, not es4.
Good to know! I like it better!
SOG PowerPint all the way!
Do you mean SOG PowerPint?
The file on mine broke when i tryed to open a paint can
Squirt P4
That's not good. I have heard files are more brittle and so they can't handle too much stress. Not sure that's a good enough excuse for it not opening a paint can though.
@@hvacbudget8600I guess they need a good level of hardness that would make it brittle, I’ll try to remember that next time I think of using a file as pry bar.
A version where the scissors are replaced by some more durable implement would be awesome and they won’t worry about warranties so much.
Definitely!!
If they bring it back, make a TSA compliant version without the knife blade.
Don't pay a lot of money for a used Squirt. Get a cheaper different brand or just use a couple specific tools versus a multitool.
I'm just over Leatherman. You can get something just as good or nearly as good for a LOT less money. Why waste the $$ on the name, especially in these high inflationary times. You can eat or wear a Leatherman.
As an Electronics Tech, a Radio Shack Leatherman ES4 would be the perfect keychain tool for me 👍
I'll struggle thru with my Dime though 🫤
I can also see it useful for control panels, the screwdriver probably fits well on DIN rail terminal blocks.