How to change the rack and pinion on a 2007 lexus rx 350

Sdílet
Vložit
  • čas přidán 13. 09. 2024
  • On this video I show you the basic way of how to remove a rack and pinion in a 2007bnb Lexus rx350 thanks for watching
    i am not liable for anything that happens or occurs while you are working on your vehicle, this video is only for a educational tool, and you may need more information to properly do the work. I am not liable for any injuries or death due to your work on your done at your own risk
    check out th facebook
    / fixergood351w

Komentáře • 38

  • @christophershaffer1595
    @christophershaffer1595 Před 4 lety +16

    After changing the rack and pinion the VSC light will come on after driving down the road about half a mile. To reset pull the negative off the battery terminal for a few minutes. However, after doing so passenger window control from the driver's seat will also need to be reset. To reset go to each passenger window and work the windows a few times fully opening and closing. Control should be regained from drivers side window control. Hope this helps someone.

  • @nolajmoney5042
    @nolajmoney5042 Před 9 měsíci

    Ur the first person i seen do a step by step i love it

  • @rajdhaliwal7320
    @rajdhaliwal7320 Před rokem

    Thank you sir very helpful and well explained

  • @jaypalafox1183
    @jaypalafox1183 Před 2 lety +2

    If off centered and wasn’t aligned right with the steering wheel, does the alignment shop adjust and corrects this or they only adjust the toe and camber?

    • @fixergood
      @fixergood  Před 2 lety

      depending on how bad your steering wheel is off , if your off a quarter tuen or less if you ask them to center the wheel they can, if it's upside down there's not much you can do , except take it off and try and line it up . thanks for watchin

  • @keithbailie3014
    @keithbailie3014 Před 5 lety +5

    What's the difficulty level of this repair would you say? If you're someone who's only say changed rotors & pads on their RX350, is this levels above that or what would you say? I know mechanic says the book on this is something like 15hrs but he says his tech thinks he can do it in 8hrs. Just wondering if I'd be CRAZY to attempt this.

    • @fixergood
      @fixergood  Před 5 lety +2

      I would not recomend it there are some tricky things with lining up the rack properly so that you dont damage the rack and that it turns and steers properlly. Also so that the steering wheel is properlly aligned. Thanks for watching besure t like and subscribe to get all my latest tips and tricks

  • @SteveP116
    @SteveP116 Před 10 měsíci

    How about the ls350 rack replacement? About the same

  • @Blueskies-h3e
    @Blueskies-h3e Před 5 měsíci

    When can you do mine???

  • @user-mv3xs3ie4m
    @user-mv3xs3ie4m Před rokem

    Which line goes on the top the one that's on the left hand side or the one that's on the right hand side

  • @philipjones7920
    @philipjones7920 Před 4 lety +3

    Hey I’m having trouble reinstalling the steering knuckle to the rack any suggestions?

    • @fixergood
      @fixergood  Před 4 lety +2

      Inspect your knuckle and look for a wide spline mark and make sure they are both lined up on both sides

  • @ayderetana7774
    @ayderetana7774 Před rokem

    Very helpful

  • @jimmyflint6153
    @jimmyflint6153 Před 2 lety

    You didn’t have any issues from the steering angle sensor? Before the alignment?

  • @chirish09
    @chirish09 Před 4 lety +1

    helpful Thanks. Very hard to hear you though

    • @fixergood
      @fixergood  Před 4 lety +1

      Thanks for watchin I'm getting better at the sound with mics and cams. Besure to like and subscribe for more tips and tricks.

  • @philipjones7920
    @philipjones7920 Před 4 lety +2

    Thanks handsome ❤️

  • @jayvelez5334
    @jayvelez5334 Před 4 lety +1

    Hi, I need to replace the rack on my 2008 Lexus 350 ES, is the same as RX?

  • @thomasfoster7524
    @thomasfoster7524 Před 4 lety +1

    I cant fet the bolts to take fhe rack off t

  • @meganviolotte6207
    @meganviolotte6207 Před 5 lety +2

    How much does something like this usually cost? I just bought an 05 RX 330 and noticed there's a leak on the rack on the right side. Thank you.

    • @fixergood
      @fixergood  Před 5 lety +1

      Thanks for watching my video it was around 600 for the rack and pinion . I hope this was help full and besure to like and subscribe to get all my latest tips and tricks thanks again.

    • @meganviolotte6207
      @meganviolotte6207 Před 5 lety +1

      @@fixergood Oh wow! That's a bit of a relief, checked online and saw people saying around $1,200 & $1,500. I liked and subscribed! :)

    • @EASTSiDAzLkBC
      @EASTSiDAzLkBC Před 4 lety +2

      600 is probably with labor. I got mine new 210 online

    • @fixergood
      @fixergood  Před 4 lety +1

      Thanks for watchin

    • @chunkeymathew2884
      @chunkeymathew2884 Před 3 lety

      Just need to replace the oil seal, no need to change the whole rack.

  • @mrRnDe
    @mrRnDe Před 3 lety

    Would this procedure also apply to a 2004 Highlander?

  • @MrBrownchicken
    @MrBrownchicken Před 3 lety +2

    lots of steps were not shown here. watch more videos before you start the job yourself

    • @fixergood
      @fixergood  Před 3 lety

      What do you feel was left out

  • @ameenahhightower2446
    @ameenahhightower2446 Před 3 lety

    9

  • @rolandroland1485
    @rolandroland1485 Před 2 lety +1

    My mechanic is charging me 1350$ parts and labor for this 😭😭, which seems a lot man !!! And the steering pump as well for another 1200$ 🤦🏿‍♂️🤦🏿‍♂️
    Does it seems overpriced to you ?

    • @fixergood
      @fixergood  Před 2 lety +1

      it seems about right it just depends on the shops labor rate, thanks for watchin really appreciate it

  • @joshuamason6641
    @joshuamason6641 Před rokem

    Mines is electric