I need a machine like that. I have to force feed mine after about an hour on a sharp blade, and in material like that, I'd spend more time unclogging the discharge chute than actually getting anything accomplished. Great equipment makes a monumental difference on the job.
That is a particularly efficient chipper, there is something deeply satisfying chipping, haven’t done it for years, the video brought back memories of times passed.
This is a Jansen GTS 1500e machine which this guy has improved a little with slightly larger engine (a Twin cylinder 24hp petrol loncin as opposed to the standard single cylinder petrol 15hp Loncin) Top fuel tank and a modification to the chute.I think Jansen need to take a leaf out of his book as he has made it better than it was .I mean the little machine is very good anyway as standard as I have one but definitely improved here .Well done mroki26
Oh my, I need a. Beast like that! It sure fasten things up when I have to chip the remains after knotting 40 willows. Now I have a chipper with a 6.5 hp briggs and Stratton engine, but when the blades are sharp it eats 8 cm of wood if its necessary. Not bad!
He put a 24 hp v twin on it. They come with a 15hp single cylinder motor. It does OK in stock form. But if you get to its max diameter capacity with harder wood it isn't so great. But. With a 24hp vtwin, well it does what he is doing in the video
i have a similar machine in australia , there are a couple of vids on my chanel , of ours smashing aussie hardwood . great machines for the price , and tight access . ive been very happy with mine
I like the way ! , This Guy ! Just Throws ! The Branch ! In ! To Say , l have ! Had ! Enough !! Of looking at you Branches !! Time ! To be !! Chipped !! Up !!
Why do you use such a small chipper for your business? Was the choice financial or practical? Just curious as most tree surgeons use either a tow behind or a tracked chipper.
Matt Seymour - Jansen GTS 1500. With modified engine if I'm not mistaken. I believe this one is equipped with a Lifan engine. Quite amazing performance. PS: Reading trough some comments seems to be a Loncin twin 24HP. I stand corrected. ;-)
@@crpth1 lifan, loncin same ting....honda copies, ive got both makes of them on different bits of kit, theyre good n reliable, 1 on a hyd power pack, a stump grinder , wacker plate and the honda V is on a timberwolf 125 ive owned for 14 years...this little thing is chomping thro those leylandii no problem. who'd have thought a 2k machine could be this efficient ? it doesnt have infeed rollers i believe but its pulling the load in no problem....wonder whats the biggest stuff hes had thro it? dont like the lifting up high to feed it tho....a day doing that wears you out depending on the branch size.. the hopper could be lower maybe but they all seem to be like this on this style of machine....more cutting to get branches to feedable size, Timberwolf just folds the smaller crotches and drags them in, bigger stuff i cut a leg off. .this would be real handy at those properties with only a normal garden gate access thro to the back garden, save me dragging everything out to the roadside if chip could be left there....defo worth further investigation. great vid.
Mam podobny rebak cedrus i tez myśle o wymianie silnika na mocniejszy z 12 na 27 km. Silnik tej samej marki. Czy oprócz silnika dużo innych modyfikacji było?
This is a drum type chipper. It's a Jansen GTS-1500e that is modified. The original 15hp engine is exchanged for a Loncin LF690F 24hp engine. The hopper is enlarged. The counter knife is set to 0.5mm distance from the knives on the drum.
for a small chipper that things not hanging about , to be fair , neither is the guy whos feeding it any more details on the chipper , make , model and price.
can watch these machines allday and never get bored
I need a machine like that. I have to force feed mine after about an hour on a sharp blade, and in material like that, I'd spend more time unclogging the discharge chute than actually getting anything accomplished. Great equipment makes a monumental difference on the job.
These gravity chippers are amazing. I have the Jo Beau M500 on the Honda GX690. It's a beast of a machine for it's size.
That is a particularly efficient chipper, there is something deeply satisfying chipping, haven’t done it for years, the video brought back memories of times passed.
Loved the chipper it is so nice not to have all those tree limbs lying around.
Very impressive...... just what you need to clear the area quickly ... looks more efficient than some bigger models 👍🌲
😊😗😊😂🙂😗😇😘😇😗😗😇😗😗😗😄😗😗😄😗😄😗😗😄😗😗😇😗😗😇😗😇😗😇😇😗😇😗😗😇😇
Amazing piece of kit you have there. That trunk at 6:30 was a beast but ran through like butter! 👍👌
So satisfying to watch. Thank you
This is a Jansen GTS 1500e machine which this guy has improved a little with slightly larger engine (a Twin cylinder 24hp petrol loncin as opposed to the standard single cylinder petrol 15hp Loncin) Top fuel tank and a modification to the chute.I think Jansen need to take a leaf out of his book as he has made it better than it was .I mean the little machine is very good anyway as standard as I have one but definitely improved here .Well done mroki26
You can do it with any style drum chipper with this design
The 15hp engine was replaced with a 24hp engine? I wonder what that engine cost.
@@maverickgood5204 £670 delivered if your in the UK LIFAN LF690F with 1" shaft
Wow. That’s pretty good! I’m about to buy the newer version 2000 with Kohler engine. I hope that’s a good one too.
@@dave1455 please give me your contact I need the machine.Thanks
Fantastic machine 👍🏴
That machine’s got serious power!
great work,you know how to do your job..jimmy the saw
Very good job and machinery shredding of professional and video of quality on top, tank you very much.
czcams.com/video/W6kd2FF9x4g/video.html
Most satisfying video ever. That area would be having a soothing fragrance of the chopped cyprus leaves.... ♥️
He's a great worker!
This is so satisfying! 😍
Oh my, I need a. Beast like that! It sure fasten things up when I have to chip the remains after knotting 40 willows.
Now I have a chipper with a 6.5 hp briggs and Stratton engine, but when the blades are sharp it eats 8 cm of wood if its necessary. Not bad!
Nice done this machine is amazing
Good small chipper working well impressive performance
Small chipper can hold its own 😉
Wow !!! Me encanto esa máquina !! Send me One to mexico !!! Please !!!
Cool stuff 👍
Bloody good little chipper that is!
👍👌👏 Very impressive!
That is an impressive little machine
The chipper is pretty good also.
Nzsjdkxkckdkoosoeofie0ge9
Even though green soft wood, quite impressive. She did not bog down once. UK has some nice chippers for their size.
this is not UK😋
@@mroki26 Lucky you, Rep of Ireland. :)
Great chipper
The bigger ones are most expensive than a lot of cars new
James Chester some are worth nearly half a million
There's no reason they should be that expensive.
That machine works good
Looks like a mini whisper chipper.
I have to admit I started laughing when I saw this small chipper but it really surprised me!! Pretty amazing!!
Yes, it is small but it very powerful.
He put a 24 hp v twin on it. They come with a 15hp single cylinder motor. It does OK in stock form. But if you get to its max diameter capacity with harder wood it isn't so great. But. With a 24hp vtwin, well it does what he is doing in the video
Impressive work! We love what you did here! 👏👍🚮
i want one🤩
Wouldn't use one that much but after watching this I want one.😁
That's vary good
What a bad ass little chipper. I won't one.
Top Chipper 👍👍
You can tell them blades are razor sharp just by the sound.
Yeep. I always keep them razor sharp ;)
No way that is original motor... super cool!!!
Chlape ty ses,ale nadřel,jinak krásná práce!
i have a similar machine in australia , there are a couple of vids on my chanel , of ours smashing aussie hardwood . great machines for the price , and tight access . ive been very happy with mine
Yeah keep the blades sharp & clearances set right & they are great. So fast.
Wtf?
I would like one of these
Same planning on getting one when taxes come in!
Wow... !!! My best friend, It's always great. We liked and enjoyed to the end. Thanks
I could have watched this for hours. lol
- Å fan! 👍
What difference has this made to your work -- number of trips to the dump, cost of each trip? What's the cutting system. It's IMPRESSIVE.
This is a awesome job
Excelente
I wonder if there is a USA distributor somewhere?
เครื่องแรงดีจัง
👍👍👍
Ахуительная штука мне бы такую
I wish I had one of those machines.........................................
👍
Me when I am starving and see a bag of fries:
czcams.com/video/W6kd2FF9x4g/video.html
Really cute but strong chipper machine
What sort of chipper is this. What brand is it. Bloody awesome
Like 👍
I like the way ! , This Guy ! Just Throws ! The Branch ! In ! To Say , l have ! Had ! Enough !! Of looking at you Branches !! Time ! To be !! Chipped !! Up !!
Super 👍
How often do you sharpen the blades when working it this hard?
Did anybody else keep watching just to see the thicker branches go in the chipper
Meee
這部讚
強有力、吃樹支速度快
機體小方便出入
Why do you use such a small chipper for your business? Was the choice financial or practical? Just curious as most tree surgeons use either a tow behind or a tracked chipper.
cust me nothing to run and u can stick it any where+ it can produce 2.7 tone in an hour
twój młynek nadal działa?
👍😊😊😊👍
czcams.com/video/W6kd2FF9x4g/video.html
Awesome little devil
czcams.com/video/W6kd2FF9x4g/video.html
👏👍✋👍👍👍
That's a good little chipper and does really well for its size. Fast too! What is the brand ?
Matt Seymour - Jansen GTS 1500. With modified engine if I'm not mistaken. I believe this one is equipped with a Lifan engine. Quite amazing performance.
PS: Reading trough some comments seems to be a Loncin twin 24HP. I stand corrected. ;-)
@@crpth1 lifan, loncin same ting....honda copies, ive got both makes of them on different bits of kit, theyre good n reliable, 1 on a hyd power pack, a stump grinder , wacker plate and the honda V is on a timberwolf 125 ive owned for 14 years...this little thing is chomping thro those leylandii no problem. who'd have thought a 2k machine could be this efficient ? it doesnt have infeed rollers i believe but its pulling the load in no problem....wonder whats the biggest stuff hes had thro it? dont like the lifting up high to feed it tho....a day doing that wears you out depending on the branch size.. the hopper could be lower maybe but they all seem to be like this on this style of machine....more cutting to get branches to feedable size, Timberwolf just folds the smaller crotches and drags them in, bigger stuff i cut a leg off. .this would be real handy at those properties with only a normal garden gate access thro to the back garden, save me dragging everything out to the roadside if chip could be left there....defo worth further investigation.
great vid.
Give me the details
Price capacity and about the machine
😱😱😱😱👍👍👍👍👍
Mam podobny rebak cedrus i tez myśle o wymianie silnika na mocniejszy z 12 na 27 km. Silnik tej samej marki. Czy oprócz silnika dużo innych modyfikacji było?
Works great II
How long you had this machine. Is it disc or drum type
This is a drum type chipper. It's a Jansen GTS-1500e that is modified. The original 15hp engine is exchanged for a Loncin LF690F 24hp engine. The hopper is enlarged. The counter knife is set to 0.5mm distance from the knives on the drum.
👍👍👍🍀🍀🍀🍀💯🍀🍀🇪🇸
Keren 👍
czcams.com/video/W6kd2FF9x4g/video.html
💪👍👍
What do you do with the end product? Use it for Composting or Permaculture or throw it in the forest for natural composting.
Sometimes they use it for playground chips and mulch as well
Question what is the brand of the wood chipper and the size of horse power?
Hi dear
Exlent machine
So kind of you.. please let me know or send me a link from where you had parchesed it
czcams.com/video/W6kd2FF9x4g/video.html
for a small chipper that things not hanging about , to be fair , neither is the guy whos feeding it
any more details on the chipper , make , model and price.
5:42
凄いなぁ、俺の小さい頃実家に（田舎のど田舎）こんな機械が？？？有ったら、山の薪取りも（七町歩）ま、イイか。
Bet there was more than a credit card width between the knife and anvil.
What brand is that chipper?? Is it a bearcat?
Hi there this chipper Is jenson 15e it got 24hp engine on it class chipper hi ask the same questions thanks
Cześć możesz mi napisać gdzie dorabiają-robią noże do tego Rebaka
What model chipper is he using
Have you had to change the drum or anything other than the blades? I want to do the same to mine 14hp just isn't enough..
czcams.com/video/W6kd2FF9x4g/video.html
Hi I would love to modify one myself but can u give a list of the things u have modified on the chipper?
How do u transport it around
Trailer :)
Can this wood chipper be towed on the road?
What brand model was this wood chipper ?
How will this machine cope with an ash?
What is the horsepower for this machine?
24 hp
I need that machine 🤤
Who did the modifications?
🌳🤝👍👍А сколько лошадиных сил?
How many weeks does it take to fill up that truck?
One and a half hour
How many inches is the cutting diameter,please.
Aprox 4 inches
@@mroki26 My friend thanks soo much,from Buenos Aires City of ARGENTINE,Country.
Hey, what exactly brand and type is this chipper?
Jansen 1500e
Can u tell me rge cost off 2 now blades for yiur chipper
czcams.com/video/W6kd2FF9x4g/video.html
How much did it cost?
Hugo Tamayo 15000