Gearwrench 243 Pc Mechanics Set Can I be Honest here?
Vložit
- čas přidán 20. 08. 2024
- You Tell Me.... Amazon Affiliate Links below to the 243 Pc mechanics set and other Gearwrench Favorites
EZRED ANYWEAR Rechargeable Neck Light for Hands-Free Lighting:
amzn.to/3eReLzs
GEARWRENCH 3 Pc. 1/4", 3/8" & 1/2" Drive 90 Tooth Dual Material Locking Flex Head Ratchet Set - 81298T:
amzn.to/30yGr7o
243 Pc. 12 Pt. Mechanics Tool Set in 3 Drawer Storage Box - 80972:
amzn.to/39oS44H
GEARWRENCH 12 Pc. 1/4" Drive 6 Pt. Standard Universal Impact Socket Set, Metric - 84905:
amzn.to/2D09ybi
GearWrench 80564 7pc SAE Flex Socket Set & 80565 10pc Metric Flex Socket Set:
amzn.to/2E1fp0E
GEARWRENCH 18 Pc. 12 Pt. Combination Wrench Set, Long Pattern, SAE - 81917:
amzn.to/3htgKM3
GEARWRENCH 12 Pc. 12 Pt. XL Locking Flex Head Ratcheting Combination Wrench Set with Tool Roll, Metric - 85698R:
amzn.to/2ZMCtc6
GEARWRENCH 22 Pc. 12 Pt. Combination Wrench Set, Long Pattern, Metric - 81916:
amzn.to/2OMP5tq
GEARWRENCH 15 Pc. Ratcheting Serpentine Belt Tool Set - 3680D:
amzn.to/39m26DQ
GEARWRENCH 20 Pc. Phillips/Slotted/Torx Screwdriver Set, Dual Material Handles - 80066:
amzn.to/2CRLnfk
Justin - Thanks for the open and honest review! Glad you got it and enjoy it!🤜🤛⚙️🔧
Been Loving the kit so far. Your company has designed many tools of great quality for a fraction of what most mechanics will find themselves paying on the tool truck. I appreciate the Amazon deals you have and the fact that your company backs it's product no matter the source. You've got my business and support. I use all different types of tools from many manufactures and give my honest feedback. I appreciate the quality your company provides. Many thanks for your support. Cheers!
What retail stores would carry gear wrench or this set in particular?
Would like a set like this but in 12 point wrench and socket. More need for 12 point for me getting started on aviation mechanics
@@chrisstogie7570 They have a version with 12 point sockets and wrenches, part # is 80972. Same part count.
I have never had any problems with any of my gear wrench stuff. This would make a great starter set for a kid in mechanic school.
this would be great for anyone
@@edwardb911 have you ever warrantied gear wrench sockets? Lmao it takes like a week to get the new product and they don't ask for the broken tool back either.
The ibeam ratcheting wrench’s are awesome use them daily only need one replaced which was from putting a cheater pipe on it.
@@Jordan-ym5gf Thanks! You are correct! if you are unable to warranty your item with the original point of purchase for any reason, feel free to reach out to us directly at gearwrench.com/warranty we'll get your sorted @EdwardB Thanks!
I happen to have a gearwrench truck that stops at my place lol
My GW 225 pc set was my first big purchase 5 years ago and I still love it. It came with the 84 Tooth ratchets and feel a lot better than their 90 Tooth ratchets that I also own. The sockets are still holding strong 🤘🏽
Pro tip: Place a strip of tape on the rear of the door and B-Pilar to protect the paint from the wedge and rod. Those edges can get damaged some times.
I’ve worked in a mech shop at a refinery for the last 10 years maintaining everything from bikes to cranes and gear wrench products have never once let me down...
Those are the kind of comments that I look for. That's what I'll spend my money on.
Please make Jeff’s segment a little longer. I really like it when you guys give the insight on the tools and what the feedback is from other customers .
Today was a very busy day and I was told to rap it up and get off the truck. Too busy some times for the longer segments. Cheers!
Justin, I did just what you said not to do. I am returning today the Husky set that skips sizes and will purchase the GEARWRENCH set you have reviewed.
I own this exact Gearwrench set that I purchased after watching your side-by-side video with the Craftsman set. Like you, I think it’s one of the most comprehensive sets on the market, even with the filler bits. I felt for the price I paid, I really got my money’s worth and the tools have all held up great. The 84 tooth ratchets are among my favorites along with the similar Duralast 72T ratchets. Always look forward to Cool Tool Tuesday and seeing what’s on Jeff’s truck. Your channel is by far my favorite tool review channel on CZcams because of the content and what I feel are honest reviews. Keep up the great work and thanks!
Thank you for your ongoing support and feedback 🍻
Im not a mechanic but I love tools and appreciate your honesty and all that you bring to the community. Thanks Justin!!
Been using gearwrench for daily shop use for 3 years now. I 100% agree with you for the money you'd be hard pressed to say they're "not as good" I have snap on and matco tools as well and I can tell you gearwrench gets the job done. BTW their 120xp flex head wrenches are great.
The reason why I watch you is because of your honest opinions. I do seem to be having good luck with the GearWrench tools so far. My original ratcheting wrench set is still used daily. I enjoy you vids and that is all that matters to me.
Right on! Thank you verymuch for your kindness. I appreciate it as I work very hard to make the videos better quality and more entertaining as well as give my honest opinion about various products. Cheers and many thanks.
Your content quality has gotten really good man.... Keep it up! Cheers!
I agree with you about the nut/bit driver. I am both an auto technician/Body technician and general contractor. I rarely use one. One reason is that the hollow part of the shaft can be too large in circumference an will not fit inside some holes. The other thing is, when using them in a door to remove the window regulator/locking mechanism/air bag sensor etc, if the bit falls out and into the bottom of the door, you can be SCREWED and have a rattle, or need to fill the bottom of the door with glue so it will not rattle. I'd much rather have a full set of dedicated drivers in various length shafts. The only way I use the multi bit is when replacing switch and plug plates, since you can have both slotted and cross tipped screws.
Great video brother. I have actually been looking at this set for a long time as well. Thanks for the overview. Your absolutely right if they included deep well sockets that would have been amazing!! Keep up the great work
I appreciate your info. I dont work on equipment like I used to, which is why I started following you, but I still thoroughly enjoy your reviews. And your honesty.
Love Gear Wrench. Got my son a smaller socket set and ratcheting wrenches for a gift. And I do think a bit driver is ideal for hose clamps and a wide range of other non-automotive tasks
Hose clamps was the first thing I thought of as well. lol
The most important feedback you can give us is, whether or not this set will last in a professional setting. So many opinions regarding the quality of certain brands, but we need feedback like yours, to tell us if these brands will deliver the quality and dependability we’d expect. Keep doing a great job!!
Thank You so Very Much and I will. I love your channel by the way. Love the bargin hunting you do. Those are my favorite. Cheers!
Justin Dow... Another great video. Awesome close ups and music along with badass editing. Thank you for that. I have never had any Gearwrench tools so I can't say anything about them. I trust your opinion over most other CZcamsrs because you actually use your tools and give your honest opinion on them good or bad and that's what matters when people are looking for advice. I appreciate everything you do... Some people are just born to be haters and aren't happy unless they are putting other people down to make themselves look better than they really are.
Thank you for responding to my comment. Have a lot of tools but wanted to upgrade to new stuff . Getting ready to retire in a couple of years and I want to do some.mechanic work to supplement my retirement. Love your channel
Thanks for watching. I'm hoping to Retire within the next 5 years & spend more time with the family. When the kid's grow up & are at the house I'll most likely go back to work out of boredom. Cheers!
If I didn't already own the Harbor Freight 301pc Taiwan version tool set, I would definitely buy this tool set, thanks for the review! It's reviews like these that save the average joe a lot of money and time from having to buy complete garbage tools. It's nice to get an opinion from an actual mechanic that wrenches for a living.
I not had any problems with my gearwrench tools either, but i am just a DIY'er. Thanks for your honest review.
I've used Gearwrench a long time in professional setting and honestly this set is one of the best on the market for a lot of people . Their sockets, ratchets, wrenches work great. Its a great all in 1 set for anyone
I like and enjoy your reviews as it gives us the full picture of the products the positives and the negatives, with real working scenarios keep it up 👍
Headlights all the way!! Never looked back. Bought 2 rechargeable ones for $30 3 years ago. Still going strong
I wanted to let you know this video was the make or break buy for me. I decided to pull the trigger and get this set. I am in aviation, so unfortunately I will only work with SAE, but every company puts out SAE/metric when it comes to a mechanic set. I got this gearwrench 243 pc for 180 on ebay and I cant wait man. Even if I buy 10pc sets of just SAE, to get all the 90+ SAE tools is still wayyyy over the 180 I spent.
Great set to keep around the house for when you hear "Honey can you fix this for me."
“Least amount of gimmicky items” to just fill
Up that number, this number is all wrench and sockets, maybe 15-20 screwdriver bits, unlike h.f. Has like 60
Much love Justin videos are getting better and better your quality is better and better too, much respect too seen you through your channel come a long way over the years
Awesome thank you! I'm trying to always improve and make the video more entertaining, but also giving out my honest opinion. Cheers!
You can't really judge a set by how many pieces. Some sets give you tons of allen wrenches and other small driver bits. If that's what you need, great. But when you want a good wrench and socket set you have to dig a little. A lot of them give you about 12 wrenches, a few metric a few SAE. Now if you want a have a full set of wrenches you'll have to buy a set and will end up with duplicate sizes, and if you try and buy the missing sizes individually, they're expensive. This package seems has a fairly complete (not talking auto mechinic, average DIY) set of wrenches along with sockets. Thanks for taking the time. Good info.
i’ve been eyeing this set for a while i’m looking to get into some starter mechanics stuff and the first thing i night was gearwrench 20 pc ratcheting wrench set and i love em so this is next on the list
Where’s a retail store that would sell gear wrench I can’t find much gear wrench in my area ?
You're right, I don't think I have ever used a bit adapter for a ratchet on my cars. But in my job working on aircraft, a socket bit adapter is the best, there's hundreds of screws for each panel, a lot tend to be seized and painted, the leverage that those adapters provide is invaluable.
Cool, video! As a small suggestion, it would be nice to see the sockets, wrenches, ratchets, etc as you talk about them in full frame
Also, the Pittsburgh 225 mechanic set is pretty good and not too gimmicky
I keep the Pittsburgh set in my work trucks extremely useful and agree no fillers and stupid tooks
OH! A FSJ! I could be wrong, but it looks like a mid to late 70s Wagoneer (talking about the one you set the bag on at the beginning). I'm a fan of AMC vehicles, especially the full size Jeeps.
That is a very well thought out set for sure and a good value
I like your content always looking out for the regular mechanic u got people that believe snapon is mana from heaven u dont have to pay premium prices on all your tools but some people dont feel the same keep up the good work....
Best Tool Videos on CZcams!
I love most the gearwrench stuff, i have found that i like those nut drivers for some things but i can definitely see where you are coming from
I LIKE YOUR STYLE, AND THAT GEARWRENCH SET IS ALSOME ✅️
Alright alright alright! Justin showing the tricks to getting into your car! Nice video bro.
Grearwrench makes great sockets. I think they don’t include 1/2 deep because most people that would need them need impact. Now if they had 1/2 impacts and the 1/4 universals like you said it would be the ultimate set.
The Pittsburg 301 piece kit doesn’t have a lot of gimicky things in it your thinking of the other kit that is more of a home owner kit, but the 301 is a great kit we used to supply our new techs with it because it has just about everything socked/bit wise they would need including e-torx, the watchers are ok(can definitely be upgraded) but we could set a new tech up with that a cart, and a select couple tools and have them set for just about everything they would be doing for their first year or so. For $350 or less
Very nicely done sir 👍👍 Thanks for sharing your thoughts and videos Rodney
I’m a starter mechanic, so I just went through Home Depot’s site and hand picked some things after talking with many co-workers, friends, and family. After seeing what I liked, I ordered 120xp 3 pc ratchets, then went through and ordered Husky socket sets in their respective drives (1/4,3/8,1/2) and then a 44 pc gear wrench 12 point wrench set. I figured this would be a good blend of quality and cost effectiveness, but now I’m wondering if I should’ve ordered something like this. I did get the higher tooth ratchets, and some larger wrenches I know I won’t be using until I start getting more involved with diesel by doing this. Other than some of the larger sizes Husky skipped, and one or two larger wrench sizes Gearwrench doesn’t even make, Ive almost got a complete set. Finding room in my new 36” Husky box for those large wrenches is a challenge now though. With the new stubby, flex head, and ratcheting wrenches I ordered, I believe I’m going to have to get a small 2 drawer handheld box just for wrenches. Any ideas on wrench storage if your drawers are full? I.e, using the hutch in some way?
James York just out of curiosity, what sizes did gearwrench skip?
MrSparticus Metric was 29 mm and 31 mm, and there was one LARGE SAE skipped as well that I can’t remember off the top of my head. I knew I wouldn’t be using them for a while so I didn’t rush out to buy them. When I find a need for those 3 sizes, I’ll either buy off the truck or give Tekton a try!
James York well, I also ordered the 44 piece set and just recently I checked gearwrench’s website and found 5 sizes that are made but were skipped by the wrench set. One was the 29mm.SAE skipped 9/32, 1-3/16, 1-3/8, and 1-7/16. Found them all on amazon and completed the set. Some are oddball sizes hardly used but I’d rather have them and not need them then need them and not have them.
I was close to getting this set but I went with the klutch set from northern tool 245 piece set for $180 with only a few bits and I love it
I recently picked up the Gearwrench 1/4 and 3/8 socket sets and I added their intermediate length sockets with them. I got pretty good deals on them. I think HD has a deal on them currently.
As far as using, yeah they seem great so far. One of the reasons I got them was to get their 120xp ratchets that they came with. They give you a good deal if you buy the complete set vs buying just a set of deep sockets and a ratchet. Gearwrench and Tekton are two of my favs now. Also just to mention - the Gearwrench XL ratchet wrenches are great too. Love the longer sizes.
I have the same kit I put the white plastic wedge in the door an pulled out the little pumper an had my finger in the crack of the door an the wedge popped out I swear I seen a white light felt like I was going to pass out but now I pump it up enough to shove them in deeper to the cut out part on the top of them
I bought the gw mids in 1/4 and 3/8. Been really happy with them. Got their locking extensions as well and was really impressed by the locking ability.
Great video justin and the quality is awesome on your videos of late man !
Thanks I appreciate that. I’ve worked hard to get here and with everyone’s support as well as yours has made the quality what it is. Thank you very much
Solid video always love your real raw input on tools and things cheers 🍻
Thanks Brotherman. Cheers!
Awesome!! You're right about tools!! Snap on is not the best in everything!! Over price tools!! I have Craftsman, Tekton, Sks, Kobalt, Crescent, Dewalt and they are very nice tools..
Looks like a really nice set. I use some GW and so far so good.
Auto Value auto parts stores sell Platinum Tech tools too,seen the ratchets in the flyer.I have had a 10mm Gearwrench ratcheting wrench come apart during use warrantied out.There is a 12 point 14mm spark plug socket for BMWs
That bud light though is special ♋️
Smaller hex and smaller torx is one thing. But something like a T40? Nah, forget it. Give me one with a 3/8 socket base lol
Agree with you on the Pittsburgh set.
I had one issue with a Gearwrench set…. Freakin socket rusted in the case even though it had never been used. The only one in the whole set. 😂
1. Gets new tool set
2. Locks garage door
3. Wife bangs on door "You're not watching pron in there are you?"
4. "Nope!" Drops trou
I thought I was watching one of my own videos with the scanning across the tools with music ! 🙃
I learn from the best what can I say Clay. I like your style. Where do you think I picked up the hand slap to the camera from? Cheers my main man and thanks for all your support and suggestions. Cheers!
I bought the Gearwrench 232 piece set, since it came with ratcheting wrenches, Hex, Torx and E Torx sockets
Thanks for the video. Good practical advise.
Great video! It would be great if they would include a basic screwdriver set and some pliers.
Love GearWrench! Have there master speciality bit set (e-torxs, Allen’s, etc.), master 1/4” impact set, and want this 243 piece set so bad! Haven’t had a single issue with any of the GearWrench products I own. Great company, easy to deal with there warranty systems as well. Call me a fan boy, but I back them up fully!
I couldn't live without my hex sockets I have both snap on and gearwrench ones in short mid and long and there very important for my job.
My co worker uses lots of gearwrench and I don't like there long hex bit sockets at all but there are very usable tools. Gearwrench makes some top tier tools for there price point, and are a great alternative to tool trucks. I will not but the modern craftsman line at all, they need to take a step back and fix that brand to what it once was.
Three years later they have a set with comfort grips, pn 80949. I'm trying to find some place that will ship them to me over seas.
I liked how you set the rules. You got my respect.
Thank you
I just bought a 98 piece steelhead scoket set off Amazon to put in the back of my SUV
Love me some Gearwrench!!!
Appreciate your experience with reviewing different tools .thanks for great video's.
Replacing a 29 year old craftsman set (best set ever) I narrowed it down to gearwrench, ICON and Milwaukee. Dewalt was in the running but got knocked out as it didn't do well in the project farm review video. So it's now down to 3. Which would you choose? Price is not a factor (I eliminated snap-on already due to that) I'd rather it all be in one case unless 3 seperate draws but it's not a deal breaker. For me weirdly enough having the size large and easy to read is actually one of the top 3 most important factors to me. My eyes aren't that great anymore and my craftsman is so rusty I can't even read it any longer. Set completeness is my second factor (includes deep socket and goes from 5mm to 24mm and up to 1" on standard, and includes sparkplug socket. For some reason there is NOT ONE single manufacturer that has all these factors in 1 set, I'll have to compromise on something for sure. It baffles my mind how the manufacturers don't ask their customers what they want to see in a set. 1 company had 14mm as a skip, not too many include deep sockets and most leave out sparkplug sockets. It's crazy, I'm honestly tempted to work with a manufacturer and produce my own line to my specs because I think it would sell since I'm basically looking for the same exact options that 90% of everyone else wants in a set too.
I never used them. But I read a lengthy write up on amazon concerning the difficulty someone had trying to warranty their items
The Pittsburgh jumbo combination wrenches with v groove are a good set. They haven't failed me. Just don't use a second wrench as a cheater for more torque, or even bang on them and you'll be good.
Nice gearwrench set. I'll have to look into that for a mobile set
Im a gearwrench fan! Own many other tool brands also. I know a good ratchet, sockets and wrenches.... Gearwrench has very good quality! Better than husky, better than kobalt, and many others for sure.
wonder why the 6 point is $100 more than a 12 point set. Had me interested at $250 but not $350
Great Review, I love Gear Wrench, now saw it carrying it at Home Depot, not so long ago i bought Husky Master Mechanic set that comes with an impressive 1021 pieces, comparing that to the now offered Gear Wrench Master Mechanic Tool Set with half piece quantity for even more expensive price, would love to see a video comparison between the two. I favor Gear Wrench over Husky but the Master Mechanic Set of 500+ pieces if I recall well was not available when I bought it. Husky comes with tools I will never use at all, humongous wrenches and such but I do think is is a little more completed, full screw driver set and all sorts of impact sockets. Gear wrench is nice to collect their various sets individually but this would be crazy expensive, i know people who do it because they swear by it just like you said you have never had an issue; my dad introduced me to Gear Wrench back in 1997 but Husky have been around since 1924 and in performance tests it comes on top of Gear Wrench, still i do like GW better. When I decided to shell out 2k for the Husky set I have been with a basic Craftman mechanic tool chest for years without any issues or complaints that i got at Sears for $100.00!
The Vessel drivers are very good. I have a bunch of them. They invented several Japanese screwdriver standards. The only annoying thing about the Gearwrench reversible ratchet wrenches is that while the inch size has that lip on the socket so the nut doesn’t pop out the back. But the metric set doesn’t have that. I don’t know if they have a metric set that does, but I was disappointed. Also,the inch set has adapters that fit into the sockets. The metric set doesn’t, or at least I can’t find it.
Not an auto tech but I keep my farm equipment running I’ve had good luck with the dewalt 192 piece
Have you ever tried Tekton there really great and affordable you should definitely review them in the future
I think i need this GW set for my business when i do onsite jobs. Looks and sounds amazing. Great review #gearwrench #gearwrenchtools
I really like this kit, but I like more the tekton 3 piece bundle with 1/4, 3/8 and 1/2 all in separate blow molded cases. I’ve always liked that blow mold 3 draw chest though.
I absolutely love the 301 piece by pittsburg i think its the best
This set was on the National Tool Warehouse website, but they removed it for some reason a few months ago. I'm in the process of trying to get it through the independent truck now. We'll see.
You can get it from the Home Depot website.
The 12 pt set is significantly more expensive but better for pure hand tool use. The 6 pt set is great for anyone that utilizes power tools whenever possible.
HEY, GREAT VIDEO, where can you get the 90 tooth 243 piece GEARWRENCH SET, AMAZON SAYS 84 TOOTH??????
For $110 I got a husky brand h149pc mechanic tool set from a ebay reseller store and it's decent but I lately got a husky brand h194 mechanic tool set for $65 and 20 shipping from Mercari and I like them but they have almost zero 1/2 inch deep sockets but I prefer the h194 over the h149 mechanic tool set
I would have liked to see mid lenght sockets included. I love gear wrench mid lenght in 1/4 and 3/8 in sae and metric. For the price they cant be beat.
I freaking love gearwrench. I have their semi deeps and they are my go tos 80% of the time (3/8). I do own snap on and grey pneumatic a little matco. They are nice as for price for durability gearwrench is extremely well. I use them as a professional everyday. I do some road calls and been meaning to make a designated go bag strictly for the go. Some times I'll grab stuff for get what I grabbed and its easy to leave or loose tools. Something like this kit would work wonders and seriously thinking of buying. Hows it been holding up?
Little pro tip unlock passengers door. That way if by chance something happens like breaking a glass or handle it's not the primary door. If I break it I fix but it's not something that's always in stock Yes slim chance but can definitely happen
Thanks for the vid. Great job
I have that same vehicle entry kit... works awesome....
I just got my first Wera zyklop speed ratchet its nice but damn is it expensive. Looks like this set is running around 300$ I wouldn't have half that for 300$ from Wera. But I would tell anyone to look at a set of hex plus L keys they are a big step up from any other manufacturer.
I just bought this set. Easy to keep by whatever I’m working on, and nice layout. Got it mainly to replace some old craftsman ratchet wrenches that always get stuck.
I like it doesn’t skip sizes like my old craftsman set.
Only complaint is no T27 socket.
Well said my brother.. haters gunna hate
Thanks Justin!
I like my gear wrench tools.
There warentee is fantastic I have got so many replacements for free
I broke the ratchet mechanism in a Gearwrench ratcheting wrench. Only decent way to get a replacement was through Napa. Home Depot wanted the rest of the wrenches in the set... And that's just... Dumb
Good video man thanks for the great content
I love my Vessel screwdrivers
Cool video
Speaking of coming back, how’s this set?
have time i would like to know what sizes come in the allen sockets in this set i have a couple friends wanting to get in to small engine and some farm stuff and those allen sockets are perfect for bearing lock collers and such and or some set screws on pullies and or chain sprockets
for the 3/8 drive socket allen's they start at 2mm, 2.5mm, all the way up to 10mm. for the 3/8 drive sockets for SAE this set covers 5/32 up to 3/8 no skips. as for the palm driver the allen's bits covers 1/8-5/16 and 4mm-8mm no skips.
@@JustinDowDIYcentralhighway yes i seen the sockets and that is great for them was there any ase allen sockerts
I see they have 13/16 spark plug socket I've haven't delt with a plug like that in years
Small motors is the only place I've seen them.
Mostly on older dodges everyone else has made the change over to 5/8
@@JustinDowDIYcentralhighway one of the nicer if they want to put in the 9/16 insteed of the 13/16
Morning from NYC . Is it possible you can post Scott's website and also ask him if he can ship to New York. I would appreciate it .