Video není dostupné.
Omlouváme se.
Jeep 2.5L 4 Cylinder YJ Power Steering Pump and Serpentine Belt Removal
Vložit
- čas přidán 7. 11. 2019
- How to remove the serpentine belt and power steering pump on a 1994 Jeep Wrangler.
Tool List:
• 1/2 Inch Wrench
• 1/2 Inch Socket
• Ratchet
• Crescent Wrench
Want To Support This Project?
• Patreon:
/ jeepsheeptv
• Subscribestar:
www.subscribestar.com/jeep-sh...
• Online Store:
www.jeepsheeptvstore.com
#Jeep #JeepWrangler #4cyl
#Jeep #2.5L #YJ
Saved me a lot of money and time! Thank you.
On my 95, there’s an additional 9/16 nut under the pulley that prevented me from loosening it as shown in the video. Didn’t find it until I had every other bolt out 😅
That sounds familiar. I wonder if mine was missing that nut..
@@JeepSheepTV it holds the position adjust screw in place but also locks the position of the pump when overtightened. Love your videos!
what’s the exact size of the bolt at the top of the power steering pump? i lost mine and need a new one
I snapped my tensioner bolt trying to put my belt back on after replacing my alternator that was seized up. I guess my only option is to buy a whole new pump assembly
I would try for a junk yard or ebay first. Or if you can get a long enough bolt It should work. Might need to grind down the end a little but you should be able to figure something out.
I know this is fairly old video but do you know if the motor mounts for the jeep are the same ones for the dakota? can't find them anywhere
Sorry but I don't really know what was used on the Dakota
@@JeepSheepTV Thats ok I looked thru a few of your videos and got some decent views of them and they look way different thank you for the reply though