Honing Blocks
Vložit
- čas přidán 10. 01. 2023
- NEW MERCH⬇️
britneyautomotive.squarespace...
SOCIALS
Instagram
/ britneyautomotive
Facebook
/ britney.friesen.94
TikTok
/ britneyautomotive
SPONSORS/PARTNERS
@HolleyPerformance
@briantooleyracing3554
@heatwavevisual
@Motul
@NitrousOutlet
@menscermotorsports6008
@Jaxwax
Heatwave
glnk.io/n86p/britney-friesen
DISCOUNT CODE: BRITNEY_10
Brunt Boots
bruntworkwear.com/discount/DI... CODE: BRITNEY10
• Lake Speed's Ford C3 N... - Auta a dopravní prostředky
Whole new meaning to running engine.
😂😂😂😂
Whole New meaning to running engine
I can't lie.... their are a lot of people that put up videos that race yet know nothing about what they race.
This easily puts a lot of the content being produced a step down. Informative on a skill and knowledge with what you race.
As a mechanic I always believe it gives a great advantage to anyone that races to understand components and they many "why's" and "how's".
I'll definitely tune in more to your channel after this one
@britneyautomotive......... No I highly doubt with a different handle you're the same person
Thank you!!
Good work Britney. I love that you are always trying to learn more and more about your car and fixing it. Knowledge is power.
Thank you!
Cool 😎. I have been doing this since the 80’s when I freshen up my engines at home . Love the content and also you rock the headband . So refreshing to see people carrying on the passion !
Thank you!
Thank you for explaining honing.The first step is is to understand it.I Finally found a video with someone who explains it.Thank youuuuu
Glad I could help!!
Glad to see you did that properly. Most people probably didn't know to start the hone before going into the bore and keep spinning until you were all the way out. Can't wait to see what kind of power that engine makes when you get it together.
Thank you!
Kinda of a no Brainer lol
@@peterhejny363 I've seen people just stop in the bore and then take the hone out. Not everyone is mechanically inclined.
@@peterhejny363 definitely not a no brainier lmao half the guys that apply for jobs here wouldn't know that
@@freedomfox8183 Half the people would know you should only use a bead honer on newer engines or race engines that frequently get proper boring or resleeved.
Bead honers follow a old bore even when has moved with hollows and deeper walls as old engines bores warp under heat.
Try using the solid honer and can see low and high marks as being shiny and they fix that and make the wall even again while the flexible bead honer just follows this and hones it as is.
Why top fuel etc use them between runs just to clean a bore but as they say theirs are perfectly straight bores and fresh.
Love seeing you work on your engine. So amaze me seeing you doing all your Engine work your self. Hope you inspire other Lady's to start working on there own engine's and vehicles. Your Father did a awesome job at raising you and teaching you how to work on vehicles. Can't wait se see this engine pulling you down the track.
Thank you so much🥺🤍
rofl.... come on dude, really?
Orange 🟠 and Black ⚫️ cars and trucks hit the target 🎯 Nice choice. 👍
Thank you!
Great video and very informative! I'm learning something new with each upload...I'll have to put some of these tips and tricks to the test on my '01 Pontiac Trans Am
Thank you!!
Thanks for the description of what honing does for freshening up cylinders. Awesome job. We need more women like u that aren’t afraid to get their hands dirty 😊 looking forward to ur next video
Thank you!!
Lol, are you serious? What a joke! Someone is telling her what to do and say you can tell she has very little experience. This is the society we live in today. You are looking forward to her next video showing you something she just learned so she can make a video in her yoga pants and earn a youtube living! Laughable!!
Women are experts at honing.
WOW! I am genuinely amazed. I have been watching car videos since the start of car videos and I have seen everything you want to know about everything else but honing a cylinder bore. I thank you for sharing your drag racing dreams with us and your learning experiences has helped me gain even greater love of the sport and what it takes to do it. I've always had a great respect for engine builders and races and I now have great respect and administration for you on your journey. Thank you and the Film Crew!
Thank you!!!!
Good stuff! I've only honed small engines, but same concept. After doing a couple I learned that it wasn't necessary the speed of the drill spinning, but more of how fast you go up and down the bore to get a nice cross hatch pattern. Not too fast not too slow. It's tricky. Thanks for the video.
Thanks for making dope videos! You always make sure they're great quality!
Thank you!
Yes i love my dingle ball honer…i rebuilt a hand ful of 5.3’s and 6.0’s in my garage with it……it is actually a very very satisfying tool when you use it like a before and after shots……although i havent used it in over 4 years😢 all my motors run great and my spare fresh built 6.0 back up motor is still sitting on a stand in the corner of the garage….its literally a brand new engine…..
I never pictured my mechanic as beautiful as you are and not only that but a skilled mechanic. Breaking the pattern. 😎👍
Thank you!!
Now I cannot wait to do my own block!.😎🙌Thank you and excellent content by the way.
thank you!
Impressive Wheels on the Engine stand! I've never moved an engine stand that smooth!
Lmao
Hello, men of culture. So we meet again 🙋🏻♂️
That grinch run🤣🤣
I was thinking that while I did it😂😂
You are an admirable professional, you have all my admiration
Very informative video! Thanks!
That opening was funny AF!!😂👀💜Not a gearhead so no idea what you're talking about, but great video. Love how you explain everything. Always feel a little smarter at the end.👍
Thank you!
Awesome video. Lots of great info. I was worried you were going to hurt your hand breaking those lose. From someone that has also had a broken hand recently, that’s all I could think of
Thank ya
WOW !!!! Even just dingle ball honing left a great cross hatch pattern
It does!
Excellent advice and work 💯
Thank you!
Excellent video presentation. I have subscribed. I think you have "it" and i wish you the best on it all. Im more interested in regular general car repair (not into racing myself or anything like that) but i did learn (and will now retain) what this video's purpose was and i appreciate the clear video!
Thank you so much!
Very informative!! Great Stuff
Thank you!
Awesome content! Keep up the quality vids! I’ll be doing this to my spare engine soon
Thank you!!
Cool, thanks for the educational video captain. Good work as well.
Thank you!!
I’ve always just called it cross hatching.
Good job on videos. Too short but keep up the good work 🤘🏻
My dad use to have one of those never new what it was for lol 😂😊❤ honestly i can see a difference in the side shot! ✌️
Tech tip best way to clean bores after honing. Use atf of a lint free clothes and wipe them down.
That's pretty cool, thanks 😊 👍
Thank you!
@Britney Automotive You're very welcome ☺️, keep up the good work too!
GREAT JOB!!!! It’s really Awesome to see you do your own work on your Block and Car!!!! I’m a type of guy that could mess up a Sandwich,,,I guess that’s why I’m broke having other people do the work on my Car’s🤣👍🏁
Thank you!!!
Followers Growing super fast.
I say 200k by end of February early March and half a mill by April/may.
Good content, great vehicles, knowledgeable, easy on the eyes.
Works.
Thank you!
Wd40 or diesel fuel really does the trick! Great advice for new up comers to learn from! Keep up the good work btw those pointy things pointing back up the bore are called “oil squirters” just in case anybody needed to know lol
Thank you!
В России они называются масляные форсунки (Oil injectors)
fellow kentuckian, mechanic and gear head here. always love to see another female in the car scene. thanks forbthe content
Thank you!
That was a great video I really like watching your channel I'm also a diesel mechanic keep up the great work can't wait till your next video much love ✌️✌️
Thank you!
Beauty with a lot of brains, amazing, and keep up the excellent work.
Thank you!
Really enjoy your videos new subscriber here!! Keep up the hard/good work
Thank you!!
Beautiful and loves cars I still have faith in this world seeing this! Keep up the great work!
Thank you!!
@@britneyautomotive Welcome!🤙🏻
😍💚🏁 the DM Thoooo.
Talented young lady. Love the content here.
Thank you!!
Good Job Britney 🏁🏁🏁
Thank you!!
5:40 "I don't like you" I think that's the nicest thing I have ever heard anyone ever say when working on something tough in a garage 🤣
Great job and great video!
😂😂😂
Those pieces you took out are piston squirters. They squirt oil on the bottom of the piston for cooling. Used a lot in boosted applications.
Pls watch the video.
Epic work
Thank you!
This process likely loosens up the friction and lowers your oil pressure. But, when a motor is a little loose, it then revvs faster and produces more horsepower. My 65 Nova was loose like that. To remedy the oil pressure situation, I just put a high flow oil pump and a 6 quart pan in and on. At idle my pressure was about 15-20, but at high rpms it was pushing 110 psi. Little monster screamed for a 30 over 350 with a power glide. I was pulling past Dodge Viper's up until 120 mph, which that low top end was because I had just 2 gears, being that it was a Power Glide trans.
My next plan was going to be a TH350, but unfortunately I sold it to buy a house that I no longer own. If I still had that beautiful rust free sky blue 2 door 65 with 6 point cage, it would now probably be worth more than I paid for the house 😭.
She's so beautiful. I just want to lend her a hand! Wow, one of the most beautiful mechanics I ever seen!
thank you!
🏎🏎
Your face was red as the engine stand ,breaking bolts loose , engine maintenance 👍. Love a lady who works on her stuff .
It was indeed😂 thank you!
love the info you provided , such a smart cute chic , can you rebuild my motor & turn it into full beast mode ❤
I don’t want to lie , but I’m fall in Love with this angel 😊😍!!!
🤍
very informative video!!
Thank you!
Mis videos favoritos ❤
I just started watching your channel and I have to say your camero looks amazing Britney
Thank you!!!
First of all it’s Camaro lol. Jk
I see this channel growing very fast threw 2023
Thank you!
Thank you so much for the video!
Thank you for watching!
Thanks for the information, I didn't know many blessings 👍
Thank you!
Truly the world's most perfect women. As a master tech for many years, parts, service manager, GM, I would love to have someone like you, you have knowledge, skills and personality and an ability to communicate this info while being fun.
AWESOME! And thank you.
The beginning killed me😂
Отличный у нее блок!😊
Thank you!
Love it 😊keep up the great work Britney wish you all the best for the new year you make me miss my black 96 firebird maybe one day find a black formula firebird and put a sb2 under the hood with a jerico manual trans🔑🖤😘🌹😎👍
Thank you!
I’m a fan of the glasses 1000%!
Thank you!
The opening was great what a block
Thank you!
Your welcome 😊
Good work!!
Thank you!!!
This girl knows what to put on her thumbnail, damn!
The running at beginning lol 😂
😂😂😂
One little 🪨 would've been fatal
When a woman demonstrates how f*ckin' smart she is, it does something to my soul; tugging at my heartstrings.
🤍🤍🤍
This is the first video I've ever seen!
It was in my news feed on CZcams so I clicked on it!
Btw your hair looks like angel wings!
Thank you!!!
I’ve heard of taking a walk around the block, but never taking a block for a walk around the block 🤯
You must be a regular blockhead then
@@turbot6592 I have been known to be called many types of head a few types I cannot repeat.........
Holy yumm
Slide the box end of a wrench on your t handle allen to help break loose any bolt or insert. Btw.. love the content keep ‘em coming.
Thank you!
Great explanation ☺️ I'm going to make my boys watch this. Scratches for oil 🪔🛢️
Thank you!!!
@@britneyautomotive and good luck with the project 👍 it looks like you are doing great on a killer build!
Hell, I already knew all that stuff, I was here for another reason😎
Brittany is healthy. Very healthy. Keep up the great work
Thank you!
🔥🔥🔥🔥🔥
Thank you!
Yeah the beginning is great!!!🤣🤣🤣
Thank ya😂😂😂
@@britneyautomotive The funny intro is a must anymore. Gets ya with a hook and then ya have to keep watching for more little silly things throughout the video. Keep up the good work. Can't wait to see the car out on the track some more. I've been a diehard fbody LT1 guy for a while. But we all have to move one eventually if we wana go faster. Lol
Goals 🏁
Thank you!!
good vid girl keep up good work
Thank you!!
Cross hatches are a must in the cylinder wall. I always ball-hone my blocks regardless. In my mind, it adds maybe 100 thousandths to the ring gap so that's good too! Just make sure you're using the correct ball hone for your bore size... it's not one size fits all
Facts
I am surprised that the bolts on the piston squirter's were so tight. I get the part that you don't want them coming loose going down the track at 7k RPM but what is the torque specs on the bolts that hold those in anyways do you know off the cuff. Thanks for sharing this with me and the family and the ladies just go nuts when you come out with new videos. You all have a great morning and enjoy your day, I will be passing this on along with the other two here, LOL. Enjoyable as always .
Станок зачетный!
I like the way Reid thinks lol I’d definitely rock the camera crew shirt 🫶🏽 someone’s gotta rep it back here in the DubK
High Knees 😂❤
Smart Lady with the work even more with the thumbnail. Bravo.
Thank you!!
BEST OF THE WORLD GIRL...
Thank you!
...nice job & explanation of the oil control ! What grit stones on the dingle ball ?...
Her sidewalk is so smooth
It’s new😂
Hello from Puerto Rico and nice video keep up the good work.
Thank you!
The type of finish is determined on what ring your running and what it takes to break that ring in correctly.
Many people think it takes a long time to break rings in but from what I've been told, 1 good pull on a engine dyno and dey brokes ins!
Good vid, not many people know about the cross hatching inside the piston walls. Would recommend you get some socketed allens, would save your hands and make it so you can torque them down better than that t handle. I've hurt my hands some many times trying to break allens with t handles and finally got a metric and standard set to 10mm and 3/8" and so glad I did
I have a set lol t handle did the job fine
Thanks for the tribute to ken block 😇😇😇🥺🥺
Thank you for watching!
You can use light pink like 5/30 to hone as well
I died when you were breaking the squirter bolts loose😂 the face of “DID THEY SNAP” was real😂
😂😂😂
Nice. Very beautiful too.
Thank you!
I'm in love 🥰🥰🥰🥰
🤍
Mint 😎💯👌🏽
Thank you!!!
Luv your work.. keep it up 😉💯💥
High knees were beautiful 😍
😂😂
👍✌️😎 saludos desde Guadalajara 🇲🇽
Hi!!!
@@britneyautomotive Hola 😎
Good workout 💪 😁
Right?