Inside the cheapest soldering iron on ebay.
Vložit
- čas přidán 28. 01. 2016
- I was looking for soldering bits on ebay and saw this very cheap iron that obviously wasn't grounded. So I bought one for us to take a look inside.
Sorry for the rude jump-cut in the middle of the video that soiled all the juicy teardown goodness. The iPad decided to curtail the recording due to low memory, which is reasonable enough. Although there would be a lot more memory for video if it wasn't filled with no-choice "apps".
You can toss Big Clive a dollar for coffee and cookies at / bigclive
I'm not going to provide a link to the iron, since the lack of a ground connection makes it a bit shady for electronic work. - Věda a technologie
Ah, come on, it's broken but it's very easy to fix: just take your soldering iron and... nevermind.
Lol
Just open the soldering iron and twist the wires
The "quick release" power cable is a safety feature ;-)
I have had 120v AC through my arm and it didn't hurt that much. I can't say about 240 though.
Great Value Bleach "But wait, there's more!" ;-)
It's the spasms that make sure you die if you're unfortunate enough to get a live conductor in the palm of your hand - your hand will instantly clench around the conductor, making sure that that's the last thing you ever grab.
Hmmm... That leads me to a thought... Instead of having politicians place their hand on a bible when taking office, get them to place their hand on a 240V conductor! :-P
I've touched both 120V and 220/240V AC@50Hz, by accident. Survived both, but let me tell you, 220V is not a pleasant feeling. While it was less than a second, my arms were shaking for hours afterwards and it hurt quite a bit. Not nice, at all.
For a few $ more they sell the exact same iron, but with a strain relief for the cable. Clearly the luxury model lol
sounds like a great bonus for your friends to get a mild laugh and then help you out if they were watching
Wow, that's a lot of metal and assembly for $1 :)
Given the cost constraints, I'm pretty impressed by the build quality.
ThisIs MyName hahah same xD
I live in Thailand and bought one of these yesterday as an emergency soldering iron. It cost me 20 Baht or about $ .60 US from a 20Baht store (similar to a $1.00 Store).
The first thing I did was measure the wattage and my unit showed 31 watts versus the sticker that said 40 Watts. Here in Thailand we run on 220 volts AC. The iron actually
works fairly well, heating up time as expected is long but it does solder. This is no substitute to a soldering station but in a pinch will do the job.
they didnt solder them wires on because they dont even trust using their own soldering irons to do the job .
LOL
they could have at least 'crimped togetherthe heater wire and line wire joints instead of what it looks like a temporary twist.
They were going to soldier it but there iron broke.
Back when I learned basic soldering in China, I was NOT taught to solder wires together, just twist them together.
No, we do not have much regard for safety, us Chinese seem to have a have a "as long as it seems to work, it's fine" mentality. That shows in many aspects, including schooling and parenting (as long as the students perform well in academics, who cares about mental health and personality development? It was hell back then, though my caring teachers tried a lot to improve things)
You are not supposed to solder that wire with tin. That would simply melt because of the heat and risk creating a short out too.
But it's not supposed to be just twisted together too.
As an adolescent I bought such a cheap soldering iron from the bargain bin at the local hardware store. I lasted less than an hour before the heating element burned out. The store proprietor was kind enough to give me a replacement, but it didn't fare any better. Since then, I've preferred Weller industrial soldering stations. Repair parts are readily available and they hold up for hundreds to thousands of hours of use.
i want this guy to read me stories every night
privileged Same
lmao
privileged LMAO so do I just got that kind of voice
Bruh lmao 😂😂😂 he does have a nice voice 👌🏻
Sounds like Sean Connery!
The mind boggles!
Thanks for the video Clive, you got a really nice mention the other day on aVe.
Define irony, a soldering iron that contains cables are not soldered. Great videos, love your presentation. Keep up the great work.
I took a cheep 4$ harbor freight soldering iron and replaced the tip with solid copper wire (AWG 6 I think) and plugged it into a dimmer got decent results.
Found one for ~$2.60 at Menard's.
This is actually one of my favs in the $10 and under range. It has the most flexible power cord compared to all my other soldering irons I've used. Not a high wattage iron, but if you use a piece of solid core 8 AWG copper wire, it works quite well. Make sure to wrap a piece of solder around the tip before it heats up so it gets that coat before the oxidation sets in.
I swear if i had the money i would buy this guy everything he need to take his quality to the next level.. Editing PC, lighting, mics, cameras, etc! Man, you have a VERY unique channel! Gold play button incoming!
I think one of the best parts about Clive's channel is the fact that it shot guerilla style. You have the feeling he just turns on the camera when he is at his workbench and he has a feeling something interesting might happen. It's very laid back and casual.
Something about his basic production style really works for his videos
Very few of the cheaper soldering irons in the US have an earth/ground.
I know nothing about electronics, so common sense tells me to stay away from 99p soldering irons on eBay. Unfortunately not everyone thinks like me and many people would go for the "bargain", I do hope they see this video first. Of course there’s plenty to laugh at and some of the comments are brilliant, but there’s a damn good chance you might have saved a life here. eBay has to start taking some responsibility for the unsafe shit they allow people to sell, because let’s face it some people just aren’t capable of taking responsibility for themselves. Brilliant video, very well done posting it.
Following your glowing review I got myself one of these! I was impressed with the build quality and mine had the special feature where the handle & soldering iron end would wiggle when pressure was applied. Undeterred I plugged it in, it started oozing smoke from two of the holes on the metal body. One hole was a steady flow of toxicity while the other was just a half hearted attempt which wouldn't score higher than a 3 from an olympic judge. After about three minutes I measured the temperature of the tip with my thermal probe - an impressive 280 degrees and rising slowly.
So I thought time to attempt some actual soldering/desoldering. I hovered my smoking tool over an old motherboard and touched the tip to the grounding tabs of the usb socket assembly and pressed firmly to compensate for the built in wiggle feature. I waited and after about ten seconds I could see the surface of the solder changing colour with and the iron also ceased smoking - Hurrah I thought! But then nothing else happened, so I pressed harder, waited, still nothing. Then I moved the tip to a smaller solder joint, pressed and waited - nothing. I decided to do my unique soldering iron tip temperature test where I move closer the tip end of the soldering iron body parallel to my lips to gauge a rough idea of the temperature - not very hot was the response from my lips!
I applied my thermal probe to the tip and it stated 87 degrees and falling. After unplugging, waiting and trying again, it seemed like my wiggly wobbly Chinese soldering iron had gone to 99p heaven.
So to conclude, I had enjoyed a ten minute mini toxic smoke-display and almost managed to melt a solder joint (to be fair it was a bigun) with my 3D direction adjustable body soldering iron before it expired. :-(
On the plus side my mains lead seems to be firmly attached!
im not sure how i ended here but i have the same one i bought from ebay and have used it on and off for 3 years now and wirks well
i bought one and it burned itself, not kidding
That looks even worse than the crappy soldering irons they sell in Homebase, probably doesn't even last any more than 5 minutes. None of the ones I got ever did.
+CoolDudeClem Nope, works it fine.
+xlvxjang You got one of those cheap ones too?
+CoolDudeClem the cheapo homebase and such are just a similar version that has been tested (i would hope!) for safety, and fitted with a UK spec power cord and plug(along with a huge homebase markup) but the irons themselves are still as bad, terrible tips, and lucky to get 2-3 uses from it before it dies.
Sony Trinitron
ye, i tried it. can solder basic things :D
thank you clive I realise you must be very busy talk about leaving us in the lurch I will consign it to the bin thank you
Clive, the power cord pulled out with little or no effort. I would have no expectation, none at all. Holy shit, just as well the power cable pulled out, it saved the day. That "iron" wasn't fit to be powered up in the first place. Now it can all go in the bin, where it belongs.
I had gotten a trisonic brand soldering iron from a dollar store near me, much like the design of this one. The mica foil got everywhere. I added this videos link in the teardown video of my iron. Keep doing these vids, I feel things like this should be exposed for there lack of care and quality.
Thank you for this video, Clive.
I sometimes watch these videos just to hear a Scottish guy complaining. RIP Grandpa.
I'm using the soldering iron for about 1 year and it works excellent
This is actually sold on every popular malls on my country.
The bits are interesting. I'm used to lovely Weller soldering iron bits (copper core, iron coated, plated, tinned, etc.) These cheap irons come with effectively a nail which corrodes *really* fast.
I bet this would TIG your connections real good.
that was a joke video 😂
+Jimi-ray grotenhuis Which video was it from again ahah
+ToonEvans that led light in ac
gamer right?
It only costs you your life!
been using this one for years
Don't forget some of us use them for things like model railways and models generally, and the earth is not so important. I keep cheap ones as backups, and have about 10 types of irons! I nearly always swap the tip for one made from phosphor bronze rod, they wear, but retain the tinning. Asl these cheap irons are good on dimmers to give a low temperature iron, for 145c solder and sub 100c solder like woods alloy.
Stephen.
This is the best most honest CZcamsr out there +bigclivedotcom
Makes the cheapest one from Harbor Freight Tools seem legit.
vector6977 fr them harbor freight ones ass and this is somehow worse
At least HF ones have to be approved for sale in the country. This can be incredibly dangerous and customs will let it through
When you opened it I immediately thought "Looks like they used a 99p iron to solder the other irons' wires!"- canna believe they were just twisted together, it's so bad it's great 😂😂😂
I love the fact that the wires are twisted together inside the metal bits... And.... the other end leads to an unfused plug...
I recently purchased the cheapest 60 watt iron I could find on Ebay. It shares the same plug as yours without "holes" in the tips for hot and neutral. Also, the plastic handle gets hot. But it does work.
The Harbor Freight irons are only 30 watt, but they are also pretty good.
Interesting video. But for 99p, its not going to be the best quality in the world. Also I think these cheaper irons would be much safer on 12 volts than 240v as if those wires come off like they did in this video. Having 240v up ones arm isn't going to be pretty.
+BritishRail60062 yes i have a budget iron, but i bought a 12v one, (cost me £2!) and tips are cheap too, its been reliable for 3 years and hundreds of uses, i have a small 12v battery i keep charged for it (yes i could also use an old pc power supply i have modded too)
+jusb1066 Wise choice sir. Much safer than getting zapped with 240V AC.
+The Joker: At 13Amps going up ones arm. Its not going to be a good outcome. Still you get what you pay for :/.
+SigneM-Prut#1. With 13Amps? You must be either very lucky or not touching ground I bet.
+The Joker You guys have no idea about electricity, please stop feeding each other bullshit.
in around 90 or early 2000, in Indonesia, so many soldering iron's model like this. But the filament made not like that (in this video), still more secure. But when i bought the similar one around 2011, and want to join my components, i got electric shocked !!! I opened like you did and whoala... similar like in this video.
both of them, same China made but the last one more cheaper. Around 90s it cost about 20 dollar but now only 5-6 dollar.
Cheap and everyone who bought this also price theirself so cheap for safety.
I might retire my fx951 and invest in one of these lil beautiful beasts!
The cheapest soldering iron I ever took to bits didn't even have as substantial of a handle as this, but it actually had a ceramic heater and a pair of binding posts for the wires...
I have one of these, only mine slightly melts the plastic and the heating element not only burns electronics but also sends electricity through it. I can't wait to get a new better one
Recyxle Studios Jesus lmao
Recyxle Studios Burning plastic, mmm smells like quality
1 Ebay seller has sold 700 of these kits for 9.88$ with free shipping. I bought one a couple weeks ago and it works fine. Only issue is that it comes unplugged easily. I would recommend spending double and getting a better kit if you are going to use it more than once ever few years.
I have that exact solder. It cost around 0.80 USD, and i use it to replace a microswitch in my mouse, which was double clicking.
It's not bad, and it's still running ok. I use this to fix loose soldering, basic repair and such.
Here in the USA, simple things like soldering irons are almost never grounded(earthed). Even electric hair dryers and vacuum cleaners are rarely grounded. When I ordered a British made Antex XS25 soldering iron(which I might add blows my old Weller out of the water) I was very surprised to get a three-prong plug. It is in my opinion more of an inconvenience as half my house is outfitted with un-grounded two-prong outlets. Only the kitchen circuits were retrofitted as they see high usage.
I bought one for fun too, it's still the cheapect one in 2021 at less than £3 to your door, the heating element for this generic 30w iron is £1 on it's own and it fits a few different el-cheapos. The screw in the handle hilt gets bloody hot but I worked round it by putting a different one in it and then adding strain relief and a new better and longer cable, no earth but I used it for a day or two, also The metal part that holds the tip is sheet steel and curved to fit and within a day it had opened up, strange how you HAVE to mod Chinese crap like this just to get it a bit safer to use, great video Clive.
Huh, it is strange how often I find stuff on your channel that I have at home :) I have the same soldering iron, but blue. Never used it. Now I'm pretty sure It'll go in the dustbin. Regards from Bulgaria :)
I'm surprised you haven't taken one of these apart before.
It is standard practice to avoid soldering heating filaments, heat can melt/evaporate/oxidise lead which is no good electrically or health wise, lack of fibreglass sleeves on the joints is however an issue.
The mica is plastic like because it's coated with wax (usually paraffin), it makes the mica workable and less fragile, on first heating wax will evaporate, hence often these kind of heaters do smoke a bit on the first run.
Mica also does not deteriorate under
I have an identical looking one in blue, in which the wire was indeed zigzagged around the strain relief thing as you thought it should be. Also the wire is crimped on to on terminals attached to the black plastic piece and heat-shrunk. Gotten that nearly 15 years ago in a dollar store like thing in France, served me well until I gotten a proper thing recently.
wow love that enormous meter display
I picked up an iron similar to this, the handle looked a bit nicer though and it was £4. I got it as a challenge.
I had to use it to build a power supply from scratch, then build a soldering station using a wacky knock off 908 handle then use that to make a full blown re-work station. A 3 in One using an old computer case. It was a fun project though I will never ever ever use a cheap iron again.
Having seen the inside of that one now, I am really glad I didn't open mine up.
Interesting video, but I think you missed a trick there Clive.... element to metal housing resistance. That would have been my first test. Keep em coming!
Take it to bits! Never heard that one before, I like it
Does anyone else find themselves watching Clive almost entirely for his accent? I'm from herts down near London but my god I could listen to him all day and I'm only vaguely interesting in electronics. It was one of the main reasons I started watching Scott Manley, though I do have quite an interest in the subject matter in that case.
Bought a cheap iron myself. Probably should serve as a heads-up to people about cheap irons. Mine had a ground pin on the plug, but when I opened the plug, the ground pin wasn't actually connected to anything; horrible.
Inside the plug was also a 13A fuse. A 13A fuse on a 40W device... scary stuff.
I bought one here in America for $1.00 at a dollar store. It's built the same way as this one here, it takes about 2-3 minutes to heat up enough to melt solder and I use it as my go to when I'm doing desolder Work. So far it's worked well.
Ah the irony, the soldering iron wires aren't soldered
Hey Clive, found your vids recently and I'm really enjoying them.
I live in Switzerland and relative frequently travel to the UK, but have always been too cheap/lazy to buy enough adapters, so have always just shoved the swiss two-prong plugs (edit: euro-plugs) into the British sockets after pushing something thin and non-conductive into the earth to disable those little safety blockers (while the socket is off and removing it once the plug is in, of course). I have never had any problems with this, but have been wondering if it safe to do or not. (Of course it isn't "safe", but is it safe enough?)
I brought the same iron out of curiosity and for giggles. How they manage to make, ship and make a profit on that is bewildering to me.
It was dead on arrival, I didn't bother taking it apart.
I bought a vaguely better 60 watt soldering iron from Banggood, it too wasn't earthed. It's an easy enough job to do an earth though.
Thanks for these reviews, they are helpful to us occasional hobbyists when we choose tools to use. 👍🏼👍🏼
Had the same thing, broke really fast, got it for 2-3$ I mean what can you expect at that price, but now I got a more expensive one, came with warranty, should've done that in the first place and save me some time lol. Lesson learned.
Same here... wasted my money meh
i had a blue one just like this that i had used a few times and one day i came upon it and decided to see if it still worked. it broke like Clive's did, but i had it plugged in so there was a pop and some sparks. i keep the remnants as a reminder.
A soldering iron with no soldering in it, brilliant.
0:43 Look, the eBay ad picture even shows the wires broken off. lol!
seeing you touch the metal fills me with dread every time because I expect to get burnt
I took my cheap Chinese glue gun apart, it had the same weird plastic like heating elements wrapped by nicrome wire. Most of the world, not the UK, don´t use a ground wire at all, it is done through the neutral mains wire and the electrical pole in the street provide the earth connection, more economical that way. Even if this iron was to short out it would melt and break apart the thin nicrome wire inside long before that thick insulated plastic handle would even begin to get warm.
I've used these a thousand times and have never had a problem other than the tips corroding really fast with daily use. The ones here in the States are $1 and have a black handle. Rated at 30w/110v
I've never seen an earthed soldering iron in stores over here in Brazil, that includes brand names, knock offs, government safety agency approved (Inmetro stamp)... So, I wouldn't miss what I never even though existed.
this is a prime example for why radioshack went bankrupt. they sold at least 4 identical models of this soldering iron, starting at 12$ for a 10 watt one. the literal only difference, is they had a hard piece of plastic clamping the power cord in place.
This looks better at first than the one I got in the mid 2017 from eBay for $2, was soldering and the wires came out just like this but they had put one tiny spot of solder on the very thin tip of the wires no stripped wires etc
O.o The cheapest (
The resistance of metal wires actually goes up when they heat up. That iron is nowhere near the claimed 40 W.
The TCR of nichrome (typical heating wire) is about 400 ppm/K. Heating it up to about 400°C would increase the the resistance by 160000 ppm which is 16%. That 1.898 kΩ would then be 2.20 kΩ at temperature, so the actual power is 230²/2.20 kΩ = 24 W.
+piast99 science.
Soldering irons are simple. You buy an Antex and a large bit or a small bit, depending on the sort of thing you are soldering and then you enjoy a trouble-free life.
And don't file the bits, they are usually nickel plated to stop them reacting with the solder and eroding.
I'm glad you did this, because I have a question. A friend of mine got a desolderring pump that looks similar to this but it is for 220 volts. Is it possible to convert it to 100??
Ive always admired your screw driver!
I was shocked when a friend told me this is the best soldering gun he has been using for last 30 years without any trouble and he bought it for about 50 cents. So we bought some and they all work very good... perfect, only issue is no earth....I am actually looking for a gun that load or store all solder, flux in it so that I could fire on joints with single hands easily.
soldering irons generally use insulated nichrome/possibly kanthol right? do you know if there is a decent source of insulated heating wire?
What's the cheapest soldering iron you would recommend for basic uses? I have some random DIY projects to do and hot glue is not cutting it...
now you need to tell us whats the best size solder to use as there are so many .also like to say I love the vid with the clock kit made me send for one to try.
So, basically, a death trap. Goes to show you get what you pay for. Also, so much for safety standards. We NEED the Kitemark system back again.
I have the same one and it really is cheap like 1 to 2 USD, but it works, so i modified it and used my glue gun wire ( Has 2 insulation so it's safe to touch and upon reconnecting, i used heatshrink rather than an electrical tape which is whats used in the iron, also i added a 3A 250V switch on the wire, I'm using it now with no problem.
The cheap soldering iron itself is dangerous so modify it safely at no ones risk, stay safe.
the irony of unsoldered wires on a soldering iron
Well, I actually use that kind of soldering iron 5yrs ago when I was 16yrs old. We where broke and my parents weren't there to support my hobby. Everyday, I always go out to ask people for spare change, usually got $2 throughout the whole day. I always dreamed of having a expensive( expensive for me is $30) soldering iron.
So is there something complicated about adding an earth connection and would it be an OK soldering iron if you did?
Good video and like most I've looked at these solder irons and thought .... I would never buy one of those ... but then I think they may have a good usage to say for example make solders on cables, join connectors and the like. In those situations we do not need the latest and greatest thermal controlled solder station. We actually may save some money by not deteriorating the our more expensive solder stations tips that cost Way more then this cheap iron :)
I had one just out of interest, the thing only lasted a few minutes as the plastic holding the heating element melted and it fell apart. Thank you for exposing these dangerous electrical devices your doing a good service to many people.
So that's a 'BUY' on this one despite its little tiny small faults:
1. Mains connection not anchored (illegal) and unsafe.
2. False claim of power capability (fraud).
3. Element insulation possibly unsafe.
Many Asian countries only have two pin sockets, so they would never even consider an Earth...where would you plug it into? 99P, couldn't complain if it does the job. I have bought half a dozen Thai made irons from local shops, rated from anywhere between 40 and 120W, not one of them has managed to generate enough heat to even melt the solder. The Chinese one you reviewed does actually work and tins anything, I bought the 70 Watt version.
I bought something similar once for like £3.
I plugged it in, It sparked and burst into flames.
Money well spent ^^
Hahahaha I just bought exactly this iron today in a local shop. I put it into an electric socket it sparked and cought on fire. Now I'm looking for a better one on the internet and found this video. You were lucky, that you didn't try to use it.
We used to use this exact model at my school, i had no idea they were so cheap.
still using my trusty inherited from grandad ex ministry of defence Adcola iron dated 1960!!
I have a friend that bought one of these and it works pretty good. I wouldn't use such a piece of junk nowdays but this is the kind of style of soldering irons that I started with... I tried to rewind one of these to make it work on a 3.7V 18650 cell but have any succes with it so I gave up.
Bog standard heating element, made the same way in many applications. Bet the mandrel is steel as well, not thermally conductive copper. No earth means they save on the more expensive 3 plated steel core cable and extra plastic in the sheath and moulded plug. Have used similar unearthed ones for many years for non critical applications where you need to solder a few wires, and there is no need to pull out the big soldering gun.
do you have video about the expensive one? i would love to watch it. really help me to learning what's the diffrence. and thank you for this and the other video.
i would just use a old soldering iron from the 1990s and i do use such a old soldering iron works great no broblem's with it
Interesting you talk about the grounded tip, I have only seen 1 iron like that and it was a very specialty one my late Grandfather had...everything I have seen for sale is just 2-prong.
I had pretty much the same happen to this cheap "desoldering tools" (your normal plunger solder sucker + a hollow heated tip). The wires were just losely twisted together and i think I may get 4 or 5 more uses out of it before it melts itself.
I've seen soldering irons in a dollar store. It wasn't a chain but an independent one. I was really surprised because for a dollar something like that didn't sound very safe.
When your own soldering iron is cheaper than his cheap one😂
A couple of years ago I worked as a supply teacher in a local school. To save money the head of Technology (I am a technology teacher myself) bought a load of cheap soldering irons which looked like the Maplin type visually. I had to try and teach soldering to children with irons that just did not get hot enough to melt the solder. Not the best situation with a group of excited teenagers. Cheap is not worth buying. In the end he threw them away and bought decent ones.
+Bill Fox teachers gotta teach
You make very interesting videos
Grounding isn't common on soldering irons, at least not in my part of the world. None of the old Radio Shack irons my dad had (nor a newer one I bought from its successor store) were grounded. I have a big 80W Weller that isn't grounded either, although that one isn't meant for electronics (stained glass, electrical, and maybe plumbing). On the other hand, both my WP25 iron and WESD51 station are grounded. It makes a lot of sense the way you've explained it, but I never thought of it as a safety thing until now, only in the context of ESD.
I have one of these pieces of crap, and as a matter of fact, I've gone through quite a few of them. It does have stress relief but it's not grounded. Inside, it's built similarly to this one, the wires are just twisted together.
Had to get one since no local stores in my city sell soldering stations and I didn't have the time to take a five hour trip to the capital city just to buy one. So far it hasn't failed me, and I haven't damaged any electronic components yet due to the lack of earthing, but it's still pretty bad. As for the old ones, let's just say the tip eventually broke. It literally snapped.
No freakin' way - this thing is a Chinese death stick-!! I had some cheap irons many years ago here in the US but ive never seen anything built quite as sketchy as this thing. Worth a million times its weight in lawsuits-!
Actuallly has one of these, 60w performs strangely good.
One can always help Ebay closing down scam sellers /sellers of complete rubbish by reporting a description that didnt match the product. I mean you were supposed to get a soldering iron right? Not an orange piece of plastic tubing, a cable and a piece of metal..
I bought a couple of these on separate occasions. They work as advertised. If you want quality product, don't be stingy and pony up more than 99p.
Ola K my ebay £2 soldering iron is still working well after several years. granted it was double the price!