Chasing the TRX520 on my YFZ450R!
Vložit
- čas přidán 22. 06. 2024
- Today's ride takes us to our stomping grounds at the Appleton OHV Park in west central Minnesota. My friends Chad and Ted met me for a day of riding and we had primo conditions at the park. As always Chad was on the gas on his 450r and I had a blast trying to keep up!
Our Website petehager.com/
World Drag News Channel / @worldsanddragnews
Sand wars clip • 2022 ATV Sand Wars
2020 Yamaha YFZ450R
Custom Graphics by Spider Graphix www.spider-graphix.com/
Urmosi 720 SBC Clamps petehager.com/products/copy-o...
Precision Elite Steering Stabilizer petehager.com/products/precis...
Rossier R5 Full Exhaust System petehager.com/products/rossie...
Urmosi Factory Edition Throttle petehager.com/products/urmosi...
Houser Pro Bounce Nerf Bars petehager.com/products/houser...
DRW Belly Skid petehager.com/products/drw-fu...
DRW Sprocket Guard petehager.com/products/drw-re...
DRW Rotor Guard petehager.com/products/drw-ro...
DRW Swing Arm Plate petehager.com/products/drw-sw...
DRW Case Saver petehager.com/products/drw-ca...
DRW Chain Slide petehager.com/products/drw-ch...
Revalved Front Shocks by Rocket Ron www.rocketronracing.com/
Pro Taper Contour Bars www.rockymountainatvmc.com/pa...
ODI Lock On Grips www.rockymountainatvmc.com/pa...
Fuel Customs Intake W/box
Fourwerx Custom Seat Cover
Fourwerx Carbon Bumper insert
Factory 43 MX Bumper
Vortex ECU
Chapters
0:00-0:34 Intro
0:35-1:22 Loading Up
1:23-1:39 Travel Timelapse
1:40-2:26 Pre Ride Announcements
2:27-3:17 Pre Ride Walk Arounds
3:18-5:34 Ride Start
5:35-5:56 Ride Break
5:57-6:21 Tire Pump Up
6:22-7:40 Middle Trails
7:41-8:50 Heading North
8:51-9:05 Ride Break
9:06-11:42 Helmet Cam Returns
11:43-12:35 Ride Break
12:36-14:57 Parking Lot Return
14:58-16:14 Loading Up
16:15-18:12 Outro
18:13-19:16 Quad Wash Sequence
Music sourced through www.epidemicsound.com/
Timelapse Music "Yhello" by Lofive
Walk Around/Drone Music "Yhello" by Lofive
Walk Around 2 Music "Like It or Love It (Instrumental Version)" by Iso Indies
Quad Wash Outro Music "Infinite Night Road" by ELFL
Camera Gear-
Gopro Hero 11 amzn.to/3G6JoBI
Media Mod Link amzn.to/40SdBwl
Dual battery Charger Link amzn.to/40r5dE0
Motovlog Mic Purple Panda DISCOUNT LINK www.purplepandastore.com/prod...
Drone DJI Mini 3 Pro amzn.to/3os3hxf
3rd Person Filmed with Sony A6000 amzn.to/2XoVfWD
3rd Person Mic-Sony Zoom Microphone amzn.to/2Xtv6Wp
3rd Person Wind Muff- amzn.to/2x5Lluf
GoPro Hero 7 amzn.to/2MHvxVl
*Must purchase GoPro adapter to run microphone on HERO7* amzn.to/2SjdM3O
Follow Me On:
Instagram- / pete.hager
Facebook- / pete-hager-media-21519...
Strava- / strava
Links in the description are typically affiliate links. If you click on one and purchase, we’ll receive a small commission. This helps support our channel and allows us to continue making videos like this one! As always thank you very much for your support!
#savesportquads - Auta a dopravní prostředky
Love that 450. Watching you and several others has inspired me to begin my hunt to get back on the trails again after so many years. #missingmyoldbanshee
You should race the ironman gncc on October 21st. It would be awesome to see you rip up that course!
Pete is content creator, not a one off xc racer. I mean no disrespect but if he wanted to race, he would be all in not just a one off race with way too many racers.
Sad to see the YFZ go. You're the reason I bought mine! Haha but either way, looking forward for what comes next 🤙🏽
Felt good to get back out there again, but I sure paid for it the next day at work lol. Can't wait to rip it at the dunes this week. Awesome video, as always, Pete
I assume that's you on the Honda. Thing is sick man! I would love to hear some more info on the build. I admire that thing! #SaveSportQuads
It's stock lol
@@cclarkie1they are all stock when they are really fast
Good riding and very nice bike. I have a 05 trx with the 501 kit in it. I also have a 523 ice cube kit that came with it.
Makes me wish I still had my LTR450. Loved that bike. Soon though I'll have another or maybe yammy 450. Sick vid 🤙.
Killer day, love it Pete!!
Another great video man🤙🏻 love seeing that ds650 out too!
Really good videos as usual man! I’ve got the same big 3 setup on my 2020 YFZ as well. Definitely always love your videos with it in it!!
Pete on a Banshee sounds awesomeee, excited to see what you get next!
Looking forward to the next vid 💯
love the edit. this place is dope
Man i wish i had that 450 that thing is clean man keep up the good work
old school, love it Chad!!
Me, or the 4-wheeler, we are both old school lol
Great video, glad you had a safe trip and ride 🤙
me too
Mannnn Pete the Yfz is you cant get rid of it the thing is amazing the first video i ever watched if you was the day you picked it up you are a true inspiration to the sport atv world you are a big reason why I am going to start racing MX i have a 2000 Yamaha Banshee that me and my dad and grandpa are working on it over the offseason i already have 3 sponsorships by companies I know you are a true inspiration man 💯💯
Thanks for the kind words man! I've had a lot of fun on the YFZ but Polaris is loaning me a couple machines over the winter and I know it'll be lower on priority list. Plus I'm running out space in my garage lol I'm pretty confident I'll get another one someday!Good luck racing next season🤘😬
I got a trx450r now all I need is the yfz that thing is so nice great video brother as always!
Happy to see you still have the Cool Ranch Trailblazer Pete!!! You have a fun looking collection!
Thanks man! The Cool Ranch is for sale actually. I wish I could keep collecting more quads but I don’t ride them all enough so I may have to part ways with a couple more 😅
I know the feeling. Got a small collection myself. I tend to ride the DS450 and the Warrior more then the others lol 😆
Great video fam wish I could be there with you all stay blessed
Awesome video, place looks like a great spot to rip🤘
Great video Pete! I need to get on your level of editing!
can you go to the dunes again :D
nice ridin boyz
So bummed I didn't get to see you guys out there. My brother and I stayed in Ortonville that weekend and rode Appleton both Friday and Saturday. Both of us were pretty bushwhacked come Sunday morning so we drove home instead of going back for a third day. Buddy of mine sent me a pic from your Instagram (I'm assuming?) On Sunday and asked if we were there with you.
Dang that’s a bummer you missed us. Yeah we were up on that Sunday for the afternoon
Dude! Your yfz is awesome 👌 👏 some day, I'm gonna get me 1 ❤ love your videos,you make editing look easy lol but I know it's not 😊
And someday, I wanna try the R5 exhaust on my 416ex
Come on Pete gotta get a spray in bed liner on that Ram!!!
I would be open to a bed mat but I’m not that into those spray in liners 😅
Gonna be sad for the 450 to go fs. But its an opportunity for something new! I cant lie I was hoping to suggest a ktm505sx quad but once I heard two stroke that suggestion was immediately shot down haha. But hey a Banshee or LT500R would be sick too!
I like your ideas! I'm pretty interested in the Banshee 👀
How do you get your tail gate to close Pete...
Pete what exhaust set up do you have on your pick up it sounds good 👀👂🏽
Thanks man! It has a muffler and resonator delete. I also had them make the rear piping 3 inches and then they welded on 5 inch tips which actually changed the tone a bit
@@PeteHager she sounds good man 💪🏽
fk yeah!!!!
Wats up pH became a bigger fan when u got the YFZ 450r. I was curious the DRW case saver. I want 1> does it bolt str8 up to a 2021 YFZ 450R or did u have to do a lil trimming?
All my DRW stuff went on my 450 without any trimming. I did have to trim some case savers on our 400ex and my raptor though
@@PeteHager ok thanks for info. My Z400 case saver needed trimming an I didn't have the tools to do it. So 2 years later it's still sitting . Thanks again I'll order from your website to get the 2021 YFZ 450r DRW case saver.
Your best bet for trimming is to use a sharp blade. Any power tools will just melt the poly material. I normally just use a utility knife to widdle material away 👍
Sick waist bag dude!! Where can I get one ?
I bought it off Rocky Mountain. It’s Fox brand. It works pretty well when I don’t want to ride with a backpack but still bring a few items with me like batteries, tools, and my phone 👌
Looking like Ashton C at 5:03 there from his latest video lol
lol I’ll have to check that one out 😅
What would you suggest more for trail riding? the YFZ450 or the Raptor 700? I am only asking because you seem really comfortable on both.
Hmm the Raptor is definitely going to be better suited for all trail riding. The YFZ is super fun and can still do it but if you're putzing around going slow it's gonna get hot and they don't run the smoothest at low RPM.
Where is this place your riding? Is it public or private land?
Appleton MN. Public park
If you sell the YFZ I reeeeeally hope you’re looking for a 250R😂
I love the 250r’s buttttt I kinda want a banshee 😆
I'd drive all the way from SC to pick that quad up in person. just saying lol
lol well I have one person interested in it so far. It’s in Minnesota so if you really want it we can discuss logistics if you like 😊
Dam that Honda eats Pete’s wee yam for breakfast.
When are you going to get your hands on a TRX250R?
I have 2 videos on the 250r. They should be in my test ride playlist. One was sabo’s before he did his recent upgrades
@@PeteHager I know, I’ve seen them. You also mentioned adding one to your stable, I’m just waiting for that day lol. I’m a fan of the old 2-strokes, reminds me of riding when I was a child. 2-strokes were the weapon of choice for anybody looking to go fast back then. I know 4-stroke technology has surpassed the old smokers, but with 2-strokes rising in popularity again some aftermarket companies are stepping up research and it’s just a personal belief that 2-stroke technology MIGHT catch back up and MAYBE we will start seeing them in pro racing once again…. Just a personal theory.
But hey, if you ever decide to ride in Tennessee I am close to Turkey Bay. It’s like 2,500 acres of trails. I’m not far from it but I’ve never been there, I’ve always ridden on private land. I’d like to go sometime but I don’t have many people to ride with anymore. Most my friends grew up and had kids, sold their toys, and fell off the map. Let me know on Facebook if you ever want to hit Turkey Bay, I’ll go ride with you guys.
@@christopheravery5808 I definitely like the nostalgia of the older 2 strokes. A 250r would be a ton of fun but I can’t help but want a banshee.. I know they don’t handle nearly as well but I’ve always loved listening to them and it would be fun to battle one on the trails! (I think😅😆)
@@PeteHager I’ve had a few banshees over the years. I’m hey can definitely use better shocks right off the bat. Anything more than an exhaust, jetting, and I take is too much for typical woods riding though. You can find a banshee with stock cylinders with the exhaust, filter, and jetting already done all over the place, they’ve made many of them over the years for sure. From there just swap the shocks and then focus on stuff like skid plates and nerf bars. They are fine on the trail if you keep them simple, but you are right, they handle like crap typically. Laeger made a Protrax chassis that significantly improved the handling though, so if you have cash to burn and can find one then I recommend it…. Even if it’s just the frame, swing arm, and A-arms. You can source the rest of the parts later
@@PeteHager I messaged you earlier in the year about an TRX250R XC build I’m doing and that I’d like you to take it for a rip sometime to get your thought on it. Didn’t get to finish it this year, unfortunately I had $30,000 worth of diesel truck repairs to do for my business so it hurt my pockets pretty hard, but as soon as I collect the other half of the parts I need I’ll be assembling it on a CZcams channel. I’m planning on doing builds for myself and my daughters and then taking them to the races to show people what it takes to go from the build to the finish line, all costs associated including fees to enter races and the fuel to get to the races. I grew up with riding and racing, and I want to show people that you don’t have to be rich to race quads (although it makes it easier). My goal is to grow the sport at the tracks because racing is what sparks manufacturers to Innovate and create, and that brings us new sport quads. I feel like if the race scene starts booming again then we might see a 3rd wave of pure sport ATVs.
Hi pete
Pete you should get some fox or Elka shocks they are life saving
520cc trx? You must’ve made a mistake in the title lmao piston through the roof right there!
You can make it 520 no problem
@@johnbruzzi4381 I’ve seen/heard about 460s that’s pretty much it my cousin had one it lasted close to a year which isn’t bad but don’t think 520 would be your best bet
My first piston went 150 hrs. And I freshened it up in the next 100 hrs with a new piston and resurface the jug. I have had very good luck with this engine considering its 64hp and 42 torque at the wheels
@@cclarkie1 left a bit of context out, do you mean with your experience with a 520cc engine?
@@user-hq7sp1zu8g depends on what riding you do
awesome
selling the 450??? i dunno man!
I know.. it’s a hard decision 🥺
1
Jesus loves you
Send it pete!!!
Love your videos man @petehager recently just brought your raptor designed t shirt
Thanks for repping our merch! 😬🤘