Mystery of the Sticky Roller Door: Solved! Quick Fix for Sticking when closing [119]

Is your roller door acting up? Don't call a repair person just yet! In this video, we'll tackle a sticky situation (pun intended) and show you a simple DIY fix to get your door rolling smoothly again. Sneak peek: it's easier than you think!
Please subscribe to my channel, motivates me to make more videos ( it’s free) tinyurl.com/garagedoorsYT
#rollers #rollershutter #diy #fixit #howto #maintenance #doors #homesteading #lifehack #quickfix #easyrepair #diyproject #homeimprovement #handyman #workshop #problemsolved #satisfying #rollers #rollershutterfix #diylife

[@Mick_Au]

Another door fixed by the king!

[@rollerdoors]

🤩💪🏻

[@Justin-bn2ob]

Thanks mate, I need to try this tomorrow as mine is all the way up but ballooned!

[@rollerdoors]

Awesome Good luck! 🤞🏻 and stay safe

[@annettecrofts6845]

Many thanks

[@WestCoastMountainBiker]

Dude. Thanks a lot. I've been searching rollerdoor videos and info on the internet for some time. I didn't realize that my door had a tension issue. Sorted that out thanks to this video. Now I am batteling with a controller for the motor that only lifts up... and doesn't want to lower the door. Limits checked. They look like they work. So my thought was reprogram a remote. Now my remote is not having any effect.

[@rollerdoors]

You’re welcome!! One direction could mean a faulty limit switch or plug to the box

[@WestCoastMountainBiker]

@@rollerdoors hey. Thanks for the reply. It looks like one of the relays is the issue. I figured it out by tapping on it with a screwdriver. It seems like it works for a while. And if it doesn't giving the relay a tap does the trick again. Would I be able to replace the relay with a soldering job? Or should I think of relacing the entire control box?
The remote issue seems like the receiver needs the be replaced.

[@zacj63]

One of the best videos mate, l have same problem but my door manual doesn’t have motor can I follow this video our its different way to fix manual roller garage door?

[@rollerdoors]

Thanks. Yes, absolutely 👍🏻 but it probably requires some spring tension I’ve got a video on that too

[@zacj63]

Very helpful video mate👍
Is lt always the left side to retention ?

[@rollerdoors]

Cheers. Any side is ok but always pull down on the shaft.

[@zacj63]

Thanks mate much appreciated 👍👍

[@rollerdoors]

It's gonna happen! Your garage door, gate, or window shutters will need fixing someday. Prepare now with my DIY video tips! Subscribe and join the community!
Plus it motivates me to make more videos (it’s free) tinyurl.com/garagedoorsYT

[@annettecrofts6845]

Hi Can you help I have a reverse roll roll a door that has lost its tension and has ballooned, It is currently rolled up do I need to release and let the door down before re-tensioning?

[@rollerdoors]

Best to do it rolled up.

[@Prince3zoz]

Thanks you the best 🫡👌

[@rollerdoors]

💪🏻🤩