8 Must-Know Secrets For Next-Level Woodworking!
Vložit
- čas přidán 29. 04. 2024
- Woodworking Mistakes: How to Fix Them (Fold-Down Desk Build) Join me as I troubleshoot common woodworking problems like mis-cuts, marquetry errors, veneer issues, and more. Perfect for beginners and experienced woodworkers alike!
Enjoy the video, and I'd love it if you would consider subscribing to my channel.
Get Wind & Fire Woodwork plans and merch here: www.windfirewoodwork.com/store
Links to products used in this video (Amazon links are affiliate links. They help support the channel and don't cost you anything extra):
-Makita Miter Saw: amzlink.to/az09mGhQZud5Y
-Miter Saw Blade: amzlink.to/az0mPqM1hafFv
-Woodpeckers combo track: amzlink.to/az0EN9UOl096k
-Dewalt Thickness Planer: amzlink.to/az0hYNAMhtvQM
-iGaging 4" Stainless Steel Bench Square: amzlink.to/az0t4vgiQM5Js
-Incra Miter Guage: amzlink.to/az02eFMKKIDut
-Jorgensen squeeze clamps: amzlink.to/az0fTZa7p3hjW
-Freud Dado Stack: amzlink.to/az0JqqYVmPCXk
-iGaging Setup Block Set: amzlink.to/az0LuECgYie2o
-Microjig Grr-Ripper2 Go Pushblock: amzlink.to/az0Na9lFF3ZYz
-Magswitch Featherboard Pro: amzlink.to/az00suhDbCAZV
-Bessey strap clamp: amzlink.to/az0vSLotgep59
-iGaging Double Square: amzlink.to/az0cRjTyRvPYd
-Pentel Graphgear Mechanical Pencil (0.9mm): amzlink.to/az0ihqO0olRp3
-Fastcap Tape Measure: amzlink.to/az0cyU5chfBa1
-Makita Track Saw and Tracks: amzlink.to/az0CFplvhtR4E
-Microjig Grr-Ripper Pushblock: amzlink.to/az0I3StS8lUXZ
-RZ Dust Mask: amzlink.to/az0sVE80jM6kV
-Kreg Precision Bandsaw Fence: amzlink.to/az0p6mZTk5ymJ
-ISOTunes bluetooth hearing protection: amzlink.to/az0usK7scNPgI
-XFasten Double Stick Tape: amzlink.to/az0e2ez9ErTvN
-Acmer P2 40W diode laser: acmerlaser.com/?ref=740l2pyv
-Narex Richter Chisel Set: amzlink.to/az0UQqVBssjoM
-Bosch Dust Extractor: amzlink.to/az0zYAeurewWG
-Kreg 720 Pocket Hole Jig: amzlink.to/az0xfPlyzgw50
-Edge Banding "Bandy" Clamps: amzlink.to/az0sViQzUQlLs
-Miter Saw Laser Attachment: amzlink.to/az0zSkk4rvFzM
-Dewalt Cordless Router: amzlink.to/az0oP8dLBDauw
-Osmo Top Oil: amzlink.to/az0IXbJW4r7dV
-Osmo Polyx Hardwax oil Satin Clear: amzlink.to/az0AdKSLr11Rq
-Ryobi cordless 18ga brad nailer: amzlink.to/az0KZXd97Jfmm
-Ryobi cordless 23ga pin nailer: amzlink.to/az0SDu7qkoEc5
-Bessey Parallel Clamps: amzlink.to/az0U7OtD8z1C2
-Bessey pipe clamp heads: amzlink.to/az0xZFVHigDO8
___
Jesus loves and accepts you just as you are, but he loves you too much to leave you there. Find out more about following him here: abundantsprings.church/about#...
If you're curious about what I do for work, check out my church in Pincher Creek, AB: www.abundantsprings.church. We'd love to chat with you about faith and help you get plugged into a church, wherever you might live! - Jak na to + styl
A-z and sometimes detour 😂. Love the video.
😂 I hear ya! Thanks!
Wood art that is functional. Great work! I don't have any tool in my shop as accurate as yours, and I'm shaky. Normally I'm A to Z. I aim for perfect and then hope for poor eyesight.
👍 Thanks for watching! Accurate tools are helpful, but the craftsperson can overcome a lot!
Enjoyed the video! Loved the struggle.
Glad you enjoyed it!
A to Z, the plan is all in my head, but i follow it!
Awesome! 👍
Detour, great video the cabinet turned out amazing
Thanks so much! 👍
Detour Woodworking is a hobby I enjoy and I do things in a rather serendipitous manner. I just do what I feel like doing when I want to do it.
Great way to do it! Gotta relax and enjoy the process! 👍
A-Z for me. I enjoy working through my builds in the order planned. Sometimes order of operations is really important (like you adding finish to the insides of the cubbies before attaching them)!
Very true, planning ahead for those sorts of things is important! 👍
Detour! Great video and really cool project. Thanks for sharing it!
Thanks for watching! 👍
That's an awesome piece of work!!! An I'm a detour guy lol. I've tried going a -z but never do lol. Peace
Thank you! Haha, I always imagine I’ll go A to Z too. 👍
A-Z if I have a plan. However without a plan, which is usually the case, I tend to ad lib and detour, back up, or change directions completely.
Nice folding desk. The inlay is beautiful. I hope the strut screws continue to hold up to the weight of people leaning on the desk top.
Thanks! 👍 I’m hoping they’ll hold on. I have a few less than ideal ideas how to reinforce it if they don’t.
Detour or A-Z...well, I'm more of a YYZ guy as a Rush fan.
It was a wonderful build, and refreshing to see a realistic take on how things go in the shop. Too many perfect woodworkers on CZcams these days. While we are on that subject, be a little easier on yourself. It is a hard lesson, and one I am just learning myself. Your original inlay looked good. If you don't point out such small errors, nobody else will notice. Before long, you won't remember them either. Then next time you try to do one, you'll improve rather than going for perfection from your first try. I've done a lot of segmentation and intarsia on scroll saws. Same basic skillset. Perfection just isn't realistic by hand.
Thanks for watching! 👍
It’s definitely difficult to know where the line of “good enough” is. Got there in the end though!
A-Z.
Those gas pistons and small screws are not weight bearing. This is a really great example of what not to do for a flip down desk.
Thanks for watching. They're working great so far 🤷🏻♂️
Squirrel! I mean detour! Seems I get halfway through a project, think of something else I want to build (or see a video on CZcams and have to build it) and work on that, and then come back to the original project.
Haha, yeah. I usually have a few builds going at the same time. Thanks for watching! 👍
Detour. My wife tells me I do that because I am ADHD and am not as task oriented as I probably ought to be.
Haha, as a parent of ADHD children, I hear ya! 👍
I would say detour, but that would assume there was a plan to deviate from in the first place.
😂 That's awesome! Sometimes no plan is the best plan! 👍
A-Z I'm ADHD!! HA HA!😂
Great videos 😊
😆 thanks 👍
At 1:14. Don't do that. It's fine to use your fence as a stop block, but before you cut have a firm grip on your workpiece you should push your fence away to remove any resistance.
Thanks for your concern. With the thin mitred edge against the fence and the mitre gauge on the right side of the blade, everything went very smoothly. But yes, there are situations where this would be a bad decision!
Blue tape works just as good or better than those band clamps, I've used those band clamps in the past, never cared for them. Blue painters tape is actually very strong and holds so well, give it a try. Blue not green lol.
Why blue over green? I find the green tape to be cheaper and to stretch more.
@@windfirewoodwork blue grips a bit better, the colors are to indicate stick strength (when painting) so blue will stick better with less stretch, green has more stretch but less stick, I'm not saying don't use green, but blue works better as a clamp imo.
Makes sense, thanks!
If you want to use your fence as a stop, you should have a block of wood attached to it, so the wood clears the fence during the cut.
That is a dangerous procedure using the fence alone as a stop and is incorrect.
I would point out that you have a _miter saw_ and can use it to cut...miters or 45*s
A-Z, Batch, Detour, Same Setup. It depends.
I hear you. I don't actually consider the fence all that dangerous as a stop in this case. The mitered edge is vary slim and the mitre gauge is on the same side of the blade. There isn't any offcut to get caught up here. When my mitre gauge is on the left side of the blade, I agree that there should be a block of wood on the fence. As for the mitre saw, I could...but I like my table saw better for these cuts. Thanks for watching! 👍
Both....Depends on the day! LOL
😆 fair 👍
👍
Detour
Right on! Thanks for watching! 👍
I know you said once not to long ago that you were a Pastor of a church is your ministry online?
Hey there, yes, we livestream our services here on CZcams under @abundantsprings
Detour
Right on 👍
Have you ever been mid-project and wished you would’ve run more A through Z?
Detour I can't just do one thing
haha, thanks for watching! 👍
Great job and vid! But who’s this Zed guy you keep referring to?
Didn't you know? Zed is the British Commonwealth's mascot! 😂