The shift knob is really slick. I like that idea a lot. One note for anyone who wants to do the PET braided wire loom, a good way to cut clean ends (like the factory cut) and prevent fraying completely is to cut it with a hot knife - that's typically what is recommended for that kind of loom. Burning the ends is definitely a good way to keep the fray from undoing the weave though.
@@DentedFenderGarage Electric knife - I think they have them for $20 or $30 at Harbor Freight, but they're also handy for cutting foam and other material.
I owned a Suzuki Carry (Kei) for several years. I loved it. BUT on two occasions, about two years apart, the water pump failed. On the first occasion, this lead to a blown head gasket. On the second occasion, I was able to detect the blown pump before any engine damage was done. I recommend you keep an eye on this component. Better still, replace the water pump you already have as soon as you have some time and energy, if you don't know how old it is. Cheers mate. ✌
If there is a hydraulic hose supply house near you , sometimes napa does it but anyway they have hose protector made of heavy duty nylon material , I think it would be perfect for tailgate chains
For the chains on the tailgate, you should try the rubber that they use on swing sets in parks and etc. You can also get it in green to match your style. Awesome vids btw! keep them coming.
I'm digging the shifter mod. My 06 Tacoma needs this. It has a junk shift knob that is loose & does not have threads. Stock Toyota Tacoma parts are much more difficult to find than expected.
When I made this video I had a Honda Ruckus scooter, a Puch Maxi moped, and a Yamaha QT50 no-ped in the shop. Since then I have sold the Puch but picked up half of another Ruckus for a project.
The shift knob is really slick. I like that idea a lot. One note for anyone who wants to do the PET braided wire loom, a good way to cut clean ends (like the factory cut) and prevent fraying completely is to cut it with a hot knife - that's typically what is recommended for that kind of loom. Burning the ends is definitely a good way to keep the fray from undoing the weave though.
Like a specialized electric knife or heating a knife? I thought that doing that might close the end.
@@DentedFenderGarage Electric knife - I think they have them for $20 or $30 at Harbor Freight, but they're also handy for cutting foam and other material.
I owned a Suzuki Carry (Kei) for several years. I loved it. BUT on two occasions, about two years apart, the water pump failed. On the first occasion, this lead to a blown head gasket. On the second occasion, I was able to detect the blown pump before any engine damage was done. I recommend you keep an eye on this component. Better still, replace the water pump you already have as soon as you have some time and energy, if you don't know how old it is. Cheers mate. ✌
Thank you.
That shifter solution was brilliant!
Thank you, I’m still quite fond of it. 😁
Nice rides! I got a red LX fox vert and a boosted CRX. Lookin at getting a ACTY thanks for all the good info!
Love these videos. Thanks for sharing the journey.
I appreciate that.
Arregato Sensei!!! Can't wait for mine!!!
Its coming along i love this series so much
Thank you.
For the chain on the bed you can use an old garden hose or engine water heater hose that autozone sells by the foot.
Water hose was too small and if you’ve been to Autozone lately their hose is $2 to $5 a foot. They’re ridiculous.
If there is a hydraulic hose supply house near you , sometimes napa does it but anyway they have hose protector made of heavy duty nylon material , I think it would be perfect for tailgate chains
For the chains on the tailgate, you should try the rubber that they use on swing sets in parks and etc. You can also get it in green to match your style. Awesome vids btw! keep them coming.
They sell this wire loom in green, the reason I stayed away from the rubber stuff is that it makes the chain so stiff. Thank you!
@@DentedFenderGarage that is true. They also fade over time. Good choice.
Could try cutting down a bicycle tube or a cut down pieces of garden hose
@UserName-pg8cv garden hose isn’t flexible enough and a bicycle tube outside of the tire deteriorates quickly. Ask me how I know. 😂
I'm digging the shifter mod. My 06 Tacoma needs this. It has a junk shift knob that is loose & does not have threads. Stock Toyota Tacoma parts are much more difficult to find than expected.
I’ve probably made more shift knobs than I’ve bought. Sometimes you know what you need better than some random company. I hope you make something.
Just a suggestion; you may want to buy a jis screwdriver.
Do some truck bed rust removal and screw replacement the rusty screws and chains were bothering me 😂
I’ll be cleaning the bed and doing bed liner at some point. I already bought the spray in bed liner kit.
@@DentedFenderGarage yaaaayyyy
I think I saw a moped at 5:15. Hmmm. :-)
When I made this video I had a Honda Ruckus scooter, a Puch Maxi moped, and a Yamaha QT50 no-ped in the shop. Since then I have sold the Puch but picked up half of another Ruckus for a project.
you can use some garden hose on those chains
Chain wouldn’t fit in garden hose, I tried.
Where did you find that steering wheel?
eBay. Really cheap too, search “flat dish steering wheel”
Why are they not converted into left hand drive?
It’s not required.