SEEMEE 200 Instruction Video
Vložit
- čas přidán 20. 04. 2020
- magicshine.com/products/magic...
Magicshine breaking through design conception, brings you real 360° visibility.
Powerful light output, let you be seen day and night.
Smart modes settings, make it all hands free.
-200 LM
-IPX6 waterproof rate
-2.5H-50H - Sport
Top! 👏🏼👏🏼
how to desactive smart mode thanks on your video i juste see the mode on tks
Mine seems to cycle through completely different modes. I get low, high, comet high, comet low, breath, and then it goes back to low. A double press doesn't do anything.. There's no quick flash mode which is what I really wanted. Also, it doesn't seem to have a motion sensor. I get the bliink to indicated it's in smart mode, but nothing happens with motion
any plans on making the brake sensor less sensitive as i feel that's the biggest con of what's potentially one of the best tail light option on the market.
If you tune the brake sensor, the light will have much improved battery life. as it stands the thing is just too sensitive and can't see how it got through testing in normal usage.
Thanks!
Thanks for your message.In fact, we have improved the brake mode of the New Seemee200 V2.0 and it can run longer than before in group ride mode.😊
Which mode will last longest? Much appreciated for the video
Hi there, if you use the low mode, it will last 12 hours.
where do I find mounts for this light?
Hi there, you can check for the mount via this link: magicshine.com/products/magicshine-seemee-200-180-100-mount-kit?_pos=4&_sid=737a2a4e4&_ss=r
Can you me how to switch between night and day modes?
Hold the power button for 5s until it flashes
that is to turn off the motion sensor for brake lights. Anyway to force Day mode on during the night?? to save battery
Compre una y se le metio el agua solo la use como 2 meses
Can turn off the lower one ? ( Second light)
Hi there, you can turn off the lower one.
@@MagicshineLights how to turn off lower light? i cant find in the manual
@@hisnameisziro Hi there, you should single click the button to turn it to lower power.
@@MagicshineLights The question was about the bottom light, not the low power mode. Please advise.
@@Jake-kl6xl 360°Tracing Light can't be turned off.
En que canton la vende
You can shop it on our official site: magicshine.com/products/magicshine-seemee200-tail-light?variant=33091975086217, we ship items globally.
Dear sir, you had shown in the video as switching off motion sensor but this doesn’t work.
Can u explain In detail pls.
To my understanding if motion sensor is switched off, will lights work without sensor?
Pls clarify.
Thanks,
Praveenn india
Hi there, please long press for 5 secons and when the light flashes, the motion sensor is off.
Yes, it still works without motion sensor.
Thanks for your reply,
After holding for 5sec
1. one time light blows constantly (as per your video motion sensor is on)
2. And other time light flashes (as per your video motion sensor is off)
I had done as per 2, when it starts to Flash I leave the button switch and the light gets switch off, and then again I switch ON the button but found light sensor in ON mode only.
Should I keep my hand pressed in switch after flash mode begins?
Should I restart light only after any time interval from sensor OFF?
Or should I keep in any preferred mode only?
Or after motion sensor is switched OFF, will bottom light will still be glowing as usual?
Pls guide me,
Sorry to disturb u again.
Thank u,
Praveenn
India
Check out PRAVEENN Erode on Strava www.strava.com/athletes/64042554
@@rppcpraveenn You should leave your hand after flash mode begins
@@rppcpraveenn You should leave your hand after flash mode begins
Honestly you folks can do much better job in putting a strong and user friendly manual. It sucks to turn off or disable the smart sensors. Your video is in't much help either. Pls take this into consideration :)
Hi there, thanks for your message. In fact, we have manual for the Seemee200. Please send an email to mkt1@magicshine.com for the manual.
yesterday I was riding in the rain for 3 or 4 hours and the light stopped working... even if the USB port was sealed the water penetrated inside and the light went off
Hi there, thanks for your feedback. You can send the product name and problem to our email service@magicshine.com, we will help resolve it ASAP!
@@MagicshineLights Hi, thanks for the quick response, now the light works fine.. I think the water inside has dried up.. have a great day
@@eMMy5230 Glad that you have resolved it and the light works normally. If you have any other issue, please feel free to contact us.
Cuanto valen disculpe mandeme el numero de cuenta
Hi, there. It's $44.99. You can buy it on our official site: magicshine.com/products/magicshine-seemee200-tail-light?variant=33091975086217
This is a great light but the instructions both in the manual and in this video are terrible.
Thanks for your feedback and we will improve it.
Still no fast flash especially irregular flash pattern which is by far the most attention getting. Once again I’ll pass on this new light from them. They almost got it right. I’m a long time bike messenger in nyc and I’ve tested out every flash pattern there is and cars give you the most distance and slow the most down with fast irregular flash patterns like with the Super flash Turbo by Planet Bike. They have the perfect flash pattern and brightness. The worst flash patterns where cars go fast by you and extremely close to you are constant on and also slow pulse. Fast slash is good but not to fast where it just looks like it’s constant on basically, the best is irregular flash pattern though.