Axes and Beyond
Vložit
- čas přidán 5. 09. 2016
- A brief description of several hand tools laying around my shop.
Watch Trees fall here • Thoughts on Cutting Wood
Most of these have uses specific to the timber industry of the Pacific Northwest. All of them are neat, useful, and authentic. I don't consider myself a craftsman with most of these tools - however I know enough to be dangerous and have spent a good amount of time using them.
Tools like this can be found all over the place and make great restoration projects. Remove the rust, build or buy a handle, and bring an old tool back to life.
Many thanks for all the nice comments, tips, and feedback. This channel has been a real source of pleasure for me, I'll keep doing my best to entertain.
Free Starter Blacksmithing Tool List bit.ly/blacksmithingtools
Free Guide - 100 Tools Every Craftsman Must Have bit.ly/EC100tools
Enjoy EC? Join Essential Craftsman Academy!
essentialcraftsman.com/academy
This is the best way to support Essential Craftsman and you get a LOT of perks as a bonus. Check it out.
Did you know we have a podcast?
Spotify spoti.fi/39ezy3d
Apple apple.co/33dbrJQ
Stitcher bit.ly/3NWy8sY
CZcams bit.ly/2n4HCLG
Second Channel (Podcast video, family, misc content) bit.ly/2n4HCLG
If you are going to hire a contractor for a big project PLEASE read our ebook first!
amzn.to/2v6qZ6j
T Shirts, Hoodies, and other Merch: bit.ly/2C7JFRv
Instagram / essentialcraftsman
Twitter / ecnatwad
Facebook / essentialcraftsman
Amazon Affiliate Links:
Amazon Store amzn.to/2pcUk8G
Makita 18v Impact amzn.to/2R9uamN
4 ft level amzn.to/389qsQa
Utility Knife amzn.to/2RjVRJL
Palm Nailer amzn.to/2LhvTTd
Spencer Tape amzn.to/2EQWxPy
Carpenter Bags amzn.to/2XeBaC1
Belt bit.ly/3MsdijV
Hammer amzn.to/31y4q66
Tape Measure amzn.to/2WYg23Q
Skil Saw amzn.to/2UcQyLi
Video Equipment and Misc.
Main Camera amzn.to/2WG9qSC
Secondary Camera amzn.to/32tS2Vx
Microphone (for narration from office) amzn.to/2WquPnM
Wireless Microphone amzn.to/2IGpNto
Other Wireless Microphone amzn.to/397VmxJ
Tripod amzn.to/2XOJcOd
GoPro amzn.to/3znHgTA
GoPro Tripod amzn.to/3aL8pFH
Battery Bucket amzn.to/3GVR9cV
ActionPacker amzn.to/2l7Msqv
Learn more about Essential Craftsman
www.essentialcraftsman.com
Buy a Knife From Cy Swan Here
www.greenvalleyforge.com
Thank you, be safe, and be grateful.
90% of what this man talks about has nothing to do with my trades, hvac & electrical work, but he is such an amazing teacher it doesn't even matter.
I gotta say, I just come back and watch this video every couple of months. It’s just so dang interesting.
It’s always nice to watch a fellow Christian. Thank you for the video
Thanks Brian!
having a neighbor with an extensive museum full of all kinds of traditional craftsmen tools, I see the value of it for the coming generations.
My grandpa had a few early weed eaters. He called it a grass whip. My grandpa passed away in 2012 at age 86 he retired from Western Electric in 1980 after 36 years of service he was in the Navy before that but he wasn't just a good man he was a great man who taught me a lot he taught me how to swing an axe and hit where you were aiming every time when I was 12 but that was after he made me cut down several trees with it and I remember him telling me he thinks he must have a beaver chewing trees down it only took me a few days to figure out he was talking about my not so good axe swinging skills or lack of. I sure miss him a lot but I know I will see him again someday. Thank you for your videos they are very unique and a big thanks to your father and grandfather for teaching you everything you know.
As a 72 year old woodworker who appreciates tools and their functions, this video has taught me much about tools of which I had no knowledge. Thanks very much.
Essential Craftsman my background is construction/carpentry. Specialized in framing ( with rigging axe ) after 3-4 years in the trade. Always disliked metal work but because of your channel I started stick welding and soon blacksmithing and I love it. You are a very a good teacher and I can watch your videos for hours. I figured as much but was happy to hear that you are Christian. God bless you and thank you for all your videos!
Every summer I'm high school I worked construction, this guy takes me back ...
I am glad you talked about the mushroom edges on the splitting wedge. I had a bad experience using a splitting wedge when a piece came off the wedge and shot into my lift thigh. The doctor thought I had been shot the way it entered my leg. I make I grind the edges of my wedges so this never happens again.
thats why you should use a wooden mallet only on things such as froes or wedges, the mallet takes the beating and your wedge doesnt form a lip to catch.
Yep. I still have a piece of a wedge in my left leg. Actually it was a "maul" head, or as we call them here in the Southeast a "Go-devil" head being used as a wedge struck with a 10lb hammer. Ever since then when I was about 15 years old, I've been somewhat more cautious about striking hardened steel with hardened steel.
Thanks for sharing your experience! The old-time term for that is “dressing” your tool to remove the mushroomed edge. Imagine if that chip had wound up in your eye instead of your leg!
I can't thank you enough for this particular video. You have brought me back to my own youth.
My Grandfather ( also a Christian man,also a carpenter)He treated me like a young man when he would take me out to the woods to wood and split it I did!
He wouldn't allow me to use the sharp axe. Only the splitting maul.
He was just worried I would Cut off my toes!
Anyway,thank you for bringing me back to my own youth
As an Axe collector and appraiser I loved this video...
This guy is underrated.
I didn't realize how much I appreciate my angle grinder until I saw you cut that cable.
Soooo....muccchhhhh....knowledge. Someone get this man a raise
I feel like im 4years behind just finding this channel especially this video.. Plumber who loves chopping wood.
The weed whip at 9;40, my Dad always called an "Idiot stick". It was because of the old times where convicts were employed in the mowing of roadside ditches.
I remember using one of those to knock down the weeds on the edge of my grandmother’s farm field about 40 years ago. I mentioned to her that they now made gas powered weed wackers which would make the job a whole lot easier. She was an old school child of the depression- “if you don’t want to use the weed whip than you can hand pull them instead”.
Grandpa called it a yo-yo.
Fishers of men! God bless you more sir! I am from the Philippines and I am so blessed by your videos! To God be the glory!
After almost 5 decades in both a military career and a follow-on career in federal land management involving significant wild land fire fighting, I’ve come to appreciate real quality tools -- particularly those made in America of years past. Your educational video once again proved the value of excellent CZcams! I found it while researching an original “made in the US” Craftsman axe no. 5037--with its original handle for which I paid only $20.00! Additionally, your video and tool demonstrations make me truly wonder at - and appreciate -- the dedication and hard work of those that built this nation. All the more amazing to watch as I reflect on the thousands and thousands of kids today sitting on their “sixes” playing videos. Bravo-Zulu, amigo....your video is most certainly a job well done!
your youtube channel is a hidden gem
Hi, I’ve written you in the past about you sharing all your knowledge. I’ve learned something every time I’ve watched your videos. You have a great presentation and explain things well and easy to understand. Thank you.
Beautiful tools. All which are fully functional. One of these days when you have the free time(ha ha) they would be a goldmine to clean up and restore and hang up in the shop for your grandson to start his wood working career.
I love tools, can't live without them.
True man!! That wire ax beat down was awesome!
The undercutter axe was used with the first chainsaws. Early saws with their primitive carburetors could only make horizontal cuts. A series of cuts was made, each a little shallower than the one below. The undercutter was used to chip out the remaining wood to form the mouth.
Boy oh boy! Who wouldn't like to spend an afternoon in that pole barn.
Respect your forefathers! They worked harder than you ever will.
The ammount of tools you have boggles my mind.
Man I love your channel, so much good stuff here, completely dig that family log stamp, cheers to your family. Memories, that weed whacker, my dad taught me how to mow the steep edge of our lot with that, looked as good as it was power mowed, when I complained he got out the real old school scythe with a short handle, no doubt I smiled and prayed for the guy to invent the weed eater . Pulaski super tool, worked as a hot shot, that thing is a real tool. Thank you again, grateful to Ave Canada for pointing me to your channel.
How lucky I was to grow up the son of an electrician and learn the happy tingle of electricity flowing through my fingers instead of the cold slice of steel cutting through my boot. Seems like you had the harder growing up.
what a collection! awesome. man your channel just keeps getting better when I discover these older episodes. thanks!
Thanks for watching!
WOW...Very well done got a good laugh on the comment after cutting the rope never knew of that hammer.
My favorite part was the fish log brand. Would like to say I’ve seen quite a few of your videos and based on your speech and work ethic I have had my suspicions that you were a Christian man for quite some time. Keep up the good work brother! It shows in how you carry yourself and the content you are producing. Excellent channel in every aspect.
Thank you for the name of the "WEED WHIP" (weedeater). I had a need for one just last week when I was not able to mow my lawn because of constant rain for ten days and an old push mower. Although I am now in a wheelchair I spent thousands of hours using a "weed whip" on the farm as a youngster. Evidently they are very difficult to buy new .
I am relatively new to your channel, but I love it. You are a natural teacher, and I love the flow of your videos. I could watch and learn from you and Wranglerstar all day. Truly, thank you for providing great content.
Pay it forward!
Love your family brand. ❤
Stumbled upon hour channel 2 days ago ...... WHY HAVE I NOT SEEN YOUR VIDS BEFORE NOW!!!!! you should be the bench Mark for all teachers for essential skills in life. Outstanding skills, knowledge, and talent. I'm honestly blown away by this channel. Thank you!!!
I just discovered your channel. I'm a blacksmith and found your video on your large gas forge. Having grown up on the farm and around many different and ancient tools, I appreciate your approach and commentary. I also very much appreciate your statement of faith. Keep forging!
One of my favourite and most useful tools is a very old and very large pickaxe. The ground here is clay soil with lots of large rocks, most modern garden tools are essentially useless in this stuff.
The pickaxe was my great grandfathers although we're not sure where he got it from, it looks like something the railways were built with. Still in use, bigger and heavier than anything I've seen for sale today. Many new handles over the years!
back in the old day's those old timers really had ther work cut out for them. makes me think of the time and raw talent it took to get things done. very cool that was a good watch for me .
I do like your videos.. Lots of details.. the hay Saw is called a "Mow Saw".. The top portion of the barn where hay was stored was called the " Hay Mow" and your description of use is spot on.. Not many people know what that tool is for.. Very nice..
The 8lb splitting maul at 4:10 is familiar to me, because my Dad had chronic back pain so he put me in charge of the fireplace and woodpile (teenage chores ... gotta love em). My tools of office were a hand saw, a bow saw, a single blade woodsman axe, a hatchet, lopping shears, an 8lb sledge hammer, and the splitting maul. I grew up calling it "The Whop Axe" though. 😁 I think I called it that because I frequently had to hit it with sledge hammer to finish splitting logs that were still a bit too green to split easily and cleanly. It is usually used in conjunction with steel splitting wedges, for larger logs. We had 4 of them in my house, growing up.
Dad had a chainsaw, but I never felt totally safe with them, so I stuck with my hand tools. Good times.
Still got all my fingers and toes.
Thank you.
Your videos are entertaining and you're a great teacher.
Pickeroon and the Peavey...most brilliant tools ever invented for wood...I grew up "half assing" firewood collection with family that dabbled enough to heat their homes...what I would have given for knowledge of the great Peavey and pickeroon all those years ago...I live in Maine now, and am the weekend warrior homeowner, and Peavey Manufacturing is right close to the hovel...worth the purchase even for a homeowner. I had Asplundh cut some good sized maples near the power lines, they left behind 4' bolts that I had to move...that pickeroon into the side allowed me to drag 4' x 10" bolts all day long like a bulldozer, and to drag them up into a stack...I felt like a man...a sore man the next day, but given that I am also a fat old man and they were two 30' tall maples...sore was to be expected. LOVE your videos!
Wish I knew how often you check for new or newest comments -- or if the infamous algorhythm notifies you of new comments on old videos.
I wish you had pulled the peavey out of its' corner. It needs an introduction of its' own, plus what they did to make it a woodcutters "timberjack". And also for two other things. One, in the woods, if you fell a tree that gets hung up in another tree or two, the peavey can often be used to roll the hung up tree out of its predicament.
Plus the difference between a peavey and a CANT HOOK. A cant needs defining, and why its not a peavey. And several of the portable sawmill companies need to know that too.
Great video. Thanks.
please do a video or re-handleing tools axes hammers ext
Not everyone replaces a handle the way I do.
First, pick a handle with the grain, (lines between soft & hard, Summer quick growth and Winter slow growth), …with the grain running front to back, not side to side or diagonally. You will think I'm full of shit, there ARE no handles with the grain running front to back. You're right. Handles used to be made by Americans who understood tools. Today, handles are made by morons who don't have a clue-but nonetheless-there are 360 degrees in a circle, and an excellent handle being within a range of about 6 degrees, they accidentally make a good handle, (360 ÷6=60),about one out of 60 handles correctly. The grain should be tight, 1/32" apart is better than 1/4" apart.
Make sure the handle is right for the hammer. Note: if the hammer handle is Oval, and the opening in the hammer is rectangular, there is a good chance that you have the wrong handle. Once again, that was what passes as humor. SHEESH! Do I have to explain everything?
You need a wooden wedge, and 1 or 2 metal wedges with teeth. They should come with the handle, but don't forget the, 'morons who know nothing about what they are making building the tools for those who do,' principle. I use wood glue. Saw the old handle close to flush with the hammer, & use a punch to punch out the old handle. You can save/use the wedges from the old handle.
Punch from bottom to top. The wedges spread, so if you try to drive it out from the top, it's like a semi on a bike path. From the bottom, you are driving from the narrow end toward the wider end. Buff the inside with a bit of Emory cloth if you like. I was always in too much of a hurry. Start the handle into the head. Don't start the handle into the top of the head. That passes for humor. Tap it lightly so the handle fills the hole. Pour some wood glue in the top of the hammer head, smear it along the sides. You are not gluing the hammer handle to the head. You are providing filler so the finished handle makes uniform contact with the head. This will minimize the handle loosening later.
Note: if you use your hammer with replaced handle for a couple of years at sea level, then do a job at 10,000 feet, your handle is going to loosen up. Don't worry about it unless your new home is at 10,000 feet. It will tighten up when you go back to your cottage in Santa Cruz.
NOW, drive the handle all the way on the head. Be mindful that it is the right attitude. It could be leaning forward, not 90°, or it could be leaning back. You may decide you want it canted forward or back.
You measured the handle well; it is the right handle for your hammer. Drive it on, and the base of the head may be digging a bit into the handle when it is fully seated. You can trim it with a knife later. The handle is protruding out the top, glue is coming out, wipe it. You are satisfied. Take the handle wood wedge, a little glue, drive it into the sawed curf running from front to back on the head area of the handle. Drive it until the handle tightens in the head. Take a hack saw, and cut the protruding handle at the top of the head. You will scuff up the top of your hammer. You don't care. It is not your $500 stepping out shoes, it's a tool, function over form. You will look at the scratch marks from the hacksaw for the rest of your life. You don't care.
Cut flush with the top of the head, you get the metal wedges. A topic not broached with the wooden wedge, you will also drive the metal wedges, which implies that you own a second hammer. I have over a dozen hammers, not including sledges, single jack & double jack, axes, mauls, etc. Place the metal wedges carefully. Some wedges are narrow, and can be driven perpendicular. Some are wider, and have to be driven diagonally. Finish with a punch, and drive the wedges flush. Consider the width at the widest point.
Once you drive the metal wedges, wipe up any glue with a damp cloth or paper towel. Don't use the hammer for at least 24 hours, preferably a bit longer. (e.g.; fix on Friday, drive nails on Monday). Consider a cake of bees wax, rubbed on the handle, will keep it from slipping from your hand.
If you like this, keep track of me. I will soon begin a channel, and you may get something from what I offer. Best, Tom
I had a good feeling you are a Christian...pretty neat to see the fish simple as your family’s brand. That made me smile and I shared it with my wife, who is watching your Spec House build, as she is becoming an inspector & wants to learn more of the details.
Even if your content was not outstanding (and it is), I would subscribe (and did) because of your willingness to honor the Lord. I think it’s wonderful.
Andrew Fuentes that was my favorite part of this video!
Enjoyed the video. Recognized most of the tools.
Best logging brand EVER!!!!!!!!
I love all the old tools!! I am working on restoring a few I got at garage sales.
I am a blacksmith and I like to forge all the time my great uncle had a monster maul and he put the handle in a vise and made it almost a oval for better grip without the rubber it is the best for splitting hard wood here in Missouri love all of your videos and love learning from you
Great stuff! I don't agree about the brush axe. Where I live it was used for a very specific puprose. It was used for harvesting young branches and leaves for animal fodder. The branches where mainly cut from pollarded ash trees. Pollarded means that the top was cut off above browse height so the tree could recover. If you know ash, then you know that the young branches snap quite easily, and a good axe makes for fast progress for this specific task. We don't need the fodder no longer, but we maintain the trees. They are hundreds of years old now, and hollow inside, so they will topple if they are allowed to grow too tall.
Nice to see my adze work in your video. I enjoyed the video. I have pretty much every tool you showed there.
Pickaroon is officially my word of the day. If you're dad's still around, I'd love to see you interview him in a video.
I really like this guy and would love to meet him someday and the fact that he's Christian makes it even better
Thanks for the lesson and the laugh, when cutting the cable your hammer flew off the handle!! Lol love the channel Howdy from Indiana!
I was kinda surprised when I realized that my family (dad) has almost every tool you pulled out (mostly just no farming ones, hes a logger :D). People like you and him are treasures for us all. When I read the comments of appreciation from other viewers, it makes me appreciate even more my own upbringing, and the family and father figure I had in my life. He taught me so much and gave me the opportunity to use tools like these and learn the proper techniques and care.
Just wanted to thank you for the channel, and the effort you put into your videos.
In my little town in Tennessee we called the "Weed Whip" a "Lively Lad". And it's great to hear that you and your family know where to go for strength when you need it. Love your videos! Thanks!
About 50 years ago, because our tractor was not running I once cut an acre of grass with a scythe. The weeds were kinda like wheat being about 4 feet high.
We called them a whistle billy. Chain gangs used them in Hillsborough county to clear the road edge and bridge areas to difficult to mow. Of course a young man I grew to dislike them.
Here is a man who knows his tools and I've seen that hay saw, but didn't know what in heck it was, or used for, Thanks!
No kidding about those chips on the splitting wedge coming off. . . A family friend narrowly avoided a piece getting buried in his heart. Had he been about fifty pounds lighter and thus thinner, he might not be around today.
Wow you done it again sir. I learned so much with this short video. I have done if these tools that I purchased from yard sales just because the looked cool had no idea they had a specific task. Thanks again.
10 minutes of rapid fire naming of every different type of tool...
"now bear in mind... I'm not an expert on this..."
If you're not an expert... who is?
legit
it's the people who tell you how confident or great they are you have to watch out for, and mostly are full of it. its called the dunning Kruger effect en.wikipedia.org/wiki/Dunning%E2%80%93Kruger_effect
The settlers
Not you, you're just a troll.
@@peterellis5626 You're a troll lol
Awesome video - i want to come to your shop and spend a few days restoring/cleaning/sharpening/oiling all of your older edge tools. One of my favorite things to do in the whole world.
I grew up using a monster maul. Chopping wood and clearing land builds character.
You can't forget the firemans pick head seagrave axe!
Loved the story about your family logging brand.
I love the story about the family log brand.
What a collection. This makes me wanna do some heavy yard saling this year 😅
God bless you my Christian pal!!!
This video is kicking all kinds of ass. I'm getting into restoring cutting tools, and this is a great primer.
Wow, the rare sight of Scott in a shirt that isn’t tan!
The last pick axe you picked up just after the the baby one I would call a Mattock in the UK, great tool for excavating fairly solid ground and saves having to pick up the spade/shovel so much.
That wire axe looks like a long day.
I was thinking that looked worse than the monster maul.
I bet the new guy draws that duty!
Great video, very well put together. I liked the way you just dove right into it, no nonsense!
Just getting into axe restoration and I picked up a couple tools you go over in this video.
Thanks for the great info.
Great Video!
Children today need to see this so they know what the early pioneers went through to get to where we are today!
Love the old tools , great video!
I helped my F.I.Law many years ago, he was a Pine Faller, that's where my fascination with axes began, i would trim and stack, i only had a axe but it was great for that specific task, i think it was "Sandvik" or similar? medium sized but nicely weighted for trimming limbs.
Years later i started looking for a nicely weighted axe, 22 axe heads later, i gave it away, i ended up with 2nd hand axes from the US, Japan and New Zealand, brand newbies from Europe. One of the best is a old Blacksmith's axe with no name it keeps a edge for ages, the worst would be the cast ones, they do not take getting tapped on the Poll, but your collection is great.
Lol, I use a pickaroon everyday. The joys of working in a mill.
I feel your sentiment about the monster maul, I don't want to think of how much oak I had to split with one as a kid
These videos are amazing and I always learn something new. What I love about them is that they come from a person that has actual experience of using these tools and knows what he is talking about.
Keep them coming!
I am tired after just watching that cable get cut ... real mans work
I thought I was the only one who had a Monster Maul! I grew up on an almond orchard in CA and spent many a winter on the wrong end of it. It works great but man, you don’t need to worry about going to the gym after a morning swinging that bad boy.
Thank you for all you post on this site. My grandfather was a mill right for Roseburg Lumber and a self taught craftsman. I have most of his tools and have been working with them for years but you have given me new inspiration
The great thing about the wooden maul is that you can break the handle. That's what my dad and uncles did when they were kids chopping wood to get out of it
I like that marking axe and the story behind it! thanks for sharing your stash. ;)
Wire Axe - I've been around timbering, axes, and working men all my life (UP Michigan), and I have never seen this one before. I love learning from your videos. Thanks.
Incredible wealth of knowledge. Very grateful for you sharing your knowledge with people like me looking to learn!
What a great collection of tools
Great info on axes. I'll be using the axe knowledge.
Really enjoy your videos! Thanks!
The wire ax looks like lots of fun.
I really enjoy your videos I’m 30 hrs old my grandparents raised me and I was around a lot of these tools my parents have since moved on and your videos remind me of my grandfather thank you for clean and knowledgeable content
Great video! A video about different knives would be cool!
I have used skiving knives, paring knives, and filleting knives which all have their peculiar uses. There must be more.
I really enjoyed this. Thank you.
The weed whip is a handy tool! I’ve always called it a yo yo, but it’s a whip. Great video. Some really old hammers! Long live the cutting torch!
“Nothing to it!” Lol love the channel
I've been watching your channel all evening. Absolutely awesome and very much appreciated content. You are extremely well spoken and knowledgeable. Thanks so much for sharing your wisdom with us.