Sencam 40 LED USB Rechargeable Motion Sensor Cupboard Light Unboxing
Vložit
- čas přidán 19. 02. 2019
- There are several options for motion sensing lighting around the house and having some as flexible as the Sencam light we have here becomes problematic. If you have a position in mind then this is a great get. The 3M tape on the back has a long magnetic strip on it allowing the user to easily remove the light once installed to charge.
However, if you are thinking about where it should go or have a couple of locations in mind then you are not going to be able to test very many out as once the 3m tape is in place then you are going to have to stick with it. And at around £17 for one, you are best doing your thinking before had.
Here I pull apart the packaging and have a quick play with the light and the quality is quite good. A couple of bumps along the way may concern potential customers, however, this is not really going to handled very much save for the charging it might require once a week or perhaps fortnight depending on how much use it gets.
You can grab one from Amazon here: amzn.to/2SMgiAO
-----
www.techaddicts.uk/
Home of the Tech Addicts Podcast
-----
TWITTER: / garethmyles
PODCAST: www.techaddicts.uk/category/po...
INSTAGRAM: / garethmyles
-----
#Sencam #USB #Light
LED Motion Sensor Lights, using the passive infrared technology, switch to "1" or "3" motion sensing auto turn on as soon as you are within 10 feet and stay on as long as you are moving.
Once you are still for a few seconds or walk out of range, they turn off immediately. These lights can provide excellent lighting at the advantage of being fixed as well as portable if need be.
Best USB Rechargeable motion light for your closet cabinet, wardrobe kitchen cabinets, stairs, hallway, bathroom garage night lighting strips and so on.
With Sencam Motion Sensor Lights, you can...
- Say good bye to bumping into stuff in the dark.
- Comfort kids who are afraid of the dark.
- Cheaper to run than ceiling lights.
◆Warm Reminder
If you switch to" Motion&Light Sensor Mode", please put the light in totally dark space, in this case the sensor will be very sensitive, otherwise it may influence the light's sensitivity. (if switch to "motion sensor mode, the sensor function will not be influenced by the ambient light)
For the sensor range is 10ft, 60-degree, when installing the light bar, please put the sensor ball in position just face to the direction you walk toward to, so that it can fully detect the motion
◆Specification
1. LED Qty: 40pcs
2. Lumen: 280lm
3. Size: 300mmX30mmX14mm
4. Package Weight: 146g
5. Sensor Range: 3-5m
6. Sensor Angle: 120 degree
7. Voltage: USB 5V(Charging)
8. Wattage: 2.8W(MAX)
9. Battery Capacity: 1000mAh
10. Charging: RED light
11. Fully charged: BLUE light
12. Charge Time: 3-5 hours - Věda a technologie
Eammonns side job when he’s not presenting Good Morning. 😂
Who is Eammon?
Hello across the pond!Thanks for the insight on these lights.Saving $ on Power is a big deal today.I would like to add that the settings are usually not concerned with Brightness.The Motion Sensors have a Proximity Setting to prevent false light ups.I have a dozen of these type light bars 80 led each aluminum body center sensor opaque lense single switch 3 settings.On Continuous for a time,Close Proximity and a Further off one.
I like these and recommend them though if they are in attic or basement take a flashlight torch just in case the battery has let out.Good luck all in UK from New England.
I would add that you can And Should Waterproof these lights with a Marine Grade Spray or another or even a plastic bag or saran wrap in the event of moisture.
I bought two for the wardrobes, and charged them up on my computer USB worked brilliantly, as I open the door they automatically come on. It's just like the fridge love it. What I don't like is the sticky back isn't strong enough and it falls off the door, but it still works as it comes on where it's fallen.I bought one for my daughter she has no computer, so I bought an electric 3 point plug, with 2 USB sockets for the adaptor to go in. I went to charge it but it just does not charge the light, like the one on computer does. What should I do. I am in my 80s but I can't fathom it out. Thank you
Thnk you
Tell me the logic of USB rechargebility in cabinets.. you glue it inside the cabinet, is there a trick to remove the battery for charging, or the lamp itself has some way to be removed without unglue ?
I couldn't find it either, but mine literally came apart.... the sticking part & the actual lamp separate.
(Took me 2 days to realize that.
Hahaha, I was going to charge w portable charger!)
There are magnetic strips included
Watch the video. He explains and shows this in the first 2 min.
How can I get??
temu
Randy
Ummm... isn't there some places you can go? Certain bars or websites?
I will never buy this 😅🤣🤣🤣🤣🤣 sensor not working properly ... Made in China
If you'll never buy it, what makes you say that the sensor doesn't work?
& you sound racist!
(My sensor works.)