How To Make Harry Potter Paper Cut Light Box | DIY Tutorial
Vložit
- čas přidán 25. 06. 2024
- This paper cut light box inspired by the story of the boy who lived - Harry Potter. Nothing difficult, 3 simple steps and you will get your own coolest light box.
Download templates for cutting here:
Patreon (subscribe to get access to all templates) : / dr_papperoni
Gumroad (buy only this template): drpapperoni.gumroad.com/l/har...
Join my community (Instagram, TikTok, Patreon): taplink.cc/dr.papperoni - Krátké a kreslené filmy
I’ll try thank you for the video ☺️
Incrível! Virei fã!!❤
I'd like to congratulate you on your incredible and inspiring work. Amazing!
Thanks 😊
Amazing!
Thanks!
Wow loved it. You’re so talented
Thanks!
Hello from Kazakhstan! Amazing work. I’m as a fan of HP world was impressed 😁 would like to make this one
Hello! Thanks! Hope you will enjoy it
just made one and its beautiful!
Thanks!
how did you mange to cut it out that delicatly ?
Amazing job! Love it! Could you make one inspired on Elvis Presley?
Thanks! I’ll think about it
people like you will come to the paradise. thanks for sharing!!!
Hello from Ukraine ❤
Thanks a lot!
I managed to build it - looks great. I used 160gsm photo paper, which works great. And tips: print the template mirrored, then you can cut it out and even if you dont manage to cut away every bit of ink noone will see it from the front. :-)
I am just not satified with the "accordions" for spacing, I might look for a better solution.
You can try frames from foam board for spacing
I think your videos are wonderful, I made one for my sister and she loved it. Could you do one about the book “A Court of Mist and Fury”?? I'm sure it will be very successful. Here in Brazil everyone is addicted to everything that has to do with him. Thanksss
Thanks! I’ll think about it
Poderia me mandar o link de onde comprou o light box frame?
@@StenioTorresTower Eu compro quadros de uma loja local. Mas você pode encontrar no ebay e na amazon.
Hello! Love the tuto! I will try to do one for my friend but with my own drawings! Are there different types of watercolor papers? Because mine is quite thick and I need to pass the knife several times to cut it SO I wonder also if the light will diffuse well
Hi! Great! I use usual watercolor paper 200gsm.
@@dr.papperoni Thank you very much!
Hi! Your work is amazing. Im using cricut design space ,How do you make you off set thinner? Mine has a thick offset when i print it
Thanks! Sorry, but I don’t understand, what do you mean. What is offset?
Awesome! I'm following your ig! one question, can you send me a link to buy the led lights with the switch?
Thanks! Sorry, but I don’t have a link. I buy it in local store
Do you need to cut the LED strip to fit inside the frame? I just bought the Indiana Jones template so I want to start making it soon. Thanks.
Yes, for my frame I cut about 94 cm
What type of paper do you use? Standard printer paper or cardstock? Thanks!
It’s watercolor paper 200g/m
Can you use q criket cutter to cut out the paper...my hands are not good but I'd really like to make some of these especially this one 😊
Hi! I think that my SVG templates should work with cutting machines
Can you make something on The Vampire Diaries?
I’m sure I’ll follow your work
I’ll think about it
What kinda water color paper did you use? I mean how much was its weight?
Hi! I use 200gsm watercolor paper
Hi can you recommend a suitable frame box? I’m otherwise set to give this a try.
Hi! You need 20,3x25,4 cm frame with 5cm depth. I buy it in local craft store. But there are similar on eBay and Amazon. It’s called Shadowbox frame
wow that looks really great. I bought your template, but unfortunately it doesn't work that way for me. May I ask what is the depth of your photo frame and what is the brightness of the lamp?
Looks really great! I hope I can still do it that way! and sorry i used google translate and hope my questions are understandable.
Hi! Thanks! My frame’s depth is 5 centimeters. And I use 12V, 3000K (warm white) LED strip lights.
@@dr.papperoniwhat length of light do you use?
@@setabgaming8160 For 20,3x25,4 cm frame, I use 1 meter led strip
Thank you
What size do you fold the accordions ?
Hi! I make gaps between folds in 8mm
I need the pettren please ❤
Hi! All the templates you can download on Gumroad, Etsy or Patreon: taplink.cc/dr.papperoni
Hi the the 8x10 frame is it in inh or cm?
8x10 inches (20,3x25,4 centimeters)
Hey, they are so beautiful but my problem is, that the light don‘t shine through all the papers. Can you tell me how strong your led lights are?
I use 12V 60LED/m strip light. But most likely the problem is in the paper. For the best results you need watercolor paper 200g/m
From where can I download these templates please?
Hi! You can download it here:
drpapperoni.gumroad.com
amazing! Can you link the frame to buy please? :)
Thanks! Sorry, but I don’t have a link. I buy it in local store.
@@dr.papperoni ok! how many Volt for the led light?
@@Martapg 12V, 3000K warm white
@@dr.papperoni thank you so much!!
Hello from India. So amazing and creative, brother. Can you please share the shadow box amazon link with us, it would be really helpful. Thanks in advance.
Hi! Thanks. Sorry, but I buy it in local store, so on Amazon you can find something similar.
@@dr.papperoni okay brother
@Dr.Papperoni your messures for the templates are off - in the info it says "PDF 20,3x25,4 centimeters (10x8 inches)" but the borders when printed are 20,3cm x 28,6cm so about 8x11.2 inches.
You should choose “Print in original size” in the printer’s settings
@Dr.Papperoni Can you specify the paper you used? What weight is it per square meter? And how do you mange to make such a clean cut out?! When I try it my best it always looks butchered
I use a watercolor paper 200gsm and shrap pen knife (craft knife). You just need a little more practice.
@@dr.papperoni I got the paper (or atleast one that is also 200gsm) and tried to cut out the first page. 3 Trys, where I did the whole page and each looked horrible. Especially the letters für "Harry Potter" are pretty much impossible to cut out, atleast for me :(. The paper is rather thick, therefor I need to press hard, which leads to bad quality cut outs - the rounded corners are very difficult while pressing so hard. Also its super hard to precicly cut out the print, meaning to fully cut away the black lines - I will now try to print the whole template mirrored so I can hide the blacklines on the side facing the back of the frame, or am I missing some advantage of printing it normal? Which means another trip to the copy shop, cause neither my printer nor the printer of any of my friends manages to print on thicker paper (>100/120gsm).
Maybe the paper is still the issue - Can you maybe provide a link to a suitable product? Cause "water color paper" doesnt really translate well into german product names ^^
@@Fl43cH3 I buy this paper at my local craft store. You can also go to such a store and ask for paper for painting with watercolors (weighing 200 grams per meter).
Similar paper is available on Amazon, but the price is very high. I think it would be cheaper to buy from a local store.
www.amazon.com/Paper-Artists-Watercolour-200GSM-Pressed/dp/B093ZZYPGF?th=1
Im not sure if im doing something wrong but I downloaded the templates and can see each page but once I print it it changes the image to all of the pages together on one page, can you advise?
Hi! Try to use another program for printing. If that doesn’t work, write to me. I will make templates for you in a different format.
@@dr.papperoni it was the print program for sure! Thank you for replying
Hola
Como hago para descargar las plantillas ? Gracias ❤
Hola. Las plantillas se pueden descargar desde Gumroad o Patreon. Los enlaces están en la descripción del video.
Como hago para obtener las plantillas de este video. No me deja acceder al link para descargar
Try to use VPN
Wahou Very good job! Is it possible to have the Link of what you bought to make it?
Thanks! I buy all in the local stores
@@dr.papperoni Ok can you give me the size of the box please?
@@Anime_your_life It’s 8x10 inches (20,3x25,4 cm)
@@dr.papperoni thank you
@@dr.papperoni i will subscribe to your patreon today.
I'm sorry to disturb you with my questions but I'm a beginner.
Can you tell me the weight of the paper that you use? 200g Or more?
Are your template in box size or in A4 size?
Bro what is the best cutting machine to use for the svg?
I’m not a big expert, but a lot of people work with Cricut and Silhouette cutting machines
Im planning to buy your art bro but I dont want to cut it myself I want to use machine, but I dont have any idea about it, if its compatible with your work
@@user-xi8wq5cy9b A lot of people use machines for cutting my templates, but I don’t know how it actually works
I can't download the template i am unable to access the website help me please
Try to use VPN
How deep is the frame? 😊
6 centimeters or 2,36 inches
@@dr.papperoni thanks 😊
I tried to get only this template, but I can't. I am from South Africa.
What the problem?
How to by this template?
You can buy it on Gumroad: drpapperoni.gumroad.com
@@dr.papperoni Apparently, because of these damn sanctions, my country’s bank card is not supported... and it’s a shame
Can I buy your templates and resell them?
Of course not. You can make your own templates and sell them.
@@dr.papperoni when buying the template, I can make the light fixture and sell it, right?
@@impe_mark No, it’s only for personal use
I want to download.. but i cant... i am from india.. please help me
Hi! Are you unable to access the site?
@@dr.papperoni yes sir... is there any other way
@@afzalmemon7082 Ok, write me your email, I’ll sent you templates
@@dr.papperoni This makes it sound as if they were once free, but they're $5, correct?
@@afzalmemon7082 did you got the pdf? Can you share?
Did you made Stranger Things ?
Not yet, but I plan to make it