Top 10 Tools Every Man Should Have
Vložit
- čas přidán 23. 08. 2024
- Many of our videos are comedic & satirical & not intended to cultivate antisocial or unlawful behavior. Thank you for supporting our Channel through the below affiliate links. No price increase for you but we may receive compensation.
-Amazon - our store - wranglermart.com
-Jk Boots - www.jkboots.co...
-Radios Made Easy - radiomadeeasy....
-Amsoil - www.amsoil.com...
-GoDark Bags - godarkbags.com...
-Premier Body Armor - www.premierbodyarmor.com/wranglerstar
-Vertx - shareasale.com...
-My Patriot Supply - www.preparewithwranglerstar.com
-Eden Grow Systems - edengrowsystem...
Become A Wranglerstar Member For Exclusive Content and Perks
/ @wranglerstar
SUBSCRIBE: bit.ly/2btWfQR and turn on notifications to get them
#Proho #wranglerstar
As an old carpenter I have a fascination with tools of all kinds. My tool belt got loaded differently on each job. Good picking of tools Cody and I'm proud to be an uber subscriber.
If there's a teen out there that needs some of those tools, let me know. I have many sets similar to Cody's, and would be willing to pass a few on to the right kid. But first of all, i hope your a teen. Loved the video Cody,Thanks
+HOSSMCGILLICUTTI So generous.
HOSSMCGILLICUTTI hey I'm 16 and I know it's been a year since your comment but if your still willing to pass those down I'd love to take them off your hands. Thanks either way
I hope the tools this offer went to are well used! such a generous offer! you sir are a true gentleman. I hope one day to have tools like this sir!
HOSSMCGILLICUTTI if you still had then is there a way to contact you?
im 13 but in the uk assume ur in the US😔
Me and my family remodeled our home and it’s an experience I’ll never forget. We have very little experience in construction work but with the help of friends, masters in their respective trades, we learned proper framing, flooring, electrical, and plumbing. Best thing was that we kept the tools we used and feel safe in maintaining our home thanks in part to CZcams channels like these...
Just a little note. In Canada more specifically Manitoba, we have a building code that requires nails for construction, for the simple fact that screws don't have any shear force quality's, the screws provide a nice tight joint and you won't get any sagging over the years but in any major shifting in the building screws can snap. Best practice I find is to use both screws and nails. takes a little more time but provides the best result. Just learned this in my apprenticeship training. This could be applied more for structural I'm sure it shouldn't be a concern for interior walls and such.
True. Always pound some nails if a ledger.
If construction screws are used then that's no longer a problem but any other screw can't hold up
+Colin Knockaert Good point. I hadn't thought of the shear load of the hardened screws. Nails will bend before breaking off the head.
Is there any consideration for gluing building frames? In the 70's I worked for a manufactured housing company and they glued all the framing together. The stuff was built in jigs so it was fairly easy to glue the joints. We put no more than 3 nails in a joint because it could split the wood. Once the glue was dry you could pull the nails and the joint was still stronger than one with just nails or screws.
+Old Sneelock's Workshop glue helps with noise too.
The modern Torx head GRK No 9's has something like 3x the sheer force of a typical construction nail. What you also notice with the data sheet is that often the wood will fail before the screw joint once you get up to No 9 and no 10 screws. Experiences with these screws also show that they are noticeably stronger than nails. If they are to all snap in an earthquake, they would all have to snap together... for a light lumber frame structure. in which case, you are probably in more trouble than nails vs screws. To me, that's convincing enough to do most repairs and small jobs with these GRK no 9 and no 10 hardened steel screws. I am not a builder, not even close, but I would definitely go with the best nails available above and beyond your code. If they allow screws, then use the best ones available to you
Thanks for all your videos Cody. I appreciate all of your efforts. I have completely changed my view on the work that I do over the last few years. Largely due to your videos I now sign my work and date it. I don't subscribe to the "Get in - Get out - Get Home" attitude of fellow plumbers and people I work with. I won't be rushed anymore and I do everything to the best of my abilities. Keep up the great work, Your helping a lot of people. All the best JD
Thank you.
+Wranglerstar I am getting ready to build me a 12x20 garage, and I am wondering would a 48'' level would be the only level I need? Or should I get a 24'' level as well. Also have you heard of Mcrose Leather? They make great tool belts as well and they are a little lighter.
Going through a person's toolbox or tool belt is always an interesting look into the way they think and work. Everybody has their own small things they think are important.
I don't know if it's necessary for a carpenter but I do electrical work and another tool that is ABSOLUTELY ESSENTIAL for me is a headlamp. Working in dark areas and having a good head lamp is a life saver and a headlamp keeps both hands free unlike a regular flashlight.
Great tip.
+Nathan P I always carried a Double C cell flash until I got my first head lamp. Dropped the flash back in the big box and never bought C batteries again. My head lamp has 3 AAA batteries and they hold up for a couple days of steady use. The ease of not having to hold the flash in my teeth working in an attic is priceless.
+Nathan P I do electrical work too, mostly switchgear and such in buildings where the power has been dropped. Headlamps are a God-send.
knee pads and headlamp. Headlamp is super useful even in a well lit room. Makes everything go faster
I can't tell you how much flak I've received even over the littlest jobs and always wearing my tool belt loaded with the select few tools that I view as essential. It's always the same story too. As soon as the work starts to get serious, everybody starts saying "I wish I had a tool belt so I don't have to bend over so much."
"Do you have a pencil? I lost mine."
The list is endless.
wranglerstar your video is fantastic! this is why I subscribe to your channel. so many people never grew up in
a home where woodworking, tools, tool belts, or even how to set them up was ever discussed. just taking the time to explain it is worth its weight in gold. I'd rather watch your videos all day then turn on the TV set, it's as simple as that. Thanks again.
+magicrobharv thanks
As always another well put together video! I'm on vacation in nyc (my wife's gift to me for my 40th birthday) and I saw you had a new video up so I told her I had to go back to the room to use the bathroom. She knocked on the door at fifteen minutes and said are you alive or watching wrangler star? Lol she knows me too well!
+Josh Merrell Happy Birthday Josh! That is a funny story....
Hi, it's me Claudiu from Romania, i've been watching your videos since 2012 and I thank you for inspiring me to buy most of my Stanley tools that I own.
I started buying Stanley tools since I was in highschool for building my house with my parents in 2012.
While looking for more tools on CZcams I found your chanel, and you helped me a lot with your videos of what I need to buy to do my work.
Please, I would appreciate If you would start making more tool videos like this and those with " tools to survive economic collapse ", they are very usefull for me and other's.
Whant's again I thank you Wranglerstar for being an inspiration for me !!!
Bought the Occidental Leather ranger belt with the Fat Lip synthetic bags. Cody is so right the quality of these are incredible. I wanted to have a tool belt that would last a lifetime. This is it. I got tired of using tools on a job , settling them down, only to have to hunt for them later. Now I have to train myself to always return them to the belt. I enjoy your channel very much. I learn something every time I watch it. As a fellow Firefighter I also want to say stay safe out there brother.
I've worked in residential home building my entire life still working for my father's company and I would like to say that you are spot on with your tool bag set up and philosophy of use. I would highly recommend this video to anyone who wants to do construction.
The first time I worked a remodel the head carpenter made all the new guys go buy toolbelts before we could show up for the second day. We learned fast!
Something I would add to this list that I think goes along with the suspenders are knee pads. You'll be on your knees a lot and you only get one set of knees!
+jay90374 After a bit longer than that I can't kneel on the floor without them. :-)
+Falco770 you could also add some gloves to that. you get a lot of splinters when working with dry lumber and is just anoyying.
I'd also agree with the gloves. In high school I worked directly with a 70 year old farmer who did everything in gloves. I swear he could pick a hair off the concrete floor with leather gloves on;)
+Falco770 its currently 3/17/2016, i usually wear my knee pads at the start of work, out of all the work crew, im thee only one wearing knee pads, im 27, i dont have cronic knee pain, i just dont like kneeling on hard concrete floors. or a hard ground surface.
I think you'd pack a second bag with your knee pads, gloves, hat(s), hearing protection, eye protection, bug spray, sun block, water bottle, etc etc.. These are essentials that you'll want on any job site, but probably don't need a spot in/on your tool belt.
It doesn’t matter what kind of tool pouch so long as it fits your needs, but it’s EXTREMELY IMPORTANT that you get a wide belt! If you don’t get a wide belt and you have your tools on your waist all day, the more weight you have on a thin belt the more it will dig into your sides. Make sure the belt you’re getting fits the pouch though. It’s really worth the extra couple bucks. Also if you carry a bucket for your tools, they make soft thick universal rubber handle attachments that go a long way too. If a power tool can get the job done quicker and safer, go for it. You don’t want to put your hands through repetitive motion of hand tightening 30+ screws. Only exception is breaker box or sensitive materials. If you work in a factory as a mechanic, get yourself a cart to wheel around and maybe even a little stool to put on it too. Repetitive motion wears on you through the years, so Protect your body from discomfort and strain at all cost. You’ll get tendinitis, carpal tunnel, joint problems, back problems, you name it!
Knee pads and kneeling mats too
I have been a carpenter for over 35 yrs and I purchased a complete framing bag set from Ox in 1999. I use it all the time and is still in great shape. When I bought mine they did not have the light series like you have. I have all leather bags. The framing bags are set up a little different storing tools then yours are. I have the tape holder at the top of my right side bag. You are so right about the suspenders. The weight of my bags with tools in them and fasteners gets quite heavy. Great video Thanks
Couldn't have come at a better time! I'm 19 and my parent's new home finally has a work bench that I can use, could you possibly do a video on basic starter power tools (shop tools) too? If you've already done one I'll have a look for it now! Thank you as always, Alex.
Hey Cody love your videos thanks for all your work. I have a tip for ya, if you put a pair of small magnets one on the inside one on the out side of your small potables pouch you won't lose your small screw bits.
Good idea
+jpf3082 I'm going to put a couple on my framing pouches.
Great idea, thanks!
It's been a few years since I've worked with a tool belt on, and this video was like a dose of nostalgia. The sounds of the speed square clanking on the table and the hammer dropping into the hammer loop are unmistakable. Thanks for the trip down memory lane!
I'm just starting my apprenticeship and this is by far the most useful video I have watched on here
Cheers 👍
How is your apprenticeship going
Great video. I have several tool pouches, I have a universal one and several specialty types. I find that my 5 gallon bucket bag setup is my new favorite old guy trick.
Looking back to when I was little I remember my dad always working around the house with his tool belt. I'm not sure what brand it is. He was in construction / remodeling / electrical all my life. He's always had the same leather bags and he took great care of them. Even at 70 years old and retired he still has his bag sitting out ready to go at a moments notice.
When the time comes that he passes on I'm planning on building a glass top coffee table that will display it loaded with his tools. It's strange that an object like that brings back so many memories.
Thank you Cody.I love these types of videos. I really appreciate what you have to say and how you say it. I have taken so much away from your videos that I just wanted to say thanks to you and the whole Wranglestar family.
I have never seen this kind of sharpener for the big pencils. We just allways use a knife :D
I usually see them near the lumber/contractor checkout area of Lowes or Home Depot. Sometimes they are in those clear last minute purchase bins by the cash register. They also are on the end cap of the cash register in a package with 2 carpenter pencils and a sharpener.
I have bought several but usually lose them before I finish off a single pencil.
I'll keep my eyes open
+Gulliolm I have one that I picked up at Home Depot. I don't use it. The sharpener makes too long of a taper on the end. I prefer to hand cut the pencil to a wide flat tip that I use the edge of to mark with. The sharpener shortens the grip length of the pencil by almost 2" before it makes a point sharp enough to mark with. It also leaves too fragile a point for the rough framing work I use it for.
Most of the time I carry a Pentel .5 mm mechanical pencil. The metal sleeve supports the lead so it doesn't break. The .5mm diameter means it's always sharp. I started using them as a drafting tool and just stayed with them.
+Old Sneelock's Workshop - Attach that mechanical pencil to an ID batch holder with a reel and a string, and the pencil will never disappear.
+Old Sneelock's Workshop I agree, wide flad tip for the pencil for writing on concrete and other rough surfaces, and a mechanical pencil for the things that need to be perfect.
I use 3mm mechanical pencil tho, with a sharpener.
I totally agree with not having the combination square in the bag but not only because it hinders you. It's only such a sensitive tool that it will loose its precision when it gets caught somewhere or you lean against it.
Mr Wranglestar, i just sat through 15 mins of toll belt video. Not because i'm an uber sub, but because i'm extremely unhandy, and can't finish anything practical without leaving "my mark" on it, or myself. This goes together with my perception of tool belts that i only remember from Tool Time :) But, i wanna be a better man, i wanna be a practical man, i wanna keep all my fingers attached to myself, so i am here to soak up every advice possible. Since you are one of the best at articulating your reasons, you're my "don't do everything twice, do it right the first time, don't hurt yourself so often, try to be effective" source of information. So thanks :)
Nice tool belt set up. In my belt i have all you have except the level. Tools I have in mine and need for my uses are safety glasses, wonder bar and stud finder. Plus I like my belt with double pins on the belt buckle. Great video.
Another great video.
Personally I have 2 CLC Tool Belts myself, one for Carpentry and one for my main job (window covering Install).
Tip: if you are considering getting into Installation work of just about any sort, Electricians & Framers sets tend to work out the best.
(The kind with a built in drill pouch)
Also, if you use leather and do a lot of work that involves drywall dust, clean (vacuum out + clean with saddle soap/leather conditioner) & maintain your bags frequently, the drywall dust can cause the leather to dry out and become brittle if you don't.
my wife got me a cheap Husky belt & bags when we bought our house. didn't wear them at first, but over the past 7 years I reach for my belt and put it on every time I go to my garage to do a project. I'll load it up with additional tools I'll need for the specific project. but it's so handy to not have to walk around the garage or house wondering where I left my (insert tool here).
I wanted to Thank You very much! I bought my first ever axe for my birthday this week. I am a small gal only 5 ft no inches and I like bushcrafting... drum roll here....... a Gransfors Bruks Wildlife Hatchet. A small work of art and a nice tool :) Also thank you for your service to our Forests and critters, I am a wildlife ecologist and you guys are a fun lot. Again, thank you for the fun vids, I learn something new everyday.
Cody,you're doing a great service for those who are willing to learn.I grew up as the fumble fingered son of a super handyman,I'm still fairly skilled in general handyman stuff,but know my limits.Ignore the idiots that just don't get it.Thanks for being willing to share your hard earned knowledge.
MY DAD HAD ONE OF THESE KIND OF TOOL BELT WITH THE BAGS THAT CAME WITH THE BELT I LOVED TO WATCH MY DAD PUT HIS TOOL BELT ON I JUST SMILED TO MYSELF AND YES HE GOES OUT AND HELP PEOPLE WHO NEED THEIR HOUSE REPAIRED. THIS VIDEO IS A VERY BEAUTIFUL MEMORY OF WHAT I LOVED TO WATCH MY DAD PUT HIS TOOL BELT ON
So, is Mrs. W goint to do a list for the ladies? I work side by side with the men and have learned a lot from you Cody , thank you.
Thank you for the video! Great information too. I once sat through an hour long lecture on this and the old timer had the same advice except for one thing. Tape measure went with the speed square on the non-dominant side. Can't measure and mark with the same hand!
Have had my oxy for over 11 years from doing gc work. From pouring concrete to doing finishing work inside residential. It’s always be my go to belt and worth every penny!
I kept a cheap Stanly chisel with me for adjusting mortises and striker plate mortises. About a 3/8" or 1/2" chisel is a great tool to keep close.
Thank you so much Cody for all the valuable information I am very grateful that I found your channel. It has been a wonderful experience leaning so much from yo u God Bless you and your family
Thank you.
what are your thoughts an awls?
Hey Wranglerstar, I'm an electrician and I always use Klein tools (Belt, Bag, and tools). Do you have any experience working with them or do you like them? I'm always looking to branch out and try new things.
Yep, I sat all the way through it. I'll have to add some suspenders to my tool belt. I'm always readjusting the load.
I've heard old timers would have their wives sew magnets in their nail bags and bags with small loose metal tools in them
love that idea!
Great video as always. But what's even better is that I finally got the books in the mail today. My wife called me at work when they arrived and my day just seemed to drag on. I finally made it home. Can't wait to start reading it.
I am just a little disappointed that I didn't get the signed copies. I thought I ordered in time but it doesn't look that way.
I did a bit of furniture making at one point in time and for a pencil i used a staedtler mars 780 technical mechanical pencil that held a 2mm lead w three 'claws.' I never had to sharpen it and I left the metal clip on so it didn't roll. It has a push button advance and push button has lead sharpener. Real slick. I put a red lead in it as line showed up better on wood i was cutting.
These videos bring me back to all the times I worked with my dad or visisted my grandpas and went into his garage and he was working at his work bench. Makes me want to go build something.
I bought the same bags 20+ years ago shortly after I married, but because I was young and starting a new family, I purchased 1 bag at a time due to the initial cost. The whole rig doesn't have to be purchased all at once if you're living on a budget.
Mine are a bit more worn now with hog rings closing a hole or two, but still in use everyday. One better use for that combination square scabbard is carrying an 8" crescent wrench for the routine skill saw blade exchange and maybe a 4 in 1 rasp combo in the right hand bag. Sharpening your carpenters pencils on both ends lends to not cursing a broken tip and placing a short length of 1/2" pex waterline over one end allows you to add a piece of lumber crayon for layout on wet lumber or pressure treated when the pencil marks not.
I also carry a pair of lineman pliers or side cutters where you place your torpedo with my torpedo in my main left hand bag.
Other than that, my bags are almost identical to yours and have served me quite well
A while back I learned from a finish carpenter to use mechanical pencil. Packs of them are quite cheap at walmart and other office supplies store and you get a "sharpened pencil" with a flick of your thumb. Might now work too well for framing projects, but it's a dream for finish work. Always gives you that fine line and never needs to be sharpened.
I am happy to find that I have all the tools shown but not that brand of leather bags. I like to have a magnet in the pouch that I have my bits in. It keeps them together and easy to find.
Watched the whole video! The only thing I don't really have is a speedsquare. I pick up the majority of my tools through garage sales. I got 4 big shoeboxes full of a plethora of quality American made tools and brass fittings for pneumatic tools for $7 once! Now obviously there was some junk in there (mostly broken and inferior brands made overseas), but just for example, there were 6 or 7 pair of Weiss Tin Snips of different sizes. Thanks for sharing Cody! Your videos always make me want to learn more and be more self sufficient!
We are both uber-subscribers lol nice to see you
+Brennan Jones pick up a plastic speed square for a few bucks until you can find a good one.... You'll save a ton of frustration when you need to make an exact angle (not just 90 degree) or lay out stairs.
+Uruz2012 well my gpa has got a couple I can use if the time arrises. I really dont need one right now, since I'm a broke college student. However, if I get a great deal for one at a garage sale I will definitely pick it up
I recommend a Swanson speed square. They are a little expensive compared to others, but they are the best.
I think what's particularly valuable is you shared the thought process behind it all--the "why". What do you use for larger items? (Wrecking bars, sledges, skil saws, sawzall, etc). What's on your short list of go-to tools that aren't in your tool belt? Another video?
Looks like another video
i work around people that dont put there tool belt on when they need to and they always try to come to me if they need something it drives me crazy in my mind a good tool belt is the most important thing anyone can get a huge time saver of course i set up my pouch different then you do but over all i agree with everything you said about every tool right down to the beater chisel i use it at least 10 times a day min and my tape measure i put on the other side grab my tape with one hand a pencil or knife with the other for me its faster but as you know that comes down to personal preference
Watched the whole thing because I am a framer in Alberta Canada and own the exact same tool belt in the same colour, use the same skillsaw wormdrive, and have the same estwing. Bought tool belt and saw about 5 years ago
I love Occidental Leather Tool Tote. I don't use the bags because I am not on the Job Site all day... I work out of my shop but every once in a while I have to go help a friend with something so the Tote is awesome. Great video.
Great Video, I love general tool videos. I enjoy your specialty tool videos. But the basic tool kits, how to set up your shop, the getting started videos are always my favorites as that is the place I am in my homesteading journey.
Hey wranglerstar greetings from New Jersey I'm a kid and I'm in woodworking and I love this video
+Pat Ek thanks!
The video starts at 3:50, the rest is about the bag.
Kamal AL-Hinai he could be sponsored for it
The whole video is about the bag.
Lol
thanks, this is helpful advice
Kamal AL-Hinai is a
Another brand option that is a bit cheaper, as far as a tool belt is concerned, is Klein Tools. I've used varied belt and suspender setups as a Piledriver and the canvas is TOUGH. They make great leather belts, canvas bags and suspenders. USA made as well. Great vid.
I work on something slightly different robots, I carry a multitool in addition to my tool belt for tools that I dont often need to use but is extremely inconvenient to get it when I need to use it.
great Video one thing I have found is if you are looking for a cheaper belt and suspenders (sharing weight on your shoulders) is a army disposal (surplus?) store basic webbing and belt works well and is cheap. Definitely don't skimp on tool holders though they cost a lot but are worth every cent. Cheers ;-)
From someone who has done floor covering I would also suggest a good set of knee pads and gloves to add to this kit. nothing like kneeling down right on a nail head that fell on the ground or even some hard material that may have fallen from previous work/cutting
Knee pads agreed. I got bursitis once: blew both my bursa sacs (apparently fluid-filled cushioning sacs) out in both knees at one time by being on my knees too long laying tile. It looked like a tennis ball-sized water balloon was under the skin of each knee. The only way I got it to go away was drain them using a hypodermic needle and stop working for 3 weeks.
That is crazy... I have almost the identical setup for daily tasks. The nail bags, the Makita power tools. The only thing I don't have are the suspenders, which I need to pick up for days when I carry extra tools and fasteners.
+Wranglerstar I agree with you on screws, however to just let you know the reason you should be using nails is they have been tested for load and earth quakes, where as screws have no shear test.
Yes I just got finished watching the 16 minute video on your tool belt I like your input on how you apply yourself to your tools and your jobs that you do.
One thing that surprised me is that you didn't have a #2 Robertson bit. Then I remembered someone telling me that Americans don't usually use them which blows me away. Robertson screws will stay attached to your Robertson bit to the point that they'll sometimes pull the bit out of the magnetic holder.
Ive a tip from a friend of mine. Have a chalk box filled with baby powder, especially if doing decks or wherever the snapped line is on the face. It'll just wash away rather than stain forever like blue or a couple years for red.
I am doing this right now. I have learned how to do so many things I didn't know to do already
I've been using the Toughbuilt tool belt and pouch's for the past few years, Gotta say I like them for the price how they are made and ultimate customization on how you can set it up. the only problem i had with it was the first year or so the clips would break not to bad for $1 a piece but they redesigned them and have not had to get a new set in a year. I like the brand so much I've taken to caring on all the time to hold my phone, multi tool, and fire radio. and the knee pads are so comfortable too added with the stabilizer snapshell and ive been known to walk on my knees all day with out hurting.
The only problem i see is the hammer loop in the small of the back. When your on a roof or squatting down it gets in the way more so when on a roof it is a fall hazard.
+stacy wright I prefer the small of the back hammer loop. When you wear it like that you learn how to move with it, and most of the loops are wide enough that the hammer can move to the side without falling out.
Not talking about hammer falling out. It is a trip hazard and have seen it happen many times. Everyone has their own way of using a tool belt and bags. That is just my preference.
I wear my hammer "appendix carry". I picked it up while framing houses and have found it more friendly for my purposes. Even when doing trim.
great vid! Completely share your view on the built in hammer loop. One trick I came up with is to wedge a magnet in the unused loop. I use the magnet to keep a drive bit handy or an eventual screw / nail. Really easy access.
Cody, I have been a subscriber for over a year and have gotten through around 2/3 of you old videos. I have really enjoyed them, my 4 year old son really likes the videos with Jack.
I don't normally comment. However I think these may be the greatest invention in the history of man... A retractable pencil pull. I found one on Amazon made by C.H. Hanson for around $6. They are great for when you aren't decked out with a complete tool belt.
Good choice on the oxy's. I like the hammer on the front right loop, its easy to grab. Never, ever, have I had to use two hands to get the hammer in or out! That hammer loop on the back of the belt lets the hammer knock into the back of your knees and gets pretty old pretty quick.
#1 tool is the tape measure. I have been using the Komelon stainless model, it is the best I have found, especially working in the rain (Oregon coast).
I carry a 16 oz wood hatchet handle smooth face hammer. Big hammers are overkill, just grab a hand sledge if you need to smack something. Steel handled hammers lead to a lot of fatigue in your hands.
Good point about cordless drills and drivers and all the different bits you need to carry. I pick up cheap little foam bit holders to try and keep them somewhat organized in that pocket. Always have a handful of 4 penny galvie nails in that pocket as well, good for hooking a tape or chalkline or stringline to.
Another cool little thing is a stick on piece of laminate that you stick to your tape measure so you can write numbers on it, then clean it off with a little spit and polish.
I call it the "stoner pad", lol. Not at Home Depot but you can find them at real lumberyards. Ever measure something and by the time you get back to your saw you've forgotten the number? Hmm, me too...
Thanks for all the great videos, they are fun to watch!
Thank you Cody for taking the time to make this video for us.
I cut my combo square down to 8” it works as a true 6” adjustable square. Carries very easily then keep am 18” combo with the saws for wide material
I cut this down almost 40 years still use the same one
1. engine hoist 2. torque wrench 3. impact socket set 4. welder 5. plasma cutter 6. hammer set 7. anvil 8. engine stand 9. part washer (dish washer) 10. blow torch.
I really like that little chisel you made! I might have to do something like that myself, at the moment I use a stanley folding chisel for that kind of job, it's great to go in your pocket.
You mentioned on one of your videos about your hammer which sends vibrations into your wrist, which makes you hand tired.
I have discovered the Stanley Anti Vibe hammer which does not do this and is a very nice and comfortable hammer to use.
I sat through the video. of course I did. it's super interesting. I want to purchase all of this. I worked for New Haven Partitions and had a terrible little belt at 21 yrs old. I've since moved on to another career but have always loved construction and diy stuff so I want to purchase a better set up at this 31 yr age. I feel like this video helped, thank you. Continued super fan, wranglerfan, Jeremiah. lol
Movie about stitching such belt would be the one of the best videos of your channel.
This was a great video and nailed every tool to a "T" for me. My only difference is swapping the measure and "odds and ends" pockets. That and I usually just use the razor knife for sharpening.
Thank you. I got the newer model of belt that you got. I agree about the tape measure holder getting in the way.
Great video; good tips.
Oh nice, you watch this guy as well.
Am a union carpenter here in Orange County califonia am a big fan of your Chanel you have a lot of got tips for the workin man and what you said about the leather occidental tool bags they are just the best hands down but I put a white canvas Klein iron works bag in the back for my drill or hammer or spud wrench cuz we walk a lot in my line of work sometimes 25 to 30000 steps a day but thanks for all the good tips that are also being used in Mexico so keep it up animo primo jajajaj
Really cool video, pretty much exactly what I carry everyday except most people in New Zealand use a carpenters square not a speed square. I have started using the speed square for certain jobs and love it! Thumbs up Wranglerstars.
Thanks. You have given so much advice like my father has set me up with too. I kinda wished my family lived that way. I'm kind of getting tired of the city life myself.
Thanks.Never to old to learn and I am 65.I still have my father old plumb bob.Kinda fat thou but the one you show has been around for some time.Do you know of a better one for today?
I really enjoy your videos. You fill the gap of practical experience and good advice that I miss from mostly working on my own.
Cody, I really enjoy these types of videos. I was wondering if you keep a 5 gallon bucket or toolbox with you for the non essential items? If so, would you be willing to do a video of that as well? Thanks
How could you not watch all the way through? Very informative and this list is great for gift giving.
Great advice, Cody. That's what keeps me coming back to your channel.
cant wait for the next one about all tools in the belt, definitely taking your advice on the buying the belt and bags
Thanks for the video, Cody! I agree with you all the way. Especially for young people, you can do no better than to invest in your education (it doesn't have to be college, necessarily) and your tools, especially good hand tools. Buy them once and if you take care of them, your grandchildren will be proud to use them. :)
A beater chisel, yeah man, I do that too. :) I keep a better one in the bucket bags.
Thanks for the vid, I find it enormously interesting what other nail benders are doing.
I was taught early that a hammer loop in the small of the back is a way to break your back in that spot if you fall over backwards.
That's the best explanation for getting quality tools I heard someone say out loud!
My humble 2 cents on tool bags.... Occidental Leather Tool-bags are hands down the very best! I have had mine for 15 years, worn 10 hours a day. You will only buy one set in a lifetime:) ..and made by hand in the USA!
I am really liking this series on tools and giving me some interesting views. However can I please ask is a tool belt really that necessary for the average DIYer? I am not doing significant construction the most I would do is build shelves and decorate so not sure I could justify 200 pound on a tool belt! Completely agree how this would save time effort and money if you are paid by the hour on a construction site but not sure how relevant this is for home owners. Certainly getting the other tools together. Got a speed square today after your recent video and looking forward to the rest. Thank you.
hey, great video! just a comment on framing using screws vs. nails, as you may be aware, screws have very little shear strength, so they could fail quite easily with a big temblor, just wouldn't want someone's roof coming in on them.
+Marc Chilifritters Yes. We use nails.
I like a wooden handled hammer, my arm and elbow is not as sore at the end of the day as when I use the Estwing all day long. As of late, I have been using an old roofing hammer (hatchet) that I love for using with framing also, as it is nice to have the hatchet for quick trimming and fitting. Good video by the way!. Merry Christmas to the WS clan
For the carpenter pencil sharpener tie a string to it to the hole on your bag to allow pulling out sharpener when needed and prevent it dropping out.
nice job Cody thank you I found a lot of my stuff at flea markets and pawn shops
Do you have a thought about leather pouches vs nylon? I like leather but Nylon seemed to be about a pound and a half lighter than the comparable leather pouches...and that's a huge deal after 8-12 hours. looks like your nylon pouches have held up pretty well.