@@ewanthug91 You may well not have but whoever made this video can be seen sanding the ferrule at the 5 min mark, watch the video. This looks like the first tip change (cue and tip look brand new) but after half a dozen or so the ferrule may start rounding off.
Never shape a tip like this. Scrubbing the sandpaper across the tip like this will tare the fibres of the tip. Always do downward strokes when shaping tip
Taping the ferrule to the same diameter of the tip your going to fit just so your can centre it perfectly is a waste of time, just get a tip which is bigger than your ferrule and glue it on. Your cutting the excess of anyway so it’s in line with the ferrule and then shape it how you like. It’s irrelevant if the tip is perfectly centred or not. Also sand the tip from the centre outwards - don’t go to and fro across it you’ll just pull the fibres apart
I commented on this video a while ago saying it was a waste of time taping around the ferrule just to centre the tip……….however knowing this trick really came in handy whilst tipping a friends cue yesterday l. Ferrule was 10.2mm and the Century pro tip only measured 10.3mm - I could never have centred it by hand with soo little margin for error. This method saved me from messing up a £5 tip. Thankyou for your video 👍👍👍
Nice and best way to teach. Initially i thought some gora is making this demo until I heard the very familiar voice in the background saying "choriyan taiz karwa lo, kenchiyan taiz karwa lo, pressure cocker diyan washran pwa lo" 😅😅😅
I use gorilla glue adhesive instead of superglue gel. Means youve got to wait 24 hours but i get a much more consistent play compared to super glue gel. Maybe you should give it a try!
with all those accessories i still believe that's not a good replacement. just because it has more height i mean the tip wont be comfortable for shots...
It was very, very dangerous the way you removed the tip from the cue. You're supposed to lay the cue flat on a table and then cut the old tip out carefully !!!
Decent job until you went to shape the tip. Never ever shape a tip like that, by dragging the sandpaper or shaper back and forth across the tip. You will loosen the fibers on the tip and damage it. This can ruin the entire tip, but it will certainly at the very least damage it and shorten its playing time.
The ferrule is machined flat. Use a blade to get any residual tip and glue off, never sand it.
yup. i never sand it. just use blade to cut off the old glue
@@ewanthug91 You may well not have but whoever made this video can be seen sanding the ferrule at the 5 min mark, watch the video.
This looks like the first tip change (cue and tip look brand new) but after half a dozen or so the ferrule may start rounding off.
@@D.P.G barry stark does mention about this ferrule thing, he said like u just said.. its machined flat dont mess with it..
Never shape a tip like this. Scrubbing the sandpaper across the tip like this will tare the fibres of the tip. Always do downward strokes when shaping tip
Taping the ferrule to the same diameter of the tip your going to fit just so your can centre it perfectly is a waste of time, just get a tip which is bigger than your ferrule and glue it on. Your cutting the excess of anyway so it’s in line with the ferrule and then shape it how you like. It’s irrelevant if the tip is perfectly centred or not.
Also sand the tip from the centre outwards - don’t go to and fro across it you’ll just pull the fibres apart
I commented on this video a while ago saying it was a waste of time taping around the ferrule just to centre the tip……….however knowing this trick really came in handy whilst tipping a friends cue yesterday l. Ferrule was 10.2mm and the Century pro tip only measured 10.3mm - I could never have centred it by hand with soo little margin for error.
This method saved me from messing up a £5 tip.
Thankyou for your video 👍👍👍
Absolutely spot on comment, I couldn’t agree more!
Nice and best way to teach. Initially i thought some gora is making this demo until I heard the very familiar voice in the background saying "choriyan taiz karwa lo, kenchiyan taiz karwa lo, pressure cocker diyan washran pwa lo" 😅😅😅
Thank you for this video! I struggled a little but this is a good idea!
Tape on tip is great idea...
very nice
Thankyou ❤
Parabéns que marca é essa sola... Parece ser muito boa...
Great video.Thanks for posting.
Great video thanks for sharing. Which tip shaper are you using I am looking for one like this, if you don't mind sharing?
Amazing job
Sir nice tricks to re tip.which brand tip is it?
Awesome video
Where did you get this cue from?
where can you get this tip shaper
with a normal snooker cue, the ferrule is flat with the wood of the cue...
smart way to glue the tip
Zhanhong Liu Thanks
I use gorilla glue adhesive instead of superglue gel. Means youve got to wait 24 hours but i get a much more consistent play compared to super glue gel. Maybe you should give it a try!
Great video, do you know where I could get a tool like the one you use to trim the tip down?
I make it myself. You can too its easy
How you make this tool bro ? Omg
You got blue stains on the ash?
I am from Lahore tell me where we buy tip clamp in reasonable price or which one is better plastic or wood
sui gas da chuly v thk kra lo
Perfect.
Thanks you so much ❤️ brother
what if i don't press the tip?
with all those accessories i still believe that's not a good replacement. just because it has more height i mean the tip wont be comfortable for shots...
I need shaper..how much
Ye shaper milskta ha ??
What is the purpose of the scotch tape ?
Nice bro
From where did you get this tip clamp (Silver one)
Bro if u got answer please tell me
I need tip clamp and tip shaper
@@osamaiqbal2598 eBay
Have you tried the Bondic uv glue ?
I always use bison glue
Can any one tell which cue tip is cheap and better
Omin cue tip. Just like mine
SIR I WANT TO.BUY MY OWN CUE AND I'M BEGINNER FROM PAKISTAN WILL YOU PLEASE TELL ME THE PLACE FROM WHERE I SHOULD GET AND THE PRICE PLEASE
Which sand paper is best that can be used in tip shaper, fine or thick sand paper ?
220 no
bhai kis jag hy
What is the 2000 paper and where to get it ?
It is sand paper
10.07.. hear the sound..👉. pressure cooker theek krwa lo😂😂
LIKE
You don’t put tape
Why not?
where did you get your tip shaper
I made it by myself
cues 2 use
plz tell how you made your tip shaper
You could make by cutting a pvc pipe in half and pasting sand paper(fine grain) in the inside
@@FarhanEjazfpfu the tip shape is crap pal. 😢
Meri cue per tip laga do gey aap?
It was very, very dangerous the way you removed the tip from the cue.
You're supposed to lay the cue flat on a table and then cut the old tip out carefully !!!
Pressure cooker theek karwa lo
Pointless centering the tip its bigger than the ferrule...
Because of the person outside, I now know that you're from Pakistan 😂😂😂
😂😂😂
Very nice video though! ❤
@@lehrasibalinasir Thanks bro 😊❤️
Put the cue on a flat surface and cut downward other wise expect to have a few stitches. Ffs
8:24
Decent job until you went to shape the tip. Never ever shape a tip like that, by dragging the sandpaper or shaper back and forth across the tip. You will loosen the fibers on the tip and damage it. This can ruin the entire tip, but it will certainly at the very least damage it and shorten its playing time.
y did u waste a perfect tip, could've shown us a tutorial with a worn off or a broken tip instead
Probably didn’t like it so replaced it
Sui gas de chiulle thk kra lo cue dia tip lawa lo
Not the way to do it over time you'll ruin ur ferrule