kyosho mini rc mini z ma020 awd beast mode upgrades (how to make ma020 faster )
Vložit
- čas přidán 25. 08. 2024
- Ma020 ready set garagerc.net/p...
Syncro touch transmitter
garagerc.net/p...
upgrading speed of ma020 without changing esc/motor or going brushless.
New videos coming soon. Converting MA010 to brushless project coming soon.
Please like and subscribe 😁
#kyosho #miniz #ma020 #minircdrift
Metal clip solution for front pin's clip is a great solution. I'll do it too if I loose my clip.
Everyone seems to use medium springs at the front. I went for the softest setup though. I should try green springs sometime.
I also used copper slip (motorbike/car grease like compound) on rear spring towers , this really improved the rear end predictability .
Do either one of you guys have a driftshark s918? I’m curious to know what differential I can swap it with since it’s a 1/26 scale.
Worth mentioning the Kyosho transmitter is a rebranded flysky. hence why the UI is very very similar
Didn't know that. That's interesting. I know my old flysky worked with this Ma020 but endpoints and turning were limited even more.
Sports models are great as you can buy the FlySky iT4S instead of the 432PT, exact same transmitter but less than half the price. It's what i use with my Sports 2 RWD and its amazing.
Ok I will check it out. Great tip thanks 👍🏽 . I did try my flysky gt3b but steering endpoints were reduced 50 percent even when set to 120 percent.
@@GarageMiniRCUK Like i say the iT4S is the exact same transmitter as the 432PT, Kyosho just rebranded the handset and firmware. Only thing that might need done is flipping channel 3 (might be channel 4,) as sometimes this will limit your steering until flipped.
@@ringod123 ok 👌 checked the it out. Wow. This should work with the evo chip. Great info 👍🏽 can't believe I didn't see this before. I might get one and do a video.
@@ringod123 Do you know if it works with the BS6 gyro reciever from flysky?
@@GarageMiniRCUK Yes it does.
Once in awhile it would be nice to SEE who we are listening to.
Coming soon....
Didn't know it but I follow you on IG too
Haha, nice of you to drop by to say hello 👋 👍🏽 appreciate your support.
@@GarageMiniRCUK I just picked up my first one it's a mr 03. Wish I would have bought a drift car instead any suggestions for the mr chassis? No one around me races these I'm still thinking about keeping it more of a racer instead of a Drifter and maybe get a drift chassis later
@@mzondi1970 yes that's the best way. Depends what surface you run on. Tyres and suspension set up make a big difference to handling on rwd cars. I had to get high grip tyres to run mine on the kitchen floor as would spin out way to easily. This isn't an issue on the track. Also depends on wheelbase 98mm is easiest to handle. Which one do you have?
I have the Sauber body Merc. Haven't checked the wheel base yet. I also just got the WL toys k989. Ill use that for now to practice drifting. Both are still in the boxes at the moment due to all that is going on with this virus stuff. Haven't had time to get them out. Both still rock stock but I have new kyosho drift tires for the 989. I need wheels for it I guess
@@mzondi1970 I think the merc is 102mm. Very stable.
Can a pn racing 50t motor be used with the lithium battery?
I've never used any pn motors. Best thing to do is go on the mini z world Facebook group. They will help. 👌👍🏽
Hi. Can I ask what charger are you using for your 350mah 3.7v batteries ? Cheers
Have new video with better 1.5 li ion batteries and charger going live today.
@@GarageMiniRCUK I just bought a bunch of they batteries. lol
I'll put a face book post of all my chargers so you can see what I use.
@@GarageMiniRCUK Cool.
The track in your garage, can it be configured differently?
Yes
@@GarageMiniRCUK like from one room to another
Yes. You can make different tracks but mimuim would depend on the lane width of 90cm
What is your Rim and your locknut ?
Hi, not sure what you meant? The offset of wheels?
Hi there, will the ma-020s stock esc works on 2 x 3.7v liteon battery without changing the original transmitter? Do you need to add any voltage regulator to get it work? Thanks
I have used and it was OK with syncro touch.
So I hope that someone can help to confirm and advise it over here that this will works by running it in a stock AWD RTR set with 2 dummy battery and 2 lite-on 3.7v without replacing any other’s parts cuz i can’t seems to find more information regarding on this online.. tqtq
It's should run the same as my Ma020 beast mode video. Thst was a stock awd Ma020 with lipo 3.7v x2 and 2 dummys. The transmitter makes no difference to the esc just the steering.
@@GarageMiniRCUK so far no issues running it right? How bout overheating? Any issues? Btw Thx for the swift response dude
No probs. Has a shorter runtime. Just be careful you put dummy connectors in. Not 4 x 3. 7v. I made this mistake with my evo and blew the board. 😂
I have a ma020, will that controller work ?
Yes the kt 432pt synchro touch should work. One the subs mentioned the flysky its4 being cheaper and the same.