How to Build a Crossbow Rack and a Bow Rack
Vložit
- čas přidán 11. 09. 2024
- This video is kinda long but I have had requests to do a detailed video on how to build a Crossbow Rack and also build a Bow Rack. So in this video I build both at the same time to show the difference. This is a very unique rack and really looks good once you get the arrows in it and hang it on the wall. This build “other than time” is a cheap project to do. It only take a couple of dowel rods and a small piece of 1/4 inch plywood. Thanks for watching!
I’m about to go to Lowe’s right now. Just made some notes for the build.
That is a great project, I have been trying to figure out how to mount my bows to look like a wall art and that works great. Thank you for posting that video keep up the good work...👍
Nice job. Smart idea to make that template so you’ll be ready to make more the next time. Looks great!
Becky thanks!
The 2 long board cut at 25 and 26 1/2 inch then cut a 39 degree at the end of each of those boards?
Nice bow rack looks good
Collin Shell thanks
Great rack! Def subscribing.
Thanks. They played a Dem Jon Ossoff ad on your channel Lol. Hollywood Jon Ossoff
I really like this design. I built two but modified it more from your original design. If you're interested I could send you pics if you want
I'm building one very similiar to 18 arrows. Maybe you can help me with a tip: How did you managed to set the bolts on the correct angles?
Do you know where I can find any stencils of a buck that would perfectly fit this build?
These are so nice! Are they available for purchase? Would it be possible to do a single rack to accommodate 1 crossbow and 1 compound bow with a combo quiver to hold both bolts and arrows?
Really hope this gets a response, just realized this was posted 4 years ago.
What's the dimensions for the crossbow one
How many degree angle was the angle cut? thanks
Jackson Lloyd the two longest pieces the angle is 39° at the bottom. The top and the rest of the angles are 25°
@@PoposWoodworks thank you going to build one when I get the material to do it
im a15 year old boy and im work in a wood factory but i dont know how to find the sinter of a peace of wood. so i woundered if you have any advise or tricks you can show or tell me that would be helpful for me to learn
daniel toburen All I do is measure the thickness and divide by 2 to find the center. There is an easier way tho. If you go on amazon.com search wood centering tool, you will see options for finding center on square lumber and circles. They aren’t that expensive and could help you a lot.
ok thank you for the info and im going to try it on my next build also i like the way you built the bowrack and i tryed to do it with oak but it didn't turn out very well so i use a whitewood and it looks a lot better
What are the measurements of the bow rack? (For 3 tier)
Can u make a rack to go on a motorcycle to hold a crossbow
Simple and practical. Question how do you establish the initial width of the base triangle?
Cindy Peterson I measured the length of the bow, or where I wanted the to points of contact where it would hang. Then I placed 2 2x4’s on the table and made the triangle. Once I got the distance of how wide it needed to be, I marked it with a pencil and cut the rest off. “You can lay the 2x4’s out and set the bow on top of them to make sure you have the right distance or angle”.
I checked a lot of handbooks with woodworking plans. Instructions from woodprix are the best I think.
It's good to see Woodprix have new instructions to save my money and energy to build it.