How to fix window on Audi A6
Vložit
- čas přidán 18. 01. 2018
- You can buy the part here: amzn.to/3m4j5R5
If this video helped you fix your problem and save some bucks, then support our channel! Any size donations are welcome!!! Its simple and quick just click the link and select amount.
www.paypal.me/GarageBoysSupport
Or check my store here:
/ @garageboys
Don’t miss the chance to be a proud supporter of a good cause!
Also like and subscribe
-----------------------------
This video will show you how to fix the window on a Audi A6. in the video we are working on a 2001 Audi A6 but this should work on any Audi A6 between 1998 - 2006
the average time for this fix is about 35min. and the tools required are the following:
flat head screwdriver, phillips screwdriver, Torx T45, Torx T25, Torx T20 and a skinny screwdriver just to push a cover off.
you will need to replace 2 plastic parts on each window to fix the issue.
part number is # B0-837-463-B
you can copy and paste the part number on google and purchase it online or try the dealer they carry it for $27 each
if this helped subscribe to our channel
for Business inquiries email me at: Garageboys281@gmail.com
Disclaimer: Due to factors beyond the control of GarageBoys, I cannot guarantee against improper use or unauthorized modifications of this information. GarageBoys assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. GarageBoys recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of GarageBoys, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not GarageBoys. - Jak na to + styl
Thank you so much for this informative video. It really saved me a lot of time - and money, thanks to your tip on sourcing the clips from an eBay seller instead of the dealer.
Well done and easy to watch! Thank You!!
I’m glad I was able to help!
great video, fixed in my AUDI A3 8L1, its very much the same as in this video.
Thanks for showing this. I 3D printed the part and used it on my Audi A3. The window can close fine again.
Yes!!! My a3 window goes down and mostly up and makes a cracking sound I think this is what’s wrong with it. I was also hoping to 3D print my own replacement on my ender3 was it the same as the a6 or different ? Do you have a thingyverse link please
Do you have a project of this part so I can 3d print it too? Please!!!
@@GajderStudio www.thingiverse.com/thing:1057567
Thanks wery much you help me a lot!
good job. did it without a problem. much thanks!!
Awesome! If you can please like and subscribe
Thank youuu i fixed my car by your video 😍😍
I’m glad we could help! Please help us back by subscribing
Great video. I fixed my window this week end. It works fine. Thanks.
Im glad I was able to help! If you can, help back by subscribing and liking :-)
will you fix mine :) haha
Nice one lad!!!!✌️
Is it necessary or recomendable to disconnect the battery while disassembling?
To ease the installation of the carriers you might want to move the "tabs" on the cable up in the frame a bit by raising the window an inch or two. Obviously the window won't move but the carrier tabs will move away from the wheel at the bottom of the frame. Trust me it will make sense when you attempt to attach the carriers.
was going to suggest the same thing, even an inch helps a ton.
Where do u get a new wire from
Thank you for the video, i liked so much, just a pity that you didn't show how to insert the two new pieces and how to put back the frame in the door
I’m sorry, I decided not to because it’s the same process but in reverse. I just wanted to keep the video short for my viewers
@@GarageBoys anyway is a great and ultra useful video! Next weekend i will take my notebook close to my car and i will try to follow your steps. Tnx again. Grazie
Any idea does these parts fit into back doors too? My a6 c5 allroad back window goes down but wont come up...
Not sure, you can call the dealer and ask for your part number and see if it matches this one or you can remove yours and compare it to the one I have on the video.
My Window Will only Close about half, could the fix In your video also fix that? Or is it only if it wont go up at all?
Next time try to do it during the day 😉
Will it work on 2008?
Really wnana try this but I'm worried il fuck it up lol
What does rear window repair look like? Is it the same?
should be about the same
But I removed my motor and turned switch on but it turns only one way even tho ai pressed button both ways.
I but in new motor and the same problem.
I ordered parts on ebay to do this job, the wires are not the right ones.
-anyone got the correct parsnumber, please?
Thanx
I don’t have the part number for the wires but call your local dealer and ask them. They will give you that information in minutes
Biggest issue I had was breaking my window on something 😭
Thank you very much. In my car it is rear driver side door. Is part number same for rear left door also (B0-837-463-B )? Thanks
It should be the same, but what you can do is call your local Audi dealer and ask them. They should give you the correct answer within minutes
dude part number is : 4B0 837 463B
Well I got my part number straight from the Audi dealer. Look at the invoice @min 1:28
the 4 before the B in previous column is belong to part number. just last week got the part from audi Germany ( I have the same car ) and thanks for sharing )
Lol..u went on eBay. U definitely get wet u pay for. Those aren't going to last, we can see the extreme low quality of the plastic mould when you show it in video. I've been replacing these for many years, I ***ONLY***use the expensive dealer ones. There's none better
Mine are still working fine no issues, but thanks for your input