VW Golf MK7 aluminum pedal covers replacement
Vložit
- čas přidán 27. 08. 2024
- Removing stock rubber pedal covers and plastic kick panel (foot rest) on Volkswagen #GolfMK7 and replacing with aluminum #tuning pedal covers set from AliExpress. This modification takes about 20 minutes of your time and requires flat screwdriver and prying tools.
Acceleration pedal cover fits on the original one. Make sure that the rubber holders are placed correctly and the cover will not detach during driving.
Factory brake pedal cover needs to be removed by pulling on one of the sides. New one needs to be pressed in place.
To remove foot rest panel you need to remove hood lever lock and the lever itself, then remove small screw from underneath. Grab the doorstep cover firmly and pull it upwards to release it. Now you can remove plastic cover that is covering part of the kickstand. With this access you can undo the original plastic one and replace it with aluminum part.
Buy on AliExpress (ref): s.click.aliexpr...
Most likely this set of aluminum #pedalCovers will also fit Audi A3 8V, Seat Leon 5F, Skoda Octavia A7, Volkswagen Passat B8 and few other VAG cars.
mr-fix.info/
Facebook: / mrfixpl
Instagram: / mrfixpl
Pinterest: / mrfixpl
Instructables: www.instructabl...
Thank you so much! Yes, the gas pedal was tough to put on! Thank you for being so honest because it felt good to know that it was not just me!
Happy to help!
I've been messing with it for about an hour and I still can't get it on. Any tips?
I just did this. Thank you!!!
One thing to note, is that you can slip the little locking clip inside the hood latch handle back into place before you press the handle back into place in the last step.
Also! The trim has little metal locking clips that can come out. Make sure those go back into their little clip holders before you press the bottom door trim back into place. Fun little upgrade! Took no time at all, and everything just worked.
Thanks again!!
Happy to help and thanks for your input!
Cool guide, helped a lot, thank you! Quick key notes as seen by me. Clutch and brake: remove rubber, add new metallic cover. Gas: nothing to remove (ha!), just add the metallic cover. Good to align it at the bottom and slowly work all the way up. It should hold snugly. Foot rest: Removal - just follow the video, it will guide you absolutely perfectly. Reassembly: As others said, put the locking element back into the handle and just click it on, there is a bezel made on the peg just for this easy way of assembly. All in all - easy procedure. Looks a bit more difficult than it actually is. Make sure you don't work in subzero temperatures, it makes all plastic and rubber too hard to work with.
For the gas pedal, start at the bottom and slowly slide it up and into the rubber track. Was the easiest one with this method, was recommended by another commenter.
Thanks for the tip!
Thank YOU! This took me 5 minutes thanks to you
How do I start at the bottom and slide it up? I can't manage to get the rubber onto both sides as I slide it.
For the gas pedal soak it in boiling water for a minute or two and it loosens the rubber and makes it so much easier to
Jak zwykle niezawodnie i pomocnie, jesteś głównym pomysłodawcą moich modów G7.5
Thank you for the helpful video I fit the footrest without remove the panel it have enough space to do the job and the accelerator pedal was the easiest you just have to fit the rubber from the bottom of the pedal and slide it bottom-up and that's it it took me 2 seconds to fit just a tip Skoda Octavia 5e combi
👍
I have to try it again and with some lubricant. I spent more than two hours and my all body was destroyed 😅 , but I was not able to fit right upper corner. So it holds only for 97%. And yes I also tried your way from bottom up.
Yes, same. Just needed thick gloves and a good yanking. No need to remove panel.
Thank you for a great video. I need to remove the dead pedal in my GTI to pull back the carpet. This was perfect.
Super návod moc děkuji hotovo měl jsem strach ale úplně na pohodu :)
Happy to help!
Great instructions, just what i was looking for for installing new pedal covers on my '15 golf tsi
Thank you. I didnt disassembly the entire plastics for foot rest. Just remove the screw and with hand move upper the plastic and remove the footrest. Easier and faster
Many thanks for you kind help!!! I managed to replace all of these by myself. It was too useful!!!
Happy to help!
I removed that little plastic thingy from the handle but the handle would not budge at all!! I couldn't remove the panel but fortunately you can bend it sufficiently to get the foot rest in there.
Great vid! Just installed mine. Followed your video and THTuning's vid. He did not remove the side panel since there is enough flex to get the dead pedal out.
Greetings from Canada :D
i need the link for ThTununings videos?
I had an absolute nightmare fitting the accelerator pedal cover and ended up using some quick detailer, spraying a little bit onto the edge of the pedal to lubricate it. The pedal cap then slid right on. Hopefully this helps someone.
Don't go overboard with the detailer though, you don't want any nasty residue.
Thanks for the tip!
Tried this an it did not help in any way. Are there any other methods?
@@masonclifton5236 May by some silicon or wet soap? I'm also desperate.
I propose to easy heat it. I did and it was simple to mount it
How to get back that little thing that you took first for hood handle
Thank you ! It helped me to instal mine on my Audi A3 spoetback 8V.
Just the left plastic along the door can’t be remove as it’s one entiere pièce compare to the video. Still i succeed without struggling.
Glad you worked it out!
You do not have to remove all the trim panels for the dead pedal.
Thanks for the tip!
Hey I recently bought a 2016 Golf Mk7 Variant Highline (1.4 liter petrol 125 horsepower). It has the standard brake, acceleration, clutch pedal and foot rest. My question about the product in your video is, how is the quality after say a year of daily use? Is there any noticeable wear off to the pedals or are they in excellent condition and it might not be something to worry about?
Still looks very good. Foot rest is little bit scratched but overall very happy with the quality and visual effect.
@@mrfixpl alright, thanks!
cheers mate
✌️
Very God job 🙂 great video.
What kind of doorseal protection do you have? Also from Aliexpress?
I just got these pedals for my right hand drive Seat Ibiza - it’s brand new and I need to be as strong as Arnie to pull my brake pedal cover off 😂😂
Dzięki bardzo za instruktaż, dlatego poszło szybko i sprawnie. Wygląd jest o niebo lepszy. Kosztowało mnie to 48 PLN z przesyłką Pozdrawiam.
Cieszę się, że pomogłem!
Does these fit to skoda oktavia 2016 (3)? Thanks!
Witaj.
Czy robiłeś może już adaptację skrzyni biegów multitronik 0AW, w Audi. Jeśli tak czy możesz zrobić taki materiał. W internecie można znaleźć tylko opisy. Nawet na zagranicznych forach, nie ma filmu jak to zrobić. Kiedyś próbowałem z klonem vcds i coś mi go wywalało.
Did you notice the break pedal too High from acceleration pedal so can i make in same level ?
How does it hold after couple of monts/years?
En un tiguan mk2, se hace igual? Gracias
Thank you soo much it really helped
Does the dead peddle slide down or just clip in?
There's a clip, i believe.
There’s a clip
will this work on a right hand drive
Other than the dead pedal, it should be the same.
What is the differents between the original pedals please ?
Mostly price tag.
@@mrfixpl apart from the price ?? :) haha
@@andyalfieri8948 original is alloy, this one is steel
Is this also the same replacement for vw polo 2018?
Can you fit these to a VW golf mk7.5?
I believe it will fit.
Eu coloquei só levantado o plastico
Are these suitable for Volkswagen Golf variant 2019?
I have 2016 Variant and I believe that there’s no difference between it and 2019
@@mrfixpl Thanks a lot!
Why didn't you remove the gas pedal cover before fitting the new one
I believe you cannot remove the gas pedal cos it’s fixed. The new pedal covers over.
Czy te nakładki będą pasowały do fabii 3?
Chyba są trochę inne. Ale na AliExpress da się znaleźć wszystko.
Does anybody know if Mk7 golf aluminium pedal fitting is same for mk3 2016+ skoda superb fitting?
Do you have link to purchase this?
I think iz does
w golfie to jakoś elegancko wszystko idzie ale w seacie niech to h..j strzeli, jeden plastik który trzeba częściowo zdemontować by można było nakładkę odpowiednio wcisnąć ale wez pózniej to dobrze zmontuj
Zrobiłem... Masakracja 😂 Ale ta spinka tej klamki to masakra, nie założyłem jej spowrotem bo 'sie nie da' pozdrawiam
zakłada się łatwiej niż wyjmuje. Wkładasz ją do klamki, a potem klamka się zatrzaskuje na ośce.
@@mrfixpl okej bede próbować 😁 dzięki za odp.
Zamieniam moje CC na Mk7 za 3 lata. Zdecydowanie😉
👍👍
✌️
Fajne 😉
iwas about to press like but itsays 911
Should be 912 by now 😄