WHEN THE NEWER ONES ARE IN THE SCRAP YARD THESE WILL STILL BE GOING STRONG MOST UNDER RATED MUSTANG EVER V6 IS THE BEST CHOICE FOR FUTURE GAS PRICES AND SIMPLICITY OF REPAIR.. LAST OF THE REAL BUILDABLE CARS TURNS HEAD V8 OR NOT. SPENT A FEW GRAND ON MINE GOING FOR PAINT AND ILL REBUILD THE V6 IF THE TIME COMES STILL DRIVES LIKE NEW..
i got a 97 mustang v6 named vanessa and she has over 300k miles original motor original trans hell it has the original starter. i beat the piss out of it every day and she still runs perfect.
Holy crap!!! That sounds good af!! I have a 98 V6 with pypes true dual exhaust, and while I like how deep it is, it sound no where close to this...been looking for headers, but can’t seem to find any unfortunately
Oh shit! I think I like these better than my current mufflers (Pypes M80's). These produce more of a rumble, not smooth note like the M80's.👍🙂 I have longtubes, no cats, & exhaust dumping before the axle.
Appreciate the video. Cant stand the raspy V6 in Chevy or Mustang. Good to know theres the Flow Master 10 and muffler delete option. Got a little rasp in there, but hella better.
Sounds great. Wish I could make my 2003 V6 sound like that. Probably wouldn't pass emissions. I also love those 15" wheels. I want a set of those before I need to replace my tires. I hate huge GHETTO PIMPMOBILE REEHUUMS with 1" sidewall tires. If I had 15" wheels I could put RWL BFG Radial T/As on them.
I've got one high flow cat cause the one that was on it was bad, an I got one OE, original cat, been wanting to get another high flow cat but at 300$ a cat, I anit got it....
Hey, I am gettin the same exact car, 1997 V6 3.8L, and I love the way your car sounds. How much did this exhaust system cost you for it to be installed?
Did you replace the stock cats? If so what did you get? This sounds AMAZING!!! I’ve got an 04 3.8L and have spent weeks researching different muffler set ups and this by far sounds the best!!
Passenger side is a high flow cat and the driver's side is a original cat. I've been wanting to get a high flow cat for the driver's side..but at 300$ a cat...it's not been in my budget
Nice set up Chris :). Which Flowmaster super 10's did you use? I see several different ones on Amazon. I wanna buy the right one and bring it to a muffler shop for install.
FM super 10s one chamber...stock shorty headers stock cats 2&3/4 true dual exhaust to two 3 inch rolled tips is my set up....No H no X true dual exhaust...800$
That was a very nice sounding Mustang you had Chris, sorry about you being t.boned. Question for you; are you sure your pipe was 2-3/4"? Reason I ask is that every muffler shop I've gone to within a hundred miles tells me they can't bend anything bigger than two and a half inches.
It's OK, a 1998 gt in my future and gonna put this exhaust on it....2&3/4 true duels, Flowmaster super 10s and pair of 3 inch rolled tips...I think the gt will sound better.
Yes she is still all stock and the hole new exhaust system was 800$ two high flow cars and true duel 2 & 3/4 inch pipe and 2 super 10 flowmasters and 2 three inch rolled tips. And the rest is stock. 3.8
Stock shorty headers. Stock cats. 2 & 3/4 in pipe...two flowmaster super 10s mufflers...two 3 inch rolled tips....bone stock 3.8 v6 only thing I've added was a k&n airfilter.
Esta en stock bro lo que pasa es que tiene tuberia y creo nose ve la H o la X tal vez las tenga directas asia los flowmaster y mas porque son la serie super 10 son los mas ruidosos.. suena como v8 pero todos sabemos que un v8 suena mas grave pero ese sondio que sale parece v8 se escucha bien ese v6
@@hector98710 ve con los famosos mofleros ellos tienen, ya que yo aka donde vivo fui con uno normal y me dijo que no manejaba tuberia, me mando con otro y es asi como encontre quienes manejan esas tuberias pero eso si son caras hay veces que sale mejor ir alos yoonkes, desguasaderos de autos me he topado mustangs con buena tuberia de 3".... si quieres buscar en liniea sale mas caro bro tienes buscar que diametro te apetese como 1" o 3" el tipo del video lleva de 3" y en esto conviene mas ir a buscar si sale bro... en liniea te va salir mas caro yo lo iva ha ser pero mejor fui a buscar y salio en un taller aka en mi ciudad...
@@applepoop10 yes love the fox platform but that engine gots to go.but inline are a different story from a v6 I once had a R33 in-line still wasn’t happy you just can’t beat a v8.
Takes 1st place for best sounding v6
2:35 is what you came for
5:20 revving
Nah I came for 5:20
Wow! That's the best sounding 6 cylinder I've ever heard!
Sounds awesome bro. Beautiful paint and color as well
Had two 95s with true duals and a 2000 ...they all sounded good . This one is excellent also
The best sound for a V6 🔥🏁🤌🏻 that's sounds insane
I got T boned..she's dead now
@@chrisb3780 no way!!! So sorry to hear that man. Where do you live?
That is hands down the best sounding six I have ever heard
Check out my newest video
Sounds great. One of the better v6 motors i have heard
Super cool. I just bought a 1998 mustang for 700$ to learn manual. Definitely will have to do this!
Bad choice to learn . Lzzzz
@@handduggraverdronline how is that a bad choice to learn in?
700$? Goddamn that's a great deal.
@@PhilMante must be fucked up somehow
God damn that sounds beautiful
WHEN THE NEWER ONES ARE IN THE SCRAP YARD THESE WILL STILL BE GOING STRONG MOST UNDER RATED MUSTANG EVER V6 IS THE BEST CHOICE FOR FUTURE GAS PRICES AND SIMPLICITY OF REPAIR.. LAST OF THE REAL BUILDABLE CARS TURNS HEAD V8 OR NOT.
SPENT A FEW GRAND ON MINE GOING FOR PAINT AND ILL REBUILD THE V6 IF THE TIME COMES STILL DRIVES LIKE NEW..
Waoh take a chill pill dude.
@@misfiringpistons ANY QUESTIONS?
Beautiful car! Can’t wait to get my 03 mustang gt ❤
It's sounds like a freaking good! It doesn't sound like a V6 at all.
Clean mustang the Pacific green color has always looked badass on thos mustang
Agreed. Pacific Green is one of my favorites.
Very nice. Nice job on keeping those rims clean.
Check out my newest post
97 v6 mustang exhaust.
Take a look at...97 V6 mustang exhaust clip....
I do have to admit I was never a fan of those wheels but damn they look good on that car I have the nice five spoke star wheels on my 95 vert
Nice exhaust sounds great! 👍
Sound good man. Just inherited moms 2001 V6 and I figure I’ll make the exhaust a little better, if it sounded like yours I’ll be happy!
sorry for your loss man but i’m sure your mom would love it
I have an 03 V6 3.8! I want this exact sound for mine.
i got a 97 mustang v6 named vanessa and she has over 300k miles original motor original trans hell it has the original starter. i beat the piss out of it every day and she still runs perfect.
ur car is beautiful an sounds amazing mine looks the same but with tan interior
Holy crap!!! That sounds good af!! I have a 98 V6 with pypes true dual exhaust, and while I like how deep it is, it sound no where close to this...been looking for headers, but can’t seem to find any unfortunately
If you’re looking for long headers, look on tdot performance they have PaceSetters reasonably cheap
I'm only running stock shorties
nice paint job,
Feel free to check out my other videos.
Sounds real Good. 💪🏾
Oh shit! I think I like these better than my current mufflers (Pypes M80's). These produce more of a rumble, not smooth note like the M80's.👍🙂
I have longtubes, no cats, & exhaust dumping before the axle.
She sounds like a Chevy 4.3 with super 40s I love it
Appreciate the video. Cant stand the raspy V6 in Chevy or Mustang. Good to know theres the Flow Master 10 and muffler delete option. Got a little rasp in there, but hella better.
Impressed man 👍
Clean man!!
Sounds great. Wish I could make my 2003 V6 sound like that. Probably wouldn't pass emissions. I also love those 15" wheels. I want a set of those before I need to replace my tires. I hate huge GHETTO PIMPMOBILE REEHUUMS with 1" sidewall tires. If I had 15" wheels I could put RWL BFG Radial T/As on them.
I've got one high flow cat cause the one that was on it was bad, an I got one OE, original cat, been wanting to get another high flow cat but at 300$ a cat, I anit got it....
Shit looks clean af
I need this exhaust set up this sounds perfect
800$ system
Car sounds great
Thanks check my newest video..I had a header leaked but got it fixed an added a CAI....
That sounds surprisingly good. Not being rude, but you rarely hear a V6 with that low of a rumble. Sounds good!
Sounds good!
Cool car
So clean!!! Congrats!!!
Thanks...feel free to check out my newest video...from 3 weeks ago...
Nice 👍🏻 looking car ❤
Man this shit sounds good
That's gonna sound sooo good all the way at the BACK
Rev your 170 HP V6! Sounds pretty good.
Do you plan to make any videos with the Escort behind the Mustang?
Sound 😍😍😍😍😍😍😍
Hey, I am gettin the same exact car, 1997 V6 3.8L, and I love the way your car sounds. How much did this exhaust system cost you for it to be installed?
800$
Did you replace the stock cats? If so what did you get? This sounds AMAZING!!! I’ve got an 04 3.8L and have spent weeks researching different muffler set ups and this by far sounds the best!!
Passenger side is a high flow cat and the driver's side is a original cat. I've been wanting to get a high flow cat for the driver's side..but at 300$ a cat...it's not been in my budget
I want to go with long tube headers and high flow two high flow cats.
But I don't want to replace the starter every 6 months
And I want a SR cold air intake.
Nice set up Chris :). Which Flowmaster super 10's did you use? I see several different ones on Amazon. I wanna buy the right one and bring it to a muffler shop for install.
FM super 10s one chamber...stock shorty headers stock cats 2&3/4 true dual exhaust to two 3 inch rolled tips is my set up....No H no X true dual exhaust...800$
I have a 99 3.8 with stock headders with no cats and glass packs and 3 inch tail tips ...how can I make mine sound like this
Can you tell me where i can get the same exhaust set at? I have the exact same model and that will go well with the turbo kit i just got
I got a 2003 3.8 convertible.. only looks different on the motor is the intake manifold..
Heads are different also
How much did you pay for your exhaust im interested in doing that on my mustang instead of straight piping
That was a very nice sounding Mustang you had Chris, sorry about you being t.boned.
Question for you; are you sure your pipe was 2-3/4"? Reason I ask is that every muffler shop I've gone to within a hundred miles tells me they can't bend anything bigger than two and a half inches.
It's OK, a 1998 gt in my future and gonna put this exhaust on it....2&3/4 true duels, Flowmaster super 10s and pair of 3 inch rolled tips...I think the gt will sound better.
It almost sounds like my 2002 GT on idle
Hey man, did you do these upgrades from stock? And how much did it all cost if you dont mind? Thanks
Yes she is still all stock and the hole new exhaust system was 800$ two high flow cars and true duel 2 & 3/4 inch pipe and 2 super 10 flowmasters and 2 three inch rolled tips. And the rest is stock. 3.8
800$
Yes stick motor with shirty headers and high flow cars......
Do you still have the escort?
❤️
What’s your whole set up? It sounds like a 5.0
Is it an iron block or an aluminum block?
sick of exhaust videos but no revs
Sounds like a v8
Thanks that's what I was going for...pretty good for a little 3.8 bone stock
That’s because it’s an iron block V6 and not aluminum.
@@applepoop10 I see I see
What’s your Exact setup?
I wanna hear the other car buddy
does it has cats?
Stock cats or high flow cats? I see you say both in different comments so I'm not sure
One cat was busted so I replaced it with high flow..but the other one was still good...that's what I meant to say...sorry for the confusion
I want to put both high flow but at 300$ a piece it's kinda expensive
You would be from North Carolina..
WHAT'S THE EXACT EXHAUST SETUP YOU INSTALLED??? (U CAN PM ME)
Stock shorty headers. Stock cats. 2 & 3/4 in pipe...two flowmaster super 10s mufflers...two 3 inch rolled tips....bone stock 3.8 v6 only thing I've added was a k&n airfilter.
@@chrisb3780 IS IT TRUE DUAL CATBACK PIPE?
@@landonanders7534 yes cat back pipe.
@@chrisb3780 OK. THANKS!
@@chrisb3780 WAS IT STRAIGHT PIPE? DID U PURCHASE IT ONLINE?
Did you delete the resonator?
No
Very nice what kind of midpipe do you have
I only got shirty headers and two high flow cats back to two flowmaster super 10s and two 3" rolled tips...no mid pipe. And my pipes are 2 3/4
Thanks
Sound kinda like an ole 4.6 f150 motor🤔
What kind of cats you have on it?
One high flow one stock
You all check out my newest video
explícanos algo sobre el motor de ese mustang
Esta en stock bro lo que pasa es que tiene tuberia y creo nose ve la H o la X tal vez las tenga directas asia los flowmaster y mas porque son la serie super 10 son los mas ruidosos.. suena como v8 pero todos sabemos que un v8 suena mas grave pero ese sondio que sale parece v8 se escucha bien ese v6
@@hugonandez9305 dónde puedo conseguir una tubería así que me llegue a México sabes bro ?
@@hector98710 ve con los famosos mofleros ellos tienen, ya que yo aka donde vivo fui con uno normal y me dijo que no manejaba tuberia, me mando con otro y es asi como encontre quienes manejan esas tuberias pero eso si son caras hay veces que sale mejor ir alos yoonkes, desguasaderos de autos me he topado mustangs con buena tuberia de 3".... si quieres buscar en liniea sale mas caro bro tienes buscar que diametro te apetese como 1" o 3" el tipo del video lleva de 3" y en esto conviene mas ir a buscar si sale bro... en liniea te va salir mas caro yo lo iva ha ser pero mejor fui a buscar y salio en un taller aka en mi ciudad...
Them tires wouldn't break loose if it was on a ice patch
My old automatic 2001 v6 mustang broke both tires loose with traclok lmao
@@larrywelser4306 mustve been some really really old worn out tires
2 1/2 or 3 inch for the super 10 muffler?
2&3/4 in true duels an Flowmaster super 10 all the way back to 3inch tips...
An got them taking g off the hole system and gonna put in on a 98 4.6 v8
I got Tboned in the v6
Wait November 1,2017 or 2018?
2018
get a terminator cobra there cooler hell a 99 GT would be cooler than that my 99 GT v8 has flowmaster 40s and sounds great
Not bad but still wouldn’t want a v6 mustang.
So I guess you don’t want an 3.3L inline 6 foxbody mustang.
@@applepoop10 yes love the fox platform but that engine gots to go.but inline are a different story from a v6 I once had a R33 in-line still wasn’t happy you just can’t beat a v8.
Engine swapped
No still stock 3.8 from the factory...back in 1997.
@@chrisb3780 😂
This guy sounds 8k years old from cigarettes and is outa breath waking around the car.
Ruined my pants
What a piece of shit. Keep your v6s stock. Even the 4.6 is not the best motor but it produces a nice tone
@you rod
It's for sound you pumpkin
That paint is beautiful. Would you happen to know the paint code?