Products recommended in this video: Heating Platform: bit.ly/3wJj3mC Soldering Iron Station: bit.ly/3fWvTby Reballing Platform: bit.ly/39ZaKJX iPhone Motherboard Repair Training Book (REWA Exclusive) : bit.ly/39ubIOy More Repair Cases, Please Move to: bit.ly/3d7pQz7 For more discount, you can contact our wholesale team: shop.rewa.tech/wholesale.html
but if you buy from rewa they steal your money and they don't send you anything I lost almost $ 250.00 and they never sent anything and claim they became idiots
Finding the cause is just part of the diagnosis process, with a little experience as well. You need to split the board to check components, in the process you can visually see the pads are missing 😃
Hey, I have a question. Wouldn't the missing bonding pads that are made with copper wire also bei recreated while reballing? Just for my understanding purpose..
generally not reliably, you can see in the video how the via that connects to the pad (where you solder the new jumper to) isn't center. The solder will form into a flat oval shape, this may make contact with the pad, however the bonding surface area is very small and is likely to crack in the future.
@@Slot1Gamer ahh alright I get the point, altough I didn´t thought that the bond would be too weak. But I don´t have any experience at all with that.. Thank you :D
You know, REWA is more experienced than Apple's own technicians who can only play lego :p (yes, lightning port is broken but apple need us to change the whole board)
Assuming you've already disconnected all other attachments: 1.) Inspect the board for abnormalities. (Corrosion, missing or damaged components, bending of the board itself) 2.) If okay, connect the device to the computer to see if it is detected. 3.) If it detects, attempt to restore. 4.) If no, disconnect all connectors. 5.) Attempt to boot the device with the DC supply. 6A.) If it is drawing normal supply voltage, then power off, reattach one disconnected flex cable, then attempt to boot. Repeating this process until you come across the flex that is causing the device not to boot. 6B.) If the voltage stays at 43Ma, then the next step is to separate the board layers. 7.) After separation, attempt to boot the phone board. 8A.) If the boot current is normal, then your issue is with the RF board. 8B.) If the Phone board still does not boot then you'll need to begin a standard "No Power" board troubleshoot. Which is Power, Clock, Reset and Enable signals. ypyconnect the phone board to one by one. Boot then the issue lay with on of the connectoris mp
Products recommended in this video:
Heating Platform: bit.ly/3wJj3mC
Soldering Iron Station: bit.ly/3fWvTby
Reballing Platform: bit.ly/39ZaKJX
iPhone Motherboard Repair Training Book (REWA Exclusive) : bit.ly/39ubIOy
More Repair Cases, Please Move to: bit.ly/3d7pQz7
For more discount, you can contact our wholesale team: shop.rewa.tech/wholesale.html
These guys are better at repairing than the manufacturer themselves
U r right ..👌👌👌
Thank you Sir. It's very kind of you to say so. We will keep up our work.😘
but if you buy from rewa they steal your money and they don't send you anything I lost almost $ 250.00 and they never sent anything and claim they became idiots
احسنت استاذ شرح جدا ممتاز واستفدنا من الشرح كان مترجم بالغة العربية فهمنا الكثير من قناتك
شكرا لتعليقك يا سيدي. إنه لطف منك أن تقول ذلك. سوف نواصل عملنا.
what a hand and finger skill? AWESOME!!! 👍👍👍
Yes I came just by watching 🥴
REWA the best
Türkçe altyazı için teşekkür ederim iyi ki varsınız her video Türkçe altyazılı olsa keşke başarılar
It’s amazing REWA Technology
Thanks rewa...
Much appreciated
That’s awesome
Please share video about AirPods/1/2 and Pro mic issues
We'll forward your suggestions to the related team and keep an eye on this issue. Please stay tuned.
Wow! Impressive
How did you figure out that activation problem is related to soldering of the points ?
I think they’re shooting lots of videos w/ invalid attempts until they hit the right choice - and save only one video.
Finding the cause is just part of the diagnosis process, with a little experience as well. You need to split the board to check components, in the process you can visually see the pads are missing 😃
May be fro. Schematics and obviously will have trial and error methods
Great skills!
Good Job
its my dream project
Great Dear Bro Love From Pakistan 🇵🇰
superb 👌
Nice video
Superb
I got the sim problem! Can i send the device from swedento you guys?
Sir please make video iphone 6 or 6s stuck startup processing bar why this problem
Rewa should open apple services center
Rewa should replace Apple "Geniuses" :)))
Make a video on baseband issue of iPhone X Plzz
Nice
Do you still have icloud unlocker?
Hey, I have a question. Wouldn't the missing bonding pads that are made with copper wire also bei recreated while reballing? Just for my understanding purpose..
It would not last so long. The bond is too weak
generally not reliably, you can see in the video how the via that connects to the pad (where you solder the new jumper to) isn't center.
The solder will form into a flat oval shape, this may make contact with the pad, however the bonding surface area is very small and is likely to crack in the future.
@@Slot1Gamer ahh alright I get the point, altough I didn´t thought that the bond would be too weak. But I don´t have any experience at all with that..
Thank you :D
You know, REWA is more experienced than Apple's own technicians who can only play lego :p (yes, lightning port is broken but apple need us to change the whole board)
165 Celsius ? I tried, but the factory tin does not melt at 165 degrees Celsius
why call 10086? any reason.
can you just replace the missing pad with Tin?
Which voice assistant you use
Hola ¿Cómo sabías que la falla estaba ahí?
Traducción ;Hi Whats so fail in ahí?
GJ
Sir my iphone x stuck on 42 amp after pressing power key whats the problem sir plz help
Assuming you've already disconnected all other attachments:
1.) Inspect the board for abnormalities.
(Corrosion, missing or damaged components, bending of the board itself)
2.) If okay, connect the device to the computer to see if it is detected.
3.) If it detects, attempt to restore.
4.) If no, disconnect all connectors.
5.) Attempt to boot the device with the DC supply.
6A.) If it is drawing normal supply voltage, then power off, reattach one disconnected flex cable, then attempt to boot. Repeating this process until you come across the flex that is causing the device not to boot.
6B.) If the voltage stays at 43Ma, then the next step is to separate the board layers.
7.) After separation, attempt to boot the phone board.
8A.) If the boot current is normal, then your issue is with the RF board.
8B.) If the Phone board still does not boot then you'll need to begin a standard "No Power" board troubleshoot.
Which is Power, Clock, Reset and Enable signals.
ypyconnect the phone board to
one by one. Boot then the issue lay with on of the connectoris mp
How does this happen to the iPhone is it because of over heating?
Physical damage, from drop
which soldering iron you using model
wicking - Looks like the T12-11 they have a video on it i think.
jumpers - they used the SUGON T36
I want my iPhone 12 Pro Max activation problem
I want repairing my motherboard
But u dint show how its look like after masking
green color peast name
أين مكانكم أكاديمية ريوا
Hi, there! REWA ACADEMY: academy.rewa.tech/
More Repair Cases, Please Move to: bit.ly/3d7pQz7
I can see his face :D
If missing pad of motherboard of new iPhone it means apple never inspect before sell in market.
I wonder how dropping a phone will result in missing pads🤔
The motherboard separate slightly and the upper motherboard lifts the pad as it separate
fail quality control ??? is it posible??? rip iphone 😭
whoa, i didn’t even know the iphone x does this. what a horrible design.
The 3u tools fucked my iphone 7 it messed with the nand drive and removed the serial no. Now that phone is trash and sitting in closet
When you drop the phone and it cant activate anymore,you know Apple got problem with the dual stack motherboard design
Ya just like it happens to phone ics
my gawd too complicated 😭
look up their error 9 repair video 😂 cut into cpu
😎👌👍👍👍👍