Sir tanong lang po? If halimbawa po di na kailangan ng sd card para ma save yung video po kasi direct na po siya thru hard drive or ssd. Dapat kailangan po ba naka on lang yung pc po para lagi narerecord yung mga past days na dumaan na po? Sana po mapansin po. Salamat
on 4mins of your video, mine is different.. IP address started at the first box.. and at the end after i made my user and password when i click the NEXT it say NO MEDIA ENDPOINT FOUND, can you help me?
Please watch this video and fix your issues, I too faced this issue earlier and now its working good after installing this app. czcams.com/video/N5957H_mgaE/video.html
@@abbykeilreyes2917 Please watch this video and fix your issues, I too faced this issue earlier and now its working good after installing this app. czcams.com/video/N5957H_mgaE/video.html
@@egemencoskun Thank you for your reply,. No, I was doing the configuration remotely. The camera was on different wifi network as compare to my remote location
I had the same problem and i think i have the solution step 1: Dont forget to camera settings -> advanced settings -> camera account -> and fill in your username/password Step 2: Do step 1 to all your camera's or else the ISpy can not register them. So fill seperetly your username/password for each camera. after i did this all my 4 camera's worked
Please watch this video and fix your issues, I too faced this issue earlier and now its working good after installing this app. czcams.com/video/N5957H_mgaE/video.html
@@zidliym9702 i use wifi repeater on my two tapo camera, but my PC is connected on thru LAN on modem. I got "no media endpoints found". how can i fix this? thanks
Dear Sir, I have a question to ask. When the camera connected to PC via iSpy software, do I need the Internet connection for that? Please advise me. Thanks very much! Looking forward to hearing from you soon.
"No media endpoints found." i found that my router run on preferred band (2.4Ghz and 5Ghz) mode and that was the problem (maybe your camera and your pc/laptop have the same network but differrent band).
@@sairam.p9836 I pasted it twice but it got removed for some reason. Now I'm trying to remember what it was I did. I did add the camera with ONVIF. The first time I typed in the network address I forgot to leave in the ":2020" (without the quotes of course). I think the last thing I did wrong was I used my Tapo username and password rather than create a new one. I'm sorry but that's all that's coming to mind right now. I'm going to watch this dudes video again and if I think of anything else I'll let you know.
@@sairam.p9836 OK, so I watched it again and I was right.1. I used the ONVIF. 2. make sure you check your app for your I.p. address 3. make sure you leave in the :2020 part in when entering your I.P. address (network address) 4. make sure you create a user name and password to gain access to that I.P. address (don't use your Tapo account info) 5. Make sure your camera is on and connected to your WIFI. 6. Don't attempt this after about 8 beers. Hope it helped. I'm going to be connecting my RING doorbell to ISPY in a couple of days and if anything else comes to mind I'll be back. Good luck.
When i click next, a box is show: nó media endpoints found! What's error? My cam is tapo c310 When i check again i found the problem, and fixed it. My pass not correct
Please watch this video and fix your issues, I too faced this issue earlier and now its working good after installing this app. czcams.com/video/N5957H_mgaE/video.html
Hello, can you see it in real time, monitor it in real time without having to pay for extra or special functions? I mean, it is already included in real time by default?
I think so. And I've been trying to figure out how to stream Tapo camera remotely on different network, let's say on my mobile phone or laptop away from home. None of the videos in YT provide such a solution.
My tapo camera is only able to use the 2.4ghz wifi band, and therefor I can't add it to Ispy, as I'm only able to use the 5ghz band on my pc. Is there any way I can add the camera to Ispy regurdless of me not being on the same wifi band on pc and camera?
hello I would need to watch the stream from the camera TP link directly in the web browser if I want to watch the stream on PC I normally use VLC player but I would like to use a bookmark in my mozilla firefox it seems more convenient to me
Please watch this video and fix your issues, I too faced this issue earlier and now its working good after installing this app. czcams.com/video/N5957H_mgaE/video.html
I had the same problem and i think i have the solution step 1: Dont forget to camera settings -> advanced settings -> camera account -> and fill in your username/password Step 2: Do step 1 to all your camera's or else the ISpy can not register them. So fill seperetly your username/password for each camera. after i did this all my 4 camera's worked
@@yesyup3453 Same problem here! No media endpoints found. Got username and password. Next to my IP Address i put ":2020" (without the " "), also withoput :2020 and nothing. Help!
Please watch this video and fix your issues, I too faced this issue earlier and now its working good after installing this app. czcams.com/video/N5957H_mgaE/video.html
can some one help me? ..cannot start the wifi on camera with my phone ...i find the signal from camera ..if i click ..cannot connect..if i use lan cable ..its work ...any help?
@@trendmedia9271 I have done that. So nothing is popping up when I first go to the setup onvif camera. I have the menu with no selections. Also I have my cameras setup to 2 different routers on the same network… can that be the cause?
Hi! Its not working for me since I am not connected on the same network with the camera. Currently located here in the Middle East and my camera is in the Phils.
It worked at first, but after I tried to reboot the camera, the network address does not automatically populate anymore. Even i put the correct ISP address, giving me the error no media endpoint found. I tried creating a new camera account, didn't work to.
@@Techlogics no issues with the app and camera. The issue is with ispy. It's not automatically registering my IP address and it's giving me the error message even if I typed it right.
Please watch this video and fix your issues, I too faced this issue earlier and now its working good after installing this app. czcams.com/video/N5957H_mgaE/video.html
you probably have DHCP on you camera. IP would of changed. Or else set static IP on your router for each camera. Then no issues if camera gets updates/reboots etc.
There is a issue encounter (no media endpoints found) after I key in the Network address. I had found some suggestions from reddit, but ist's not work at all. Any suggestions to solve this issue?
I have 3 Tapo cameras and connect to iSpy. 2 of them can run well, but 1 camera can't run and it says "No media endpoints found". Anyone know the problem?
Please watch this video and fix your issues, I too faced this issue earlier and now its working good after installing this app. czcams.com/video/N5957H_mgaE/video.html
@@Techlogics good pm. i got a questions hope you can help. here is the scenario i use wifi repeater on my two tapo camera, but my PC is connected thru LAN cable on modem. I got "no media endpoints found". how can i fix this? thanks
Perfect - exactly what I needed.
Thank you for taking the time to make this video!!!
Sir tanong lang po? If halimbawa po di na kailangan ng sd card para ma save yung video po kasi direct na po siya thru hard drive or ssd. Dapat kailangan po ba naka on lang yung pc po para lagi narerecord yung mga past days na dumaan na po? Sana po mapansin po. Salamat
Wow, many thanks, it works! I've been trying for a while to do this. You rock!
on 4mins of your video, mine is different.. IP address started at the first box.. and at the end after i made my user and password when i click the NEXT it say NO MEDIA ENDPOINT FOUND, can you help me?
having the same problem here as well
Please watch this video and fix your issues, I too faced this issue earlier and now its working good after installing this app. czcams.com/video/N5957H_mgaE/video.html
@@abbykeilreyes2917 Please watch this video and fix your issues, I too faced this issue earlier and now its working good after installing this app. czcams.com/video/N5957H_mgaE/video.html
Same problem..... Do you got any solution?
Same here! :s
perfect... very short and precise solution thanks
You're welcome!
Helpfull. I accidently used my internet account instead creating a local account. It wokrs fine. Thanks.
Excellent job thank you, you made it so easy to follow.
why its the IP add from your phone is diff from the one you copy on the pc
The IP address is unique for each device.
Very very informative. Pc main recording save kar sakate hai kya ?? Pls reply.
I cannot get it connected, It said, " no media endpoints found". Please advise. Thanks
it would not unless you are in the same wifi network
@@egemencoskun Thank you for your reply,. No, I was doing the configuration remotely. The camera was on different wifi network as compare to my remote location
Doesn't work, says no media ends found 😢
same here
Excellent job my guy,you got a subscribe from me and i wish you the best for you and for your family
Hi, it will also work even you are in different country? I can also access the camera in my computer like what you can do in Tapo Apps. Thank you.
help me i am unable to setup this. Its showing no media endpoints found
Hey, see what helped me above.
I had the same problem and i think i have the solution
step 1: Dont forget to camera settings -> advanced settings -> camera account -> and fill in your username/password
Step 2: Do step 1 to all your camera's or else the ISpy can not register them. So fill seperetly your username/password for each camera.
after i did this all my 4 camera's worked
Please watch this video and fix your issues, I too faced this issue earlier and now its working good after installing this app. czcams.com/video/N5957H_mgaE/video.html
@@zidliym9702 i use wifi repeater on my two tapo camera, but my PC is connected on thru LAN on modem. I got "no media endpoints found". how can i fix this? thanks
No media endpoints found is what I got when I tried to put the network address, how to fix???
same scenario, what to do please?
Thank you for the tips. Here everything works perfectly.
Great to hear!
Thanks Really Helpful.
Dear Sir, I have a question to ask. When the camera connected to PC via iSpy software, do I need the Internet connection for that? Please advise me. Thanks very much! Looking forward to hearing from you soon.
ip address does not work, emulated ip address camera and ispy different?
"No media endpoints found."
i found that my router run on preferred band (2.4Ghz and 5Ghz) mode and that was the problem (maybe your camera and your pc/laptop have the same network but differrent band).
how did you resolve this?
Hi, Can you help please? Its showing an error "No media endpoints found."
Hello, see what helped me above.
@@yesyup3453 bro can you paste it here, we didn't find anything above to see please paste here so that everyone will see it
@@sairam.p9836 I pasted it twice but it got removed for some reason. Now I'm trying to remember what it was I did. I did add the camera with ONVIF. The first time I typed in the network address I forgot to leave in the ":2020" (without the quotes of course). I think the last thing I did wrong was I used my Tapo username and password rather than create a new one. I'm sorry but that's all that's coming to mind right now. I'm going to watch this dudes video again and if I think of anything else I'll let you know.
@@sairam.p9836 OK, so I watched it again and I was right.1. I used the ONVIF. 2. make sure you check your app for your I.p. address 3. make sure you leave in the :2020 part in when entering your I.P. address (network address) 4. make sure you create a user name and password to gain access to that I.P. address (don't use your Tapo account info) 5. Make sure your camera is on and connected to your WIFI. 6. Don't attempt this after about 8 beers. Hope it helped. I'm going to be connecting my RING doorbell to ISPY in a couple of days and if anything else comes to mind I'll be back. Good luck.
@@yesyup3453 Thank you so much, i was struggling... i forgot the "2020" part
Working! 2022 Feb 25
Hello thanks for. The video, I can view multi preview panel or only one preview
my camera wont work,,i follw the instruction but wont work
Thanks.... great job.
Saludos desde España!
not working on Tapo C310
When i click next, a box is show: nó media endpoints found! What's error?
My cam is tapo c310
When i check again i found the problem, and fixed it. My pass not correct
Create new account / Edit Onvif password then try again
Please watch this video and fix your issues, I too faced this issue earlier and now its working good after installing this app. czcams.com/video/N5957H_mgaE/video.html
No media endpoint found?
very nice thank you
If the Camera is inserted microSD card and subscribed Tapo Care, RTSP stream will fail / not going to work.. Is it correct ?
Everithing looks fine until 5:53 and nothing happening after (no camera picture)
Camera wirking fine with mobile only
Nice! Thanks for this!
Hello, can you see it in real time, monitor it in real time without having to pay for extra or special functions? I mean, it is already included in real time by default?
I think this for local view only ,is there any solution to view remotely,i think we need staticip for remote view correct me if it's worng
I think so. And I've been trying to figure out how to stream Tapo camera remotely on different network, let's say on my mobile phone or laptop away from home. None of the videos in YT provide such a solution.
If I understand right, I can be at home on my main PC and recording my work place if I make a acc and have ip adress on my work place?
Thank you so muchh! it works!
Not mamking progress here - when i download and click the exe file, it's opening in a browser window? instead of a standalone application???
Brillant! Thank you!
Thanks you, Sir! 👍👍👍
My tapo camera is only able to use the 2.4ghz wifi band, and therefor I can't add it to Ispy, as I'm only able to use the 5ghz band on my pc. Is there any way I can add the camera to Ispy regurdless of me not being on the same wifi band on pc and camera?
Is this for all TAPO ip cameras, including the
TP-Link TAPO C310?
dose it work on TP-LINK Tapo C210 Pan/Tilt Home Security Wi-Fi Camera, cos i have same issue NO MEDIA ENDPOINTS FOUND
thank you very much its working
super thanks!
hello I would need to watch the stream from the camera TP link directly in the web browser
if I want to watch the stream on PC I normally use VLC player
but I would like to use a bookmark in my mozilla firefox it seems more convenient to me
Superb... thank you!
Thank you too!
I'm looking for some help pls.. I have the 2.4Ghz network. Now what do I do next so I could use on my pc windows 11??
Stuck at Network ip Address doesn't work showing No media endpoints found what to do?
Done now. Thanks a lot
Hi help me
No media endpoints found
Please watch this video and fix your issues, I too faced this issue earlier and now its working good after installing this app. czcams.com/video/N5957H_mgaE/video.html
Perfectly Great! ❤💯
OPEN_INPUT: Invalid data found when processing input.. what this mean ?
is it have to remove sd card from camera so that we can perform this cctv on computer?
THANK YOU!
excuss me, can tapo D230S1 be connected to ispy ??
Bakit po kaya di makita ung mismong IP address nung camera. Using po TAPO C310 ung model ng akin.
no media endpoint found absolute waste of time
Its showing no media endpoints found
Hi, see what helped me above.
I had the same problem and i think i have the solution
step 1: Dont forget to camera settings -> advanced settings -> camera account -> and fill in your username/password
Step 2: Do step 1 to all your camera's or else the ISpy can not register them. So fill seperetly your username/password for each camera.
after i did this all my 4 camera's worked
@@yesyup3453 Same problem here! No media endpoints found. Got username and password. Next to my IP Address i put ":2020" (without the " "), also withoput :2020 and nothing. Help!
@@germantorre9649 Successful. Thanks. Need to put :2020 after the ipaddress
Please watch this video and fix your issues, I too faced this issue earlier and now its working good after installing this app. czcams.com/video/N5957H_mgaE/video.html
can some one help me? ..cannot start the wifi on camera with my phone ...i find the signal from camera ..if i click ..cannot connect..if i use lan cable ..its work ...any help?
Thank you so much
Does not work for mee - 2 red wires in the upper right corner
Can I enable motion tracking with this pc software on my tapo camera??
hi i have followed the instructions to the letter but I am unable to access the cameras? Keeps coming up NO MEDIA ENDPOINTS FOUND
yes me too, what are the missing step
dose it work on TP-LINK Tapo C210 Pan/Tilt Home Security Wi-Fi Camera, cos i have same issue NO MEDIA ENDPOINTS FOUND
this is the outdated version for the ispy.. did anyone have the updated version?
If you get "no media endpoits" make sure you create an account on your app. DONT use your TP account info.
Hi, i was just wondering which do i use. im having an issue connecting my camera maybe you can help since i keep receiving this "no Media endpoints"
@@EJSenpai89 You need to create an account on your phone app. Use the account and login details for the Ispy settings.
@@trendmedia9271 I have done that. So nothing is popping up when I first go to the setup onvif camera. I have the menu with no selections. Also I have my cameras setup to 2 different routers on the same network… can that be the cause?
No media end points is related to Account mostly, please recheck
how to do this with different wifi? i wanna see my office from my pc at home
Deu muito certo. Obrigada!
Thank you!!
Thanks!
Is it safe?
Hi! Its not working for me since I am not connected on the same network with the camera. Currently located here in the Middle East and my camera is in the Phils.
same issue. is it working now for you? how did you do it?
It worked at first, but after I tried to reboot the camera, the network address does not automatically populate anymore. Even i put the correct ISP address, giving me the error no media endpoint found. I tried creating a new camera account, didn't work to.
From the Tapo App camera is working / Not?
@@Techlogics no issues with the app and camera. The issue is with ispy. It's not automatically registering my IP address and it's giving me the error message even if I typed it right.
Please watch this video and fix your issues, I too faced this issue earlier and now its working good after installing this app. czcams.com/video/N5957H_mgaE/video.html
you probably have DHCP on you camera. IP would of changed.
Or else set static IP on your router for each camera. Then no issues if camera gets updates/reboots etc.
There is a issue encounter (no media endpoints found) after I key in the Network address. I had found some suggestions from reddit, but ist's not work at all. Any suggestions to solve this issue?
set static IP on your router for each camera. That should work.
add " :2020 " at the end of the ipaddress, i tried that and it worked
"no media endpoints found" not worked
Some here.
Thanks man
i have one question how can i connect in android tv in this camera
i can use pato c100 with iriun camera app ?
Thank you
very nice and simple ;]
Thank you! 😊
I did not found the IP address on C420 model cameras
You may try this way : czcams.com/video/3RNLwJxMm9Q/video.html
no reception all black this doesnt work at all
In my cam, have a alert : "No media endepoints found"
no display just black how to fix?
weldone sir
Thank you
hello how to fix if it says no media endpoints? pls helpp
No media endpoints found
A camera precisa está na mesma rede?
How I can connect my camera with PC but remotely ?
Is the iSpy safe? I' am afraid of security
Bhai video me voice bhe ho to video kitna achchha gage ga
What if we want watching remotely? I mean from another IP
That's exactly the relevant question, this is just silly.
thx it worked
Thank muchly
wow Thank you :)
Where do i find the network adress on may webcam?
I have 3 Tapo cameras and connect to iSpy. 2 of them can run well, but 1 camera can't run and it says "No media endpoints found". Anyone know the problem?
same here
Please watch this video and fix your issues, I too faced this issue earlier and now its working good after installing this app. czcams.com/video/N5957H_mgaE/video.html
i'd add another camera but then it doesnt working
very helpful, thanks very much.. have you also used cloud storage option.??
Not tried
@@Techlogics good pm. i got a questions hope you can help. here is the scenario i use wifi repeater on my two tapo camera, but my PC is connected thru LAN cable on modem. I got "no media endpoints found". how can i fix this? thanks
thanks
not working on tapo c320ws
My tapo C200 is locked with ACT fibernet how to unlock it? Can I get the latest version of firmware of tapo C200?
Reset button available on the camera, you can Reset & configure with new WIFI