Video není dostupné.
Omlouváme se.
Testing a new 2-part style of LED "neon"
Vložit
- čas přidán 8. 10. 2022
- I saw this a while ago and decided to get some to try. It's designed to go into routed channels as a "bendable" LED strip with a separate diffuser section that presses into the routed channel.
Not having a router, I used one of my existing 3D printing scripts to make a square frame with rounded edges.
What you see in this video is my very first attempt at using the materials, and other than having to refine my LED tape laying techniques, it worked very well for a first try (just 5 minutes to complete). The videos showing this material being used in factories, show them using a pointy tool to help dress the LED tape around bends and corners.
For pro users there are two tools for cutting the material. A curved one for the round ends of the routed channels and an angled one for mitres on right angled corners.
There appear to be a few sellers of this material on Aliexpress. You buy the material and LED strip separately, but they choose the matching LED colour for you. The combined price is comparable to the rolls of integrated LED neon strip. It was much easier to terminate the wires on this stuff, and unless glue is used it is probably quite easy to repair sections.
Here's a link to the listing I bought this tape from:-
www.aliexpress.com/item/10050...
Supporting the channel with a dollar or two on Patreon helps keep it independent of CZcams's quirks, avoids intrusive mid-video adverts, gives early access, bonus footage and regular quiet Patreon live streams.
/ bigclive
#ElectronicsCreators
That's the best fake neon yet, advantage being that the LEDs are illuminating directly outward rather than from the side. Quite an innovative strip design which allows bends too.
Neon and blown glass is an art form. Blink open or closed.
@@tomtheplummer7322 it is an art form and priced as such.
@@tomtheplummer7322 watched a guy blowing neon tubes for a display. It is indeed an art. An art that one doesn't see a lot of anymore given the new tech like this stuff now.
@Max Power ah cool so you found a source of blown glass neon tubes?
@@tomtheplummer7322 meh
For me, so many uploads of yours are a learning experience.
LEDs are magic to an electrically challenged person like me. They’re so tiny and low powered, but put out a lot of light for their size. Appreciate your vids Clive. Been watching you for years now!
It looks like the tape has the tracks curving together between the LEDs. You could probably improvise with a single hole punch to remove the plastic in the strip that is adjacent to where the tracks come together to help it flex around bends without having to cut and rejoin the sections of the strip or have it wrinkle up. Might be worth a try to see if it gives a neater way to route it around the corners.
Always glad that you aren't afraid to show the first attempt and any mistakes along the way.
That LED strip is exactly what I've been looking for. Not for the fake neon effect, but deformable across the strip without resorting to a custom PCB. I can now scratch that itch, and also make some personalised signage for family too.
@@topline2554 The substrate of the LED strip being able to be deformed across the strip. I'm not aware of them being able to be deformed in that direction without overstressing the traces prior to 2021. Flex Neon (with the strip mounted vertically within the diffuser) have indeed been around for quite some time but could only be formed in one direction.
What would be nice next, is for addressable LEDs that can be controlled over the power lines and be able to be formed in the same way as these. The problem seems to be overstressing the traces when they lay parallel. (I suspect the conductors lay very close to each other along the midline on these new ones Clive showed here) Maybe one day, the substrate can be used for heat conduction, and the ground, with just a single trace along the midline for power and communication.
@@squelchstuff Are you suggesting that you fdm the power line? You would require circuitry to interpret the modulation, especially if you are using dimming or rgb LEDs, but these LEDs are also susceptible to fluctuations on power rail. There are already individually addressable RGB LED strips available that are flexible across the strip that simply use a dedicated data channel.
@@ollie4022 Yes, modulating the power line was my line of thought. By reducing the number of coplanar conductors, they can be situated close to the neutral bend line reducing the strain. As you rightly point out, there are a number of other complexities to overcome, not least of which is the extra processing to demodulate and demux, and then a noisy power rail which can already cause trouble now. All said, technically possible, but practically, not so easy.
It seems that strips that could be formed in more than one direction went under my radar. It was maybe around 2012 while I was exploring an idea that warranted bending in two planes (spherical surface) I'd largely abandoned and forgotten about it until Clive's video, and this thread has been most enlightening (pun not intended). A cursory search of patents after the revelations show that S-Type/Zig-Zag etc strips appeared sometime around 2015.
@@squelchstuff I mean what you are suggesting may definitely be possible and would result in an even thinner strip. Also, yes, LED strips that are this flexible have certainly not been around for a decade they are a relatively modern invention, however I am unsure as to the exact date.
Pretty cool Clive. Thanks for showing new things.
This looks very good. It opens quite a bit of flexibility for neon-like signs. Very fun.
the warm glow of neon. its a lovely thing
Having worked in factories, can confirm once mastered, it goes fast and easy.
I love these strips! I used them on a Bike Party bicycle powered by a Talent Cell lithium battery. It looks amazing and doesn't kill the battery.
I'm currently waiting for the 10Watt upgrade for my Diode Laser cutter to arrive, then I'm going to cut my business logo ( as per my YT logo ) from MDF and use something like this to backlight it :)
That is blooming impressive Clive, I have to say that this will look amazing in shop signs 👌🏻
This reminds me of all the tiktok videos about "why our signs are so much cheaper than other neon signs"
Very nice display of someone who knows how to slice, but doesn't think too much about the slice. A glorious feeling when you measure to 0.00_ tolerance and fiddle the settings resulting in a smack on tolerance fit.
Looking top notch. Fabulous idea.
Cool as hell, great job Clive. Gratz on getting it in one!
This one looks so sweet, I'm already jealous!
Your videos on this stuff has got me interested in getting some to experiment with. Very good.
My favourite part of your banter is the self deprecation. You’re an honorary Canadian for sure.
Very cool! I love when you do glowy things! Though I love most anything you do on the channel. You make everything interesting! Cheers!
Clive, that is a very good-looking LED lighting system. When you first showed the insert, I was thinking that it looked like some red licorice with two white bands.
I imagine you could use some optically clear adhesive to join the ends of the diffuser cord to help keep the light continuous. Like the kind you'd use to repair/bond a new phone screen.
E6000 is the glue! I love that stuff...
@@rockstopsthetraffic - I've been using E6000 for theatrical type stuff since 1993 or so. It's basically Shoe Goo on steroids, or perhaps a cross between rubber cement and hot melt glue.
This really makes me want to make a design I thought of a long time ago very possible!! Sweet!!
That's very interesting and the led strip is quite nice as well plus the color looks good I like it.
As a signmaker the first 7 minutes to me was just like "why is he working so slow?" Guess that just comes from years of experience. Love the end result though might steal some led strips from work and buy some of that stuff.
Big Clive gettin' kinky with lights! 😻
Great episode as always. 😺🍻
Works great. Looks like a lot of fun. Thanks.
A really nice result!
That’s actually pretty cool. I’m digging it.
That looks so cool. They are getting very close to the look of real neon. :)
Except that neon is cylindrical and emits light 360° around its length... May not seem like a big difference, but when neon is mounted with stand offs, it illuminates the signage under it from the back of the bulb, creating a unique, almost 3D look.
Rev. Clive! Hallelujah! I see the light!!
From your Canadian friends, Happy Thanksgiving!
Thanks-taking you mean.
@@sugarhieroglyph Nope, I can give thanks to all those around me, friends loved one and neighbour’s . Sorry you’re so jaded that you cannot take well wishes at face value. Shalom.
Great, that brings the old nice Neon signs back
Bloody Amazing! And so quick too
There’s so many varieties of this stuff popping up on Aliexpress right now I have been tempted to try some of it purely for curiousity to see first hand and if it’s really as good as they say, so thanks for this video so we don’t have to. The ‘RGB COB LED Strip 24V’ has been catching my attention too! Hinty hint.
Nice project, good job, congrats
That did work very well. Interesting.
That's really cool! Great vid.
For led strips to go around bends there are some specially made for this purpose.
The actual strip is like waves allowing so much to do a perfect 90 degree bend tightly.
Ah, Clive, from one tinkerer dude to another, no weirdness meant, but the way you say "Sharpah" is nothing less than adorable.
Looks really good. Have a great day everyone, from Canada.
Very cool Big Clive! The uses for various shapes of light would be fun. I'm thinking you could make, besides signs or decorative shapes, light rings for photography or ambient up lighting shapes. Sconces. Probably a good thing I don't have a 3D printer! 😀
Not yet you don't....
beautiful contraption
Very cool. Thanks for sharing.
The light looks so beautiful, there's so many applications I can see for useing this, the first thing that popped into my head, was this would make an amazing coaster.
Put a little lithium battery in the middle, make it USB rechargeable or maybe even solar powered, it would look lovely.
Maybe I'll try and make one if I get round to purchasing a 3D Printer 😁😁👍
Well I just bit the bullet and ordered 50m of this stuff for an idea I have got my new studio, thank you Clive
6:15 "that is not bad at all" says BigClive, marveling at his new creation. 😂
Really nice effect. And that diffuser makes me think of strawberry and cream liquorice
Would probably work nicely in a routered groove in wood - furniture, cabinets, cornices, etc.
Or a routed groove in plexiglass
I think this would work great for filling in the T-slot extrusions of a 3D printer!
And ordered some white 8mm and 12mm .. I will try and build a house number sign from it.
Well, chalk this one up to a perfect project from the start to finish! Amazing! I am going to get some to play with!
Love your channel
Thank you Clive that was very helpful and informative, the new tech is getting better and better, well done China for a change.
Well done Clive you've passed your interview, when can you start in our Chinese factory ;)
No. I'd need to do it in 30 seconds to work in one of their factories.
Always love the vids
Routered grooves for LED strips in the underside of kitchen worktops - especially in the overhangs of islands - are getting pretty common now. I could see this being used to give a better overall finish and a more linear output than just leaving the bare tape as is the current norm. It could especially give a really nice effect with an almost clear 'diffuser' style over an RGB strip.
Also useful for the underside of wall cabinets, too.
I like it.... I like it a lot 😁
Well, the bane of shelf LEDs in groves is usually that (a) grooves are shallow and the diffuser doesn't diffuser so well so you see spots from individual LEDs (solved by a more opaque diffuser, or by deepening the groove which is clearly usually impossible sure to the thickness of the woods panel) and (b) terrible thermals of the resulting light - if the LEDs are run bright and consequently hot, being sandwiched in a groove of a very good thermal insulator and covered by a diffuser is not so good for them to say the least.
@@BoraHorzaGobuchul
We mostly deal with 30mm or 40mm thick quartz, granite or solid surface (resin/stone composite) these days. It would be easily routered to take this kind of strip and diffuser - even the thinner 20mm solid surface tops would be fine with an 8mm deep groove. Being stone based they also have very good heat dissipation properties, so no problems for us there either 😁
Normally you’d put led’s in an aluminium channel with a clip in diffuser rather than leave the leds in a rebate, which does diffuse the light nicely and also protects against the backing tapes adhesive failing and the strip falling out (the channel is mechanically fixed). The neon diffuser looks lovely but it’s thickness will cut output, it’s more for looking at directly rather than a wash diffuser
Oooh, that's super cool! I've never seen these strips that are meant to sort of pleat around corners. that's very cool!
Very nice!
Since the tubing is already coloured I guess you might have used white LED strip as well and get the same result.
The matching colour is more efficient, but white does work.
@@bigclivedotcom You didn't happen to buy some plain white tubing as well? I wonder how well it'd work with an RGB-strip, but with white tubing; that way you could change its colour as needed/to match whatever atmosphere you're aiming for.
Thank you, very cool 👍
Big Clive sign coming up I see 😎 nice job buddy 👍
That would be ideal for a giant digital clock, except my 3D printer isn't large enough to make the channels for the seven segment displays, I've always wanted a "wall" clock the size of the wall in my (for lack of a bette word) Lab, although I could use aluminum channel.
you could devise a 1/4 printing segment, and the connection, you can print almost everything with any size printer, but you need to find work-arounds.
You might be able to get a 2nd hand router pretty cheap and use either wood/engineered wood product or plastic. And wear an N95 or FFP2 dust mask if you do that.
You can split the print into multiple pieces with interlocking ends, and use this type of tape for that.
@@PhilXavierSierraJones exactly this. You'd only have to design three sections - straight, corner, and 'T'. Maybe some extra stuff like colon and AM/PM.
I have a similar thing I did with a tool block (for holding small screwdrivers, tweezers, etc). The pieces dovetail together. New set of tools? just make a new block and slot it in.
Oh, also a soprano Ukelele in three parts. The neck bolts onto the body, but half the headstock is a separate print with a biscuit joiner. For something like that you design it whole, then slice it into parts to fit the printer.
Another opinion is to use straight LED strips for each of the segments. 20 years ago, straight neon tubes would be the choice.
Beautiful.
That would be beautiful as a script...
I want that coolness!
Love the tear down videos! Woul love to get into electronics but I just can’t get my head around the components and what they do, never mind build a circuit board lol
I’m trying to find how I can turn my front indicators into daytime running light/ indicator switchbacks on my classic mini but having no luck🙄
Looks great Clive wish I had a 3D printer
That looks good! Would probably work well in a ikea display shelf routed out if you can get clear diffuser extrusion
The high street store Next have some one off signage and i managed to get a good look. it appeared that the led strip was clear plastic sub straight with 45 degree triangular cut after every led. Looked ideal for this, ive looked online but i suspect they must have got it made for them. Its available now but at the time it was had to find.
@BigCliveDotCom try wiping the printed bits down with iso alcohol; plastic is oil & some juice gets out when you heat print it = better adhesion 😁😁
I saw on a 3D printing group that someone had created a Home Alone prop using that LED strip to pretend to be the red hot charcoal starter that Kevin hangs on the doorknob to heat it up.
It looked really good.
It's always a good day when your butting up is successful
Much better than the 3 m led strips 15 years ago when they were introduced .We had loads of failures Turns out the LED strips needed to be potted or mounted on glass or metal .let me tell you the shelves got warm ! Over driven LED would melt the adhesive on the strip and they would just fall out .
Never knew this existed ! Wow !
So, we will be seeing you name in lights soon :)
That is cool stuff.
Well done
Now I’m dreaming of “Blade Runner”-esque decor. Thanks
Shell/Aral using the same LED´s in plastic tubes (fake neon) to make it cheaper, they use a aluminium strip under the LED strip as heatsink and just push it into 2m long platic tubes with endcaps. Getting thoose around corners is rly hard, better cut it and connect it with short cables cuz the led´s are bright enought to light up the corners 1-2cm gap.
Peace from Germany
Very nice!
That's awesome!!
pretty neat looks pretty close to neon or cold cathod lightining we used in custom built computers back in the day.. like 20 years ago
Awesome 🤩
I'm kinda surprised they didn't just form the strip with little triangles chunked out of the edges by a machine since it would make it even easier to route around corners. If you're using a frame mold you could also dispense with the extruded diffuser strip entirely and just pour in diffusive resin.
true blue clive the kid, "i saw this thing in a video, i think i can do that!", now we are doing that!
would love to see you have a play with the new cob linear strip Clive - they look even more linear than that (though it's a very good product there), and because it can be essentially direct view I'd hazard a guess at being even brighter. oh, and full RGB too!
I've featured the COB strip in a video.
I've been eyeing them for a while now. Any AliExpress store you recommend?
Here's the video where he looked at the cob led tape.
czcams.com/video/GxHQrRiBpo0/video.html
@@bigclivedotcom gah! That's what I get for not keeping up to date. I shall peruse with great interest, cheers as ever!
looks nice. you could paint the inside of the 3d printed housing to refllect more light through the red neon part..
Looks very good.
How about something similar to those spotlight rails, where you have separate LED modules that you fit between two powered rails moulded into the housing, then add the diffuser as you've done here.
I had bought a roll of this stuff at an online auction in my town I paid $10 for a 100' roll of red and I strung it across the ceiling of my son's room and he loves it.
That rubber diffuser looks tasty
Hey Clive. Could you please do a teardown, schematic and discussion about some GaN products, in particular USB power supplies/chargers? I'm interested to know why they're the new thing and how they differ from age old silicon.
I think the idea is that they can operate at much higher frequencies for driving smaller transformers. But that doesn't seem to take into account the extra stress it will put on the output capacitors.
@@bigclivedotcom I haven't looked in to GaN marketed powersupplys, but why would the higher switching frequency stress capacitors? You'd probably use large ceramics directly across the output smoothing out all higher frequency components, and have bulk electrolytics in a similar function as with lower frequencies, if they are even necessary. I don't think electrolytics will do a good enough job at multiple MHz, and the super low ESR of ceramics allows way smaller capacitance values.
I think I might have to get myself some of this
I had a strong feeling of déjà vu watching this.
I've made a few videos featuring the all-in-one LED strip.
Once it gets covered up, it all looks good.
Sharp tool for curves, sharp but still rounded. Hold down, bend up at the point. Put point under next bit, and bend down. Hold down next piece with the point, and bend up, then put point under and bend down to make the next fold.
Basically using the point to make the up and down folds for an accordion style pleat to shorten up the inside. Just a guess, but I've seen rounded points used to do this for similar things..
Just hit me you could probably use an unplugged secondary soldering iron for the point tool, most everyone will have some cheap old straight iron with a rounded or chisel tip that would probably work for a point to fold pleats around. Just make sure you use colored tape or something on the handle so you don't mix up which iron with a hot one..
Awesome Video big clive
That was a great looking light in this video. I used to want to learn how to make real Neon signs and refurbish old advertisements. LED arrays have come a long way in later years!
that does look really nice for what it is for sure. however it wont kill my love for the real thing.. even though it is sadly dying out it seems for the most part sigh.
It's very hard to get the real stuff made here.
Neon, true neon, is going the way of the dinosaur. Thankfully, there are still some makers out there, but most will have to settle for less...
yeah which is why im sad to see it go but at least if they keep improving this at least and maybe some how down to the exposed tube style without needing a frame i guess its all we can do.
I LOVE IT ❤️
Maybe a BigClive logo shape next time would be cool since you can just print a shape. Also saying butt lots I heard gets extra monetization ;)
I havent watched the whole video yet, but already i see my instrument cluster will be illuminated with this provided it comes in an amber 👌 no more hot spots (well, perhaps less than if i just changed the 6 bulbs with led's)