The Camshaft Onyx Has Been Waiting For! (This Is The Camshaft Your Sn95 Needs!)
Vložit
- čas přidán 8. 09. 2024
- Today we throw in onyxs new lunati voodoo camshaft and man is he a ripper and sounds great at the same time! Hope you enjoy!
Be sure to follow my social media:
Instagram:
/ bustedknuckleproduction
Tiktok:
Http://tiktok.com/tjlo...
this is the best sn95 on youtube in my opinion
I appreciate that!
I've always heard from the old school car guys, never baby your engine they are not meant to putt around. Otherwise carbon and sludge builds up faster, run the shit outta that thing like you stole it but at the same time respect it and take care of it is what I was taught. That is what I expect to hear out of a Mustang that is SWEET!
Yep our race engines are beat on the weekends all weekend long and they have zero carbon deposits and zero carbon.
If you’re worried about it on a daily driver and ESPECIALLY a direct injection motor install a catch can! You’ll get rid of any potential carbon build up
@@Texas_Road_Warrior I have a catch can but haven’t put it back on yet lol I been lazy! Which I know on injection engines the build up is worse than on a carb engine because of the pcv systems
Nothing sounds better than a 5.0 with a cam.
Agreed 💪🏼
Love this channel! I am putting my sn95 1995 on the street again. Bought brand new in 96 left over. It now has B303, 1.7 rockers, off road exhaust, Gt 40 turbo swirls, cobra intake, tremendous 3550 with 3:73. Love the car. Also, swapped the computer with a piggy back 1990 computer.
Digging the sound of that Cam
I think you need some more aggressive mufflers to compliment that cam 🤘. But it definitely hits harder for sure. Sounds killer 👍
If you get the threaded rods with the magnets & wingnuts from LMR, you can leave the intake & rockers on. You'd only need to pull out the pushrods.
You may run into valve float issues when that much cam gets into its power peak zone. The correct shims under the spring seats to increase spring pressure and tool steel retainers will help a lot. You can also use the beehive or conical springs to alleviate the issue.
These are plenty enough for this cam, I’ve already had this cam in once before, the springs have way more than enough open and seat pressure, I always check and make sure before doing any cam swap, I appreciate the info though! 👍🏼
I just found your channel. Keep it up buddy!
We need some dyno action! Just to see how much more power it picked up over the e303
I feel like it may have lost a little torque below 3000 rpm but up top feels better.
I miss these wheels in onyx! Someday I will put a cam in my 94. CANADIAN SUPERMAN APPROVES
Oh ya Onyx DEFINITELY sounds like a muscle car now
That E303 cam took a beating with the mods and Nos and still looks great 👍. What name brand is it and how long have you had it? I'm thinking of buying 1 in the future.
I’ve had it for three years now and it’s ford performance brand
@@lollis_garage3683 thanks man 👍. Wow! Ford, huh. I was expecting a comp cam.
@@oscarvillarreal8951 I think crane ground the cams for Ford
Lunati Voodoo!!! Our cars are going to sound twisted together! 😈🎶😈
Yes sir!!!
Onyx Sounds Sexy as it Looks, Super CooL. Everything about your design on that mustang is just tastefully done right. Perfect Name for your channel too💪🏼😎👌🏼
Broo your car sound narely with that cam can’t wait to begin fixing mine in the next week or so/ man I miss my 88 LTD bought it with an open header I made all kinds of noise when I got out of work at 3am 😂
Sounds mean with the new cam.
This cam is definitely rowdier!💪🏼
Love ur content buddy keep it coming
Thank you 🙏🏼
Cam sounds great.
Love the camaro as well.. ive owned 4 3rd gen F Bodys.
Never owned a 3rd gen but I did own a f body!
Nice job bro like that cam 👍🏻
Thank you I appreciate it!
Oh hell yeah, that thing sounds pretty badass and sounds like a beast now, I could listen to that thing all day, sounds like Onyx has a nasty attitude now and ready to kick some butt. Ive been waiting for this video for a long time. You should uncap your headers in the next video just to see what he sounds like 💪🏻😎👍🏽🚗💨💨
I have the lunati 51014 cam in my 95 and it really woke the car up.
Not a bad choice either!
@@lollis_garage3683 no figured it would be good street cam with 112 Lsa so would be good for power adder
I have one video loaded on my channel of the car right after the build
Nice job bro, good on the tips as well and she's sounding and running good
Thanks you! 🤟🏼
Dude sounds sick bro!!! I need to hear in person now!
In person it’s a lot different camera has a hard time picking up the true sound! 🤟🏼
Awesome, ready for the pulls
happy holidays fam , congrats on the camshaft
I appreciate that!
Always fam
Only thing though I gotta get the 3600 stall torque converter since mines is auto matic so next purchase that
Yeah definitely gonna need a stall, what are the cam specs?
Also, surprised me but also like the new channel name.
what length pushrods did you use for this cam? same length you used for the e303 or did you change them?
Just ordered the trick flow stage 2 cam for my mustang
Definitely a good choice
Sounds wicked 🔥
Did you use a cast or steel distributor gear? I've heard several opinions but want real life experience. Fucking awesome to see a carbed SN. I'm building a 351w carbed 93, can't wait.
Can sounds amazing
I appreciate that! 💪🏼
Great sound......👍👍
Are you going to show how to read spark plugs on NOS any time soon bra?
Yes I plan too here soon!💪🏼
can you show how to bottle warm a NOS tank, how, when to do it? What to use to do it, how do you know when it's almost out. When you don't have it in your car and you're going to put the bottle aside to pass the inspection should it be in a shaded area locked up so it won't go capluee 💥? What kind of spark plugs to use on your set up with NOS. And for maintenance when should you change the spark plugs with Nos?
Did you have to fly cut pistons .
I have a tfs stage 1 with 1.7 on my 94 cobra.
I was told for a stock bottom end you could not go much larger.( lift)
I do like your build .
I will continue watching your progress.👍
No the bottom end is untouched but if you have stock heads the cam I used is to big of a cam and won’t work! The valve retainer will hit the valve reliefs and chase major issues lol
Thanks for response.
Im glad i found your channel.
you should put some dump exhaust on it bro
Opinion, flow40 vs those m80 mufflers you got. Which is louder, and what do you prefer?
M80s are definitely louder but the flowmaster sound is hard to beat!
@@lollis_garage3683 that's my problem maaaaaaan cant choose 🤣
nice should sound great getting on it :)
Oh it does 😏
What the link for the cam?😅
I have a 95 cobra with ported heads with a e303 cam and tune by Ted Jenkins, if I was to switch cams with the voodoo cam would I be ok with my heads, valve springs and current tune? Base idle is set at 950
Stock heads won’t hold that much lift unfortunately the valve reliefs would have to be cut
What do you think about Anderson 91 camshaft
I. Trynna throw my stage 3 in my c5 u wanna help with mine u make it look Easy af lol
Lol it’s definitely more difficult on a c5 but I can do them 😂
Would you recommend this cam with a stock style head? Example gt40 or 40p with or without spring upgrades was looking at a b cam but this has my attention now lol
Too much lift for the stock valve reliefs. You can cut them bigger with a cutter valve, but it's meticulous detail work that has to be done correctly.
Most definitely not way to much lift for stock style heads as mentioned i above you’d have to cut the valve reliefs and by the time you do all that, you may as well buy an aluminum head that can handle it.
Did you degree the cam or install it dot to dot? Thanks in advance.
Just dot to dot. 👍🏼
Did you have to run a stall converter for that much cam
My car is a 5 speed car. So no need for the torque converter swap.
Are you running the 170 or 190 heads?
190
What’s the part number on the new cam?
Part #20350712
Did you have to tune it or can you throw it in without a tune?
My car is carburetor swapped so I do all the tuning my self.
Is your bottom end stock
Yes
I wonder if i can run 2 e303 cams in my 2v 🤣😂🤣😂
Wouldn’t that be nice 😂
@@lollis_garage3683 i would have already got 2 B Cams if that was the case 😂🤣😂
@@TheModAddict yes sir the b cams sound great and perform pretty well too
When does onyx evolve into steelix?
Whenever I hit the lottery! 😂
Will this cam work for a 89 gt
Unfortunately no it has to much lift and will interfere with the stock valve reliefs
Them heads r 600 lift right
Yes these heads from the trickflow will support .600 lift max
U got 1.6 rockers
@@torapruitt9491 yes 1.6
Must be nice to have the kind of wallet you have,,,always full
😂 whenever I find this wallet full of money I’ll be sure to let you know!!!
Its called hard work. @Ia snow you should try it.
Bad choice to include the IROC as it sounded better than Onyx
If I was running straight long tubes onyx’s cam would sound probably exactly the same. That’s what he’s running right now.😂
Opps becareful Chevy guys don't like the truth