"I don't want to blame Josh, but he loaded the dishwasher last" :D. I have a draining error in my Samsung dishwasher too (blinking delicate light). Will try vacuuming this part. Thanks for the suggestion and uploading the video.
What I did was bypass that whole apparatus y putting my drain line directly on the pump. I have no hoses on the input or output of that white part. I left the sensors hooked up and it is now only used to fill up the dishwasher. Washer works just fine so why was the water pumped into that big white piece anyway?
In other videos on Samsung dishwashers, they talk about pieces of plastic that break off from the top shelf adjusters. They go trough the system and can block the water level sensor. That was what I discovered in my machine. When I blew and cleared the plastic it went and blocked the drain hose, causing another alarm. I finally found the piece of plastic and removed it. Machine now working ok.
Seems like a common issue...disassembled all parts of the drainage system, cleaned it and found screws, plastic, eggshells and the 1 round rubber piece sittin in a hose what caused the OC/LC code. You could blow thru the hose but only with water it blocked the hose...took it out and it was working for about half a year till i got those code's again. It's getting frustrating!
Hey, this helped a lot. Also had a question maybe you could help. The not the black or grey tune but the third tube, what is that called? It’s missing on mine and I been trying to look everywhere for it.
I got the error after blowing them out and trying to clean it. I'll try the vacuum method. Have you had this happen again since then and did you have any other issues / fixes?
I need help!!! I have the same exact problem. It was all gunked up at the sensor on the right bottom so I cleaned that up and it's still not working!! I see stuff gunked up on the left top. It's like a little kink off the main drain route. I just can't get it cleaned. It's that the problem??
Before your narcisist , " it couldn't be my fault" persona blames poor Josh, who is already suffering from your controlling ,bullying ,that crap could have been in the machine for weeks before finally getting caught in that valve / passage system ,,,,so guess what Narcy , It may have been your fault, my boss is just like that , ,he will run the shit out of clear coat ,and blame it on me because I didn't tell him he reduced the paint too much, I hate a fuckin' bully
"I don't want to blame Josh, but he loaded the dishwasher last" :D.
I have a draining error in my Samsung dishwasher too (blinking delicate light). Will try vacuuming this part. Thanks for the suggestion and uploading the video.
What I did was bypass that whole apparatus y putting my drain line directly on the pump. I have no hoses on the input or output of that white part. I left the sensors hooked up and it is now only used to fill up the dishwasher. Washer works just fine so why was the water pumped into that big white piece anyway?
Did you take this piece off the dishwasher?
grazie infinite! Sono riuscita a risolvere il problema che avevo con la mia lavastoviglie grazie a questi video!!!
In other videos on Samsung dishwashers, they talk about pieces of plastic that break off from the top shelf adjusters. They go trough the system and can block the water level sensor. That was what I discovered in my machine. When I blew and cleared the plastic it went and blocked the drain hose, causing another alarm. I finally found the piece of plastic and removed it. Machine now working ok.
Cool
Seems like a common issue...disassembled all parts of the drainage system, cleaned it and found screws, plastic, eggshells and the 1 round rubber piece sittin in a hose what caused the OC/LC code.
You could blow thru the hose but only with water it blocked the hose...took it out and it was working for about half a year till i got those code's again. It's getting frustrating!
Thanks!!! You help me repear my dishwasher.
Hi, the two larger hoses. Which one goes on which port on the left? Is the outlet on the left or right of the two?
Hey, this helped a lot. Also had a question maybe you could help. The not the black or grey tune but the third tube, what is that called? It’s missing on mine and I been trying to look everywhere for it.
Totally blame Josh.
I got the error after blowing them out and trying to clean it. I'll try the vacuum method. Have you had this happen again since then and did you have any other issues / fixes?
Cool
Josh here i did not😅
Sounds like a total Josh move to me.
Go Josh James
Might be small plastic tabs of the rack. Very poor design.
Hay
I need help!!! I have the same exact problem. It was all gunked up at the sensor on the right bottom so I cleaned that up and it's still not working!!
I see stuff gunked up on the left top. It's like a little kink off the main drain route. I just can't get it cleaned. It's that the problem??
The part in the video is called a "Case Break" DD82-01373A.
Mine is not opening how can I open it?? The plastic on the side
I think you just pop it off
@@oldaccount2833 yea no I think it’s jammed
@@marissademedeiros4416 I actually saw on a different video on the inside you turn it counterclockwise to unlock it
Before your narcisist , " it couldn't be my fault" persona blames poor Josh, who is already suffering from your controlling ,bullying ,that crap could have been in the machine for weeks before finally getting caught in that valve / passage system ,,,,so guess what Narcy , It may have been your fault, my boss is just like that , ,he will run the shit out of clear coat ,and blame it on me because I didn't tell him he reduced the paint too much, I hate a fuckin' bully
So, you became one.
Buddy, it is a year later to your comment, but you have a serious problem in your head... Screw the dishwasher, fix your head... 😜
Most definitely became one! Wow