SIDEMOUNT - XDEEP Stealth 2.0 Harness Setup

In dieser vierten Folge der Sidemount-Tutorial-Serie, möchte ich Euch das Setup des XDEEP Stealth 2.0 Harness näher bringen. Ich zeige Euch im Detail wie Ihr Eure Grundkonfiguration vornehmen könnt.
ABONNIEREN nicht vergessen: abonnieren.scubanaut.eu/ !
★Link zum XDEEP Manual für das XDEEP Stealth 2.0 Harness:
www.xdeep-tauchen.de/sidemoun...
★SIDEMOUNT - XDEEP Stealth 2.0 TEC Wing Setup
• SIDEMOUNT - XDEEP Stea...
Schaut Euch auch meine anderen Folgen der Sidemount-Tutorial-Serie an.
★SIDEMOUNT - Single Tank Setup - Sidemount mit einer Flasche
• SIDEMOUNT - Single Tan...
★SIDEMOUNT - Atemregler Setup | Regulator Configuration - Apeks XTX50
• SIDEMOUNT - Atemregler...
★SIDEMOUNT - Flaschen Konfiguration (Rigging)
• SIDEMOUNT - Flaschen K...
#Sidemount #xdeep #stealth20

[@scubanaut3884]

Schaut Euch auch meine anderen Folgen der Sidemount-Tutorial-Serie an:
★SIDEMOUNT - Single Tank Setup - Sidemount mit einer Flasche
: czcams.com/video/4G7wYzGYbAk/video.html
★SIDEMOUNT - Atemregler Setup | Regulator Configuration - Apeks XTX50: czcams.com/video/fDs3XZVBvKc/video.html
★SIDEMOUNT - Flaschen Konfiguration (Rigging): czcams.com/video/NjH0cTtbxNc/video.html

[@sarafinafriedrich8322]

Wieder ein tolles Video zum Thema Sidemount

[@wkolcz]

Even though I can't speak a lick of German, this video (along with the other ones) are invaluable to watch since I will be getting my Stealth 2.0 in a couple days. Danke!

[@TheAMGReviewers]

thankyou for the review, i cant speak what i assume is german?(apologies if not). the video helped me to understand how this works so i can make my own

[@scubanaut3884]

It is german correct :) I am happy that my Video helped you!

[@andreasgilbrecht8425]

Klasse 👍🏻. Vielen Dank

[@scubanaut3884]

Gerne doch

[@razor_sidemountdiver]

Moin. Ist das immer noch Up-to-Date? Ich finde es sehr beengend, mit dem Trocki immer oben oberhalb des Bungees (für die Flaschen) mit den Ringen vom Handschuhsystem einzufädeln. Wie hast du das gelöst? Wäre cool wenn man die Schlaufe (die, womit du das Bungee mit dem Bleistopper unterhalb vom D-Ring führst) nach unten schieben könnte um den Einstieg dann kurzzeitig zu vergrößern. Hast du da mittlerweile was aktuelles - zumal dieses Video ja schon 4 Jahre alt ist. Danke und Gruß

[@wookster789]

Any chance this is available in English, please? I'm trying to follow along...it is an excellent video!

[@scubanaut3884]

Thanks for you nice comment . It is not on my schedule at the moment to upload these videos in English. That does not means that I will not :) but there is no time right now .

[@wookster789]

Thanks for the reply :) Either way, keep up the good work!!

[@scubanaut3884]

wookster789 I will do my best 😃

[@kostinioagelinio8577]

Moin Moin,
Nice video!
Can you please tell us :-
1. why do you make 2 bungee loops and not use 1 long loop??
2. instead of x2 triglides - have you tried the Xdeep rubber o-ring for looping the tank valves??
Gruss
Kostas

[@scubanaut3884]

1. The problem what i see on a big loop is that if one tank is dettached from the big loop the other side will become looser. As well on a Malfunction of the big loop it is affecting both tanks.
2. for my taste the big rubber orings from xdeep are a little to thick. i sometimes struggeld on hanging the boltsnap in the rubber oring. But i switched over to Triglides from UKSump

[@kostinioagelinio8577]

@@scubanaut3884 MOIN!!!
Good tip i didnt think of this, danke!
And yes thinking also to get the sump triglides.
Bleib gesund!!

[@The_Endless_Summer]

Why is the title in English but then the audio is in German?

[@TheMrwoodoo]

Plz do this vid in eng

[@scubanaut3884]

Tommy Strid sorry man, That is currently to time consuming

[@TheMrwoodoo]

@@scubanaut3884 sry 2 hear cos there is 0 vid on seting up a xdeep stelth 4 the eng speeking ppl .( speclially the bungee part