Testing Glitter Cardstock on Silhouette Cameo 5 & Curio 2 Electrostatic Bed: Will It Work?
Vložit
- čas přidán 12. 09. 2024
- I tested cutting glitter cardstock with the Silhouette Cameo 5 and Curio 2 on the new Electrostatic bed and I'm sharing my tips and results in this new video.
Don't forget to like, share, and subscribe for more crafting adventures and product tests.
More tips for using the Silhouette Electrostatic bed - silhouette-sec...
Silhouette Classes on Teachable - silhouette-sec...
Affiliate links may be present below and as an Amazon Associate I earn from qualifying purchases.
- Silhouette Cameo 5 - bit.ly/3PyENMg
- Silhouette Autoblade - bit.ly/47c4lWP
- Silhouette Electrostatic Bed - bit.ly/46rF5vP
- Silhouette Protective Sheets - bit.ly/3SxWnmI
- Silhouette Curio 2 available at CrafterCuts - bit.ly/3ZeiDDH or Silhouette America - bit.ly/3sf161Z
- Close to My Heart Glitter Cardstock
- Lint roller - amzn.to/48lMRY4
More videos on the @SilhouetteSecrets CZcams channel here: / @silhouettesecrets
Want to help support this channel and future tutorials?
Buy us a coffee - ko-fi.com/silh...
Find me online at:
Silhouette Secrets+ Blog - silhouette-sec...
Silhouette Secrets+ FB Page - / silhouettesecretsplus
Silhouette Secrets+ FB Group - / silhouettesecretsplus
Silhouette Secrets+ Instagram - / silhouettesecretsplus
Swift Creek Customs FB Page - / swiftcreekcustoms
#silhouettecameo5 #silhouettecurio2 #silhouette #glittercardstock #papercrafting #electrostaticbed
Affiliate links may be present and as an Amazon Associate I earn from qualifying purchases. What that means is that I may receive compensation if you purchase through the links I have provided. The price you pay for the product or service is not higher but I may get compensated for sharing.
Oh my, looks like I need to get some glitter paper.
Thank you so much. Can I cut 350gsm cardstock with this machine? Thank you.
I have cut 110 lb cardstock with the Curio 2. You'd have to test it with your cardstock.
Thank you for this video. Excellent tips! I do have a question about the electrostatic protective sheet. I noticed on both machines the sheet had a trace indentation of the pattern. Though it cut well, this would bother me to no end to constantly have each cut imaged on the sheet. It's like a mat you can never clean. My question is, Are these special sheets or just 12 by 12 plastic sheets I could easily replace when I want?
They are special sheets. I do not recommend alternatives. It's easily replaced, but it's perfectly normal for you to see the cut anytime you cut completely through a material, just like on a cutting mat.
The replacement protective sheets Cone 2 per pack and are not expensive.
And they last for a lot of cutting, unless the user cuts completely through it and that is 100% user error.
Here are the protective sheets - - Silhouette Protective Sheets - bit.ly/3SxWnmI affil
I don't recommend any hacks because if you damage the ES bed, that is more expensive than the protective sheets and it would be 100% on the user. Not a machine fault.
So far I have found that taping is necessary. I just ordered a replacement protective sheet. The brand name cutting mats sticks pretty well. I am a new user and have had damage to a cutting mat and protective mat. Worried about damaging the electrostatic bed.
PS: It seems that a debris tray may be a must.
Is es mat for cameo 5 hold the paper better than curio 2 esbed? Or both are the same?
Both the same - however, the biggest difference would be that the Curio 2, the ES bed is a stationary bed and does not move - the blade housing arm moves. On the Cameo 5 and Portrait 4, the ES bed moves back and forth, which could make a difference depending on what you are cutting, settings, material, etc.
@SilhouetteSecrets And between curio 2 vs cameo 5 which one is better at reading registration mark? I saw some people facing problem with failure reading the mark.
.
Since cameo 5 closed body machine and curio 2 open machine (no case around body), I wonder if it affect the sensor or light to reading the the mark (?)
Your reply will very helpful for me. Thank you.
@iremu6100 I have no issues with either machine reading the marks. A high majority of print and cut issues are due to the setup.
But, I have experienced that if you shine a bright light at the Curio 2, it can interfere with print and cut.
That can also happen with a Cameo as well. However, you'll see many mention it as a "solution."
Variable light sources can interfere with any print and cut on any machine model. Consistent, adequate lighting is what is best and full mat support.