2011 Kawasaki Concours 14: Spark Plug Replacement

What a pain. But it’s done.
Make sure the Stick Coils are fully seated - push, straight down, with firm pressure.
Prerequisites:
1) Place bike on center stand
2) Remove the Top, Middle and Bottom Fairings (Left & Right)
Tools I used:
Torque Wrench (⅜” Drive)
Ratchet (⅜” Drive)
6” Extension (⅜” Drive)
3” Extension (⅜” Drive)
U-Joint Socket Adapter (⅜” Drive)
⅝” (or 16mm) Spark Plug Socket (⅜” Drive)
10mm Socket (⅜” Drive)
Ratchet (¼” Drive)
6” Extension (¼” Drive)
8mm Socket (¼” Drive)
High-Temp Grease
Anti-Seize
Acid Brush
Rags
Parts:
4ea NGK CR9EIA-9 Laser Iridium Premium Spark Plugs
Torque Specs:
Spark Plugs: 13 Nm (115 in lbs, or about 10 ft lbs)
**Disclaimer .aka Boring Legal Stuff** The information provided in this video is for general informational purposes only. All information is provided in good faith, however I make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of this information. It is your responsibility to review and adhere to the official documentation provided by the manufacturer prior to performing any maintenance. I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user.

[@jgonzalez5569]

All of your videos are awesome! The best to be found on the Concours 14 maintenance. Thanks!

[@parkerraus3402]

Rain right in the middle of a big project, that sucks! Great job, love all your videos! This is next for me along with the valves, ugh.

[@grindsoul]

You have saved me quite a few dollars sir. I thank you -

[@odyshopody9387]

When will your valve adjustment video drop???

[@psylentsage]

YES! I have been waiting for this video for so long 😊

[@cruisecontrol808]

Any suggestions for others?

[@douglasgrosch228]

Thank you ..for videos .need to do O ring that leakes by header pipes .can you get to it just taking ferrings off and radiator slid down ..or off?? Just wondering .

[@cruisecontrol808]

I removed the fairings and slid the radiator down for mine

[@douglasgrosch228]

thanks @@cruisecontrol808