How to Make USB Rechargeable 9V Li-Ion Battery
Vložit
- čas přidán 28. 04. 2019
- （Materials required）配件表
9V Battery 电池
Adjustable Step Up Charging Integrated Module 可调升压充电一体模块 bit.ly/2GR3PEs
102535Lithium Ion Battery 软包锂电池bit.ly/2ZIT7qT
SS12d00G4 Toggle Switch 拨杆开关 bit.ly/2DDr7f0
optical fiber 光纤
PCB Prototype for $2(Any color): jlcpcb.com/
music1
Song: Ikson - Sunny (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: • Ikson - Sunny (Vlog No...
music2
Song: Jarico - Hawaii (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: • Video - Jak na to + styl
I didn’t think this would be a good video, but the optical fibre trick definitely was a stroke of genius.
Great video.
Excellent one to do. Show this idea to Duracell is a must. Way to go!
I seen this times ,still i don't get bored!...
Great execution ...I loved the optical fibre part !!!
Good luck
Bahut Achcha Banaya
@@opkashav6740 ggkhllb sixes
Jjvjjk
Net wat ik nodig had!
thanks for the idea, i did this without the fiber optic and the switch! i would like to note that its very important for the 9V battery to have a plastic casing. mine had an aluminium casing and it was very difficult to work with.
so yea for the people who are looking to do the same mod just get a battery with plastic casing..
Full knowledge of battery
czcams.com/video/nrUgQ-lOhLM/video.html
Are you from india
١🎯🏌️♂️🏌️♂️🏓⛳
Without the switch does it mean that the battery is always on? Is self-drain noticeable?
@@ytfanlingeric yup it is actually. I would suggest you add that switch IF you are going to use the battery occasionally. If its going to be used constantly then prob switch wouldnt matter that much
Dmn! Very clever idea! Also with the optical fiber for the LED... Thumbs up!!!
Thank you
👌🌹افرین چه طرح خوبی من از این ماژول ها دارم اما بفکرم نرسیده بود این کار رو انجام بدم و باطری ۹ ولت شارژی داشته باشم ممنون بابت کلیپ اموزنه و خوبتون .خیلی ها فقط ویدیو های کلک در یوتوب میزارن اما شما یه روش عالی رو به اشتراک گذاشتی .
such batteries should be created in series is a really good idea
i also did this same project but i set mine to 9.6v to maintain the voltage hold the multimeter when the lipo goes low voltage. by the way love your technique with the optical fiber, now i would try that.
9.5V is brand new 9V battery
Optical fiber trick was pretty ingenious 👍👍👍
Nice Project Mate!!
Good to see actually useful diy videos
I like the fibre optic, great work
@@ariprasathj838
Ty l do na
@@ariprasathj838 I think she had a stroke
Nice brother ..good concept ...keep doing ...nice work
Thank you
This is dope. I think id just but a rechargeable battery at this point though for the amount of work it takes lol
必须给你点赞，用光纤把指示灯引出来，太聪明了。
谢谢
I always knew this guy was a genius, I wish you have a great future 😊
Thank you
@@KJDOT you're most welcome ☺️
Спасибо большое за информацию 💥🌟💥🌟 Thanks for video 💥🌟💥🌟
创意无限，赞！！
谢谢支持
@@KJDOT d
@@KJDOT ممةىىىىةنل
Very good project i make a 9v power bank for internet router with this trick.... Thank you
be careful the circuit used has the defect that I described in my answer: it has no protection against over discharge. So the battery will be damaged quickly also thanks to the step-up circuit that will not show the battery drop outside.
A real shame and a serious distraction from those who made the article
It's very useful to do !
Congratulations, fantastic,, wonderful.. too good to be true. Hello from Venezuela.
خهعتبىءبسؤييروةوىبانلبررؤؤيسؤؤءسىاب..نلنبتالبوىبييملييسكىىؤمىررءءءبسرىىوةوظاببتلاانلنبيسشششتيءنيةينببستس
Wow awesome your bulid quality always professional...👍
Everything you do is really nice
Thank you
That's a pretty neat idea, I wasn't aware of this module until now. Thanks for sharing!
Thank you
same bro
Ghar mein nahin karta ka status kyu Banaya deta hoon
Aziz
Dunyada hame texnykamenen shuģilansa eshoaxita tòmen bolmaydi
This is the best 😃😎
Nicely done!
Nicely done
Good Job. Thanks for sharing ;-)
Thank you
That is unbelievable! Love it! I never saw that
Thank you
Impressionante! like garantido!
Underrated vid.
cool build !!!! 😮😮😮😮
Thank you
Fantastic work, bro! Really nice! 😃
Thank you
Fantastic video, I also made one
Great
That's a good project instead of disposing used up batteries, you make them reusable by modding it
You have to dispose the toxic alkaline contects inside anyway plus i think he bought the case
that's awesome. great video
Thanks for showing me how to do it so I can save money for my smoke alarm
USDD don’t do that. It will die super fast and you will two when your house burns down.
@@carsonmcnamer5321 и не только в 1 и в магазин с дочей
Good, thank you. You can use only two li-ion battery. You must be use white tape for fiber optic.
Very nice project 👍
Thank you
You rock!
Nice job
اس
و
Kid: Asks Mum if he can do this
Mum: NO
Ikkk
Bb b
B
Juiuuuuuu
I like it
Verry good bro
Seus vídeos são ótimos👏👏👏👏👏
حلب صار اررزىؤروءر؟:" &)):*))،##-؛-)-&^@*@&:&^$(()&/#@@@&$##*$"*^/$##$#####*^$$$'^"$$###@@&^//$$''--*/@☆[}~《\₩¥》)^^؛"$':، (0865148؛"###")*/$#$&/#@#&^$#@@&$#@
wow Awesome idea!i will try
Wow i just noticed u were a yt
And a really good amount of subs
A battery Dam Koto
23
battery Dam Koto
Woww...amazing..
I'm affraid the battery 102535 ( 10x25x35 mm.) that you state in the list of needed materials does NOT FIT togheter with the step up boost and the switch into the standard 9 volt battery case. This jeopardises all your fantastic work !
Very Good 👍👍👍
Wow nice brother .. it's good having a rechargeable one ..nice ..keep doing
Thank you
what kind of camera do you use for your vlog?
Nice video awesome trick bro
nicely made!
such a great idea! I will make one
Thank you
Using a step-up converter has some disadvantages (with low currents, self discharging, capacity at all). Most of the 9V Li-Ion blocks, which you can buy, are using 2s, also not ideal (voltage was to low), but slightly better for low current and log term usage (which is the typical usage for remote control or measurement equipment).
Thank you
Я такую батарейку для мультиметру сделал сам по схеме из журнала Радио за 2017 год номер 1.
Nicely done! Very high quality!
Thank you
I danced through the entire video...
Darcy Whyte 😭
This is amazing idea!
Thank you
Really the clean and finest work on a 9V battery! Cheers from Spain
Marvelous idea
Like 👍
Great idea, but I think the "Battery" wont last very long if the device isn´t in use for a longer time, because the intecrated circuitboard will use little energy even when not in use, and taking it out everytime to switch it off isn´t very usefull. A better way will be using the good old Ni-MH rechargeable batteries.
you are right
Battery my 9v a
Great idea! Super usefull
Thank you
With that idea you wont need another. This is will be good for testing a prototype if its 9V batt
Pls note that 9v step up converter doesn't support over discharge protection. You'll destroy you're lipo if you're not checking voltage regularly.
2:25 his lipo seems to have a built in battery protection board....
@@Makoto778 almost every lithium batteries has it, but it still damages battery to overdischarge them.
I have been making similar battery recently with protection board and voltage meter with 3d printed case. And I know that battery won't last long since step up consumes energy even without load. That's probably why he installed switch to it. But for most 9v battery applications it's pretty useless since it drains itself empty in few months.
There is no way I could cut the holes and fit the guts in the case without doing a mess, burning my fingers and cutting myself.
Congrats.
That's why you do it again and again, until you master it
CptVolkow I am afraid I was gifted with 2 left hands...
ρε μαλακα δωσε μου εναν λογο να το κανεις αυτο.. Παρε εναν γαμημενο φορτιστη
I guess someone doesn't know Rechargeable 9V Battery exist! 😵😵😵😵😵😵😵😵😵😵😵😵
@@srfrg9707 ορθογραφια
Super idea!!!
Your idea is exilent
This is a great idea, thanks for sharing! Question: if the switch is on but no load (i.e. multimeter or whatever is off), will the battery still discharge?
Yes, it will discharge, somewhen
@@dominikworkshop6007 thank you!
Waw, just amazing.🙏
Thank you
good work continue
Another really useful project! Keep up the good work!
Thank you
自製萬應充電電池!
簡單又實用!
小巧好攜帶!
市面上的充電電池百萬種
有的是比較昂貴難以下手==
想充電時拿出你的手機線
就可以充電囉！
自製萬應充電電池
簡單又實用!
谢谢支持 (°∀°)ﾉ
裡面真的長那樣嗎
@@user-zm1rz8zy4e ningappa
This kind module will drain battery dry in a week! Personally i'm using two lipo cellphone batteries in series, so my multimeter can run for a year on a single charge.
use a battery that holds more charge in then
me too,2 lipo cells fully charged are 8.7v, close to 9v since my multimeter work from 9.5 to 7v
@@dcd11mc60 That's not his point. Boost converter modules will draw power when powered on, even under a no load situation.
@@HobkinBoi +++
DC-DC modules draw significant power even when there is no load.
If you actually checked the module specs, you would know that it states _Quiescent current: about 0.5 mA_ .
With a 500mA battery, that's 1000 hours or about 40 days.
Nice job :-)
I hope they put it on the market
Great video, where did you get the screw driver? LOL I cant find a 9v plastic case anywhere. My wife is ready to kill me stripping all the 9v batteries from the casings LOL
HAHAHAHAHA
this will eliminate my annoying smoke detectors.
no it will be worse, a smoke detector battery is a single use lithium (it should be) this is running its dc-dc converter all the time, the single use lithium will work for 10 years, this will run about a week (it uses 15ma standby)
Good point. I wonder if there's a way to trick my smoke detectors into thinking there's a full charged battery, even if it's a safety risk
@@jusb1066 - IT DOES NOT USE 15mA Standby FFS read the specs properly.
However I agree it's a dmb idea to use this in a Smoke Alarm.
very good idea
Very nice sir great work
Thank you
Can u find an alternative for the fibre optic can u replace it with an led
Fiber optic is the easiest way to do it and it's reliable.
You linked to a high discharge lipoly battery. I would reccomend a liion, because liion's are more energy dense tha lipoly.
Very nice 👍
Wow bro it's amazing
Good morning
1:53 I realised my life is a lie
abdul bari They’re not custom made, they’re standard size batteries and you can buy them. However, they are not AAAA batteries, but a slightly smaller size, LR61.This is much more clear in the IEC name: 6LR61, which is 6 LR61 batteries.
Efic
She would have liked that too and then and then I would be good to hear her a note that the virus was here
G lol p0pp lol pop
Please Ghar ki battery charge
using fiber for the light was smart as fuck ngl.
agreed. another solution is using the clear hot glue and just dabbing a line of it
Now that is REALLY clever mate!
Wow awesome idea I will try
Nice work bro!! but the boost circuit on the module will damage your battery without a low voltage protection board. The module drains battery to 0.9v
Actually the battery has a protection circuit board that cut at 2.8v and prevents from short circuit
true
So it’s perfect
It is interesting idea for me. I make a rechargeable LED light with it: thank you!
Wow amazing idea
Finishing is good
Bro make a video on what to do with old battery
Anybody with a roll of tin foil can watch and learn--or not.
O m G 😯😮 great idea
Great work you do some really creative projects
Thank you
Good job. It's hard/difficult to do so. Buying one from the store near my home may be justified.
Супер идея👍 Что за плата ?
Плата для безопасной зарядке батареи
Very good idea
Great idea