Use this awesome tip to cut wire rope without fraying it! #homemade #steelwire #steelcable #youtubeshorts #shorts #shortsvideo #constructionhacks #constructiontips
The edit is quick, but it's obvious you splayed the wires out after the cut, because the actual cut was quite clean. And simply wrapping it with tape is a much better method anyway.
Как здорово, дружище! Это действительно лучший способ перерезать стальные тросы. Видеоподсказка предназначена для тех, у кого нет инструмента или для экстренных ситуаций. Спасибо за просмотр.
Нет друга! Желаю МИРА всем! Мнения расходятся. Некоторые люди более вежливы, когда высказывают свое мнение. Я ценю, что вы смотрите! Привет из Бразилии!
It's sometimes called wire rope here. Not sure at what thickness that they call it cable, but it also depends on the industry. Wire rope probably comes from the aerospace and flying industry, hence where the term "fly by wire" comes from.
@@brestore sometimes you have to make the best of the situation. Some flux on it, little soldering tin melting on it and cut it after makes it stay together..
Si je fais ça, et que je doive couper une cablette ça peut arriver 200 fois par jour selon votre tâche et qu'en plus je sois dans une nacelle ( souvent ces petits filins servent en hauteur ) alors il me faudrait installer un etau dans le panier de la nacelle prendre un petit chalumeau, et faire comme vous le faites à chaque objet à accrocher, je crois qu'à la fin de la journée mes collègues et mon responsable me disent : c'est tout ce que t'a foutu. Alors, très amicalement laissez tomber votre méthode pour le moins étonnante , munissez vous d'une pince coupante qui coupe pas émoussée , une vraie pas un truc ou il faut se péter la main pour couper quelque chose, déjà vous devez pouvoir couper votre filin très nettement si vous n'êtes pas sûr de vous, entourez juste votre câble d'une bande de ruban adhésif ( type isolant ) et allez y coupez votre coupe sera impeccable, mais c'est inutile une bonne pince suffit, si on veut aller dans les détails il existe des pinces coupantes à mâchoires droites ou biseautées c'est vous qui voyez.
Tu as raison. CEPENDANT, considérez ce type de contenu comme des conseils alternatifs sur les bonnes façons de faire le travail. Il arrive parfois que vous ne disposiez pas de l’outil idéal. Merci d'avoir regardé!
@@brestore je ne le nie pas, mais maintenant vous saurez qu'un rouleau de ruban adhésif peut faire l'affaire, au delà chacun sa méthode, ce. n'était qu'un simple conseil.
Get a roll of sewing machine thread and wrap it around the wire. Add a drop of superglue and wait 5 mins. After drying, cut it using a chisel. It will be like new.
Grazie per il suggerimento, Filippo! Guarda il mio nuovo video con 6 suggerimenti per rimuovere le viti con la testa danneggiata: czcams.com/video/4z9DcVDpz0Q/video.html
Чувак, я не понял твой первый комментарий. По этой причине я просто поблагодарил вас за просмотр. Если вы что-то спросили, пожалуйста, перефразируйте вопрос другими словами. Спасибо!
Что бы вы хотели знать о Бразилии? Страна очень большая. На юге холодно. На севере жарко. Мы в Южной Америке. Практически все страны говорят по-испански, а мы говорим по-португальски. Солнце появляется каждый месяц в году. У нас сейчас зима. Сейчас 17º C. Ночью должно быть 9º C. Люди счастливы и трудолюбивы. Преступность есть, но не такая, как показывают по телевизору. Страна была бы намного лучше, если бы не коррумпированные политики. Самые популярные виды спорта - футбол и волейбол. Что ж, извините за ошибки, я использую Google Translate.
Unfortunately you destroyed the temper of the steel. Could wrap with tape on both sides of the cut, that's what I always do.
🤣🤣🤣
Thanks for watching, Shane!
🤣🤣🤣
Or you can use a car battery
How is this tip, Maicol?
just use the right cutter for the job
Hello Martin! I appreciate the tip!
This trick is for those who don't have the proper cutter.
Thanks for watching!
The edit is quick, but it's obvious you splayed the wires out after the cut, because the actual cut was quite clean.
And simply wrapping it with tape is a much better method anyway.
Ok.
Thanks for watching!
I was just about to try that .thanks for the proof I needed
Hello! I appreciate you watching my video!
Please see my latest video: czcams.com/video/4z9DcVDpz0Q/video.html
у меня бокорезы и так режут такой тросик без ворса ))
Как здорово, дружище! Это действительно лучший способ перерезать стальные тросы. Видеоподсказка предназначена для тех, у кого нет инструмента или для экстренных ситуаций.
Спасибо за просмотр.
Нет инструмента, но есть тиски, горелка и бокорезы в экстренной ситуации. Мотаешь изолентой и посредине кусаешь бокорезами. Проще некуда
Спасибо за совет!
Спасибо за просмотр!
@@brestoreты зачем всем спасибо говоришь?Да пошли они все нахер
Нет друга! Желаю МИРА всем!
Мнения расходятся. Некоторые люди более вежливы, когда высказывают свое мнение.
Я ценю, что вы смотрите!
Привет из Бразилии!
He annealed the steel so I doubt it "ruined the temper". It's steel wire, why would it ever need to be tempered? It doesn't have to hold an edge lmao
Ok, Alex. Tks for watching.
Проволочкой обматывают место разреза, с двух сторон и режут хоть чем.
Ok.
Спасибо за просмотр, Алекс.
А стропорез из двух шайб и болтов, ты больше не применяешь? 😂
Спасибо за совет.
Спасибо за просмотр!
Это не провод, а трос.
Да. Возникла проблема с переводом.
Спасибо за просмотр!
Да
Спасибо за просмотр!
It's sometimes called wire rope here. Not sure at what thickness that they call it cable, but it also depends on the industry. Wire rope probably comes from the aerospace and flying industry, hence where the term "fly by wire" comes from.
열과 전기는 와이어로프 강도 저하의 원인
Couple wraps of electrical tape and snip the middle of the tape.
I made it with masking tape: czcams.com/users/shortsjdDEYfMUmuk?feature=share
Покажи режущие кромки своего инструмента после того как они трос "грызли"!
Кабель тонкий. Повреждений не было.
Спасибо за просмотр.
A simple crimp would sort that or just a bit of tape.
Hi Eden! This is just one more tip. The tape tip I posted today...
Thanks for watching!
Get better cutters at first, there are special ones for these cables.
Thanks, friend! The tip is only for situations where you don't have access to these connectors!
Thanks for watching!
@@brestore sometimes you have to make the best of the situation.
Some flux on it, little soldering tin melting on it and cut it after makes it stay together..
Thanks!
Greetings from Brazil!
Болгарка
Говорит по русски, режет по китайски
Извини, друг! Я не понял...
Si je fais ça, et que je doive couper une cablette ça peut arriver 200 fois par jour selon votre tâche et qu'en plus je sois dans une nacelle ( souvent ces petits filins servent en hauteur ) alors il me faudrait installer un etau dans le panier de la nacelle prendre un petit chalumeau, et faire comme vous le faites à chaque objet à accrocher, je crois qu'à la fin de la journée mes collègues et mon responsable me disent : c'est tout ce que t'a foutu. Alors, très amicalement laissez tomber votre méthode pour le moins étonnante , munissez vous d'une pince coupante qui coupe pas émoussée , une vraie pas un truc ou il faut se péter la main pour couper quelque chose, déjà vous devez pouvoir couper votre filin très nettement si vous n'êtes pas sûr de vous, entourez juste votre câble d'une bande de ruban adhésif ( type isolant ) et allez y coupez votre coupe sera impeccable, mais c'est inutile une bonne pince suffit, si on veut aller dans les détails il existe des pinces coupantes à mâchoires droites ou biseautées c'est vous qui voyez.
Tu as raison. CEPENDANT, considérez ce type de contenu comme des conseils alternatifs sur les bonnes façons de faire le travail. Il arrive parfois que vous ne disposiez pas de l’outil idéal.
Merci d'avoir regardé!
@@brestore je ne le nie pas, mais maintenant vous saurez qu'un rouleau de ruban adhésif peut faire l'affaire, au delà chacun sa méthode, ce. n'était qu'un simple conseil.
Get a roll of sewing machine thread and wrap it around the wire. Add a drop of superglue and wait 5 mins. After drying, cut it using a chisel. It will be like new.
Except in will be in two pieces now.
Нормальные кусачки стоят не более 2к, купи и радуйся
Ok. Спасибо за просмотр.
Buy the right tool, problem solved
Ok, Thomas!
Thanks for watching.
Those pliers are for copper.😮
Yes, Wallerstein. BBut it was the only one I had at the moment.
Thanks for watching!
전단력 잡아당김에 차이
시청 해주셔서 감사합니다!
Просто купите кабелерез, предназначенный в том числе для резки тросов.
Привет, друг! Этот совет предназначен только для тех случаев, когда у вас нет подходящего резака!
Спасибо за просмотр!
यह गरर्म करने वाली मशीन नाम क्या है और कितने की आती है
नमस्ते Ghasiram Shilpkar!
उसका नाम है ब्लोटोरच बंदूक (blowtorch gun).
देखने के लिए धन्यवाद।
or u could move away from the 99 cent bin and buy a real pair of plyers
Ok. Thanks for watching.
Or you could just use cable cutters.
Yes, Mat! But if you don't have the cutter, use this tip!
Thanks for watching!
А зубилом перерубить, за один удар не вариант?
Привет, друг. Проблема в том, что стальной трос перетрется... Впрочем, я попробую!
Спасибо за просмотр!
А не применяя горелку можешь отрезать ровно?
Привет Mister Talala! Да, ты можешь. Тем не менее, кабель будет изнашиваться.
Спасибо за просмотр!
First he needs cutters that will actually cut it
Ok, JB.
Thanks for watching.
Не забудь выбросить кусачки!!!
Ok.
Спасибо за просмотр.
Стальной провод? Может трос?
Извини. Я не понял.
Спасибо за просмотр.
Or use Kleins.
I appreciate the tip!
Thanks for watching!
自分はテープを巻いてるわ😅
それは素晴らしいヒントですね、友人。
このヒントをここで示します。
czcams.com/users/shortsjdDEYfMUmuk?feature=share
Sharper cutters
Yes, Alvey!
Thanks for watching!
Those lake barriers they spread lol I mean they cut me a time or 2
Thanks for watching, Dale!
오~ 이런 방법이?
Я думал изолента будет там
Спасибо за просмотр, Ivan!
Roll scotch tape and cut😊
I will take this test! Thanks for the tip!
Thanks for watching!
Ou simplement utilisé une pince coupante qui coupe😂😂😂😂😂😂😂😂
Ok. Thanks for watching.
You need some better grip strength
Some better nippers
Some honestu
Тогда уж болгаркой пильни, не компосируй мозга
Извините, я не понимаю.
Купить себе нормальные бокорезы и не париться😂
Заточи инструмент
Спасибо за просмотр!
Не провод, а трос. В заблуждение не вводи, или может сам не знаешь???
Привет, друг. Думайте о подсказке и используемой технике, а не о представленном материале.
Спасибо за просмотр.
On voit clairement que votre pince n'a pas un bon " tranchant "
Oui! Tu as raison!
Merci d'avoir regardé!
Regardez ma nouvelle vidéo : czcams.com/video/4z9DcVDpz0Q/video.html
@@brestore je vous crois inutile.
"отпустил" метал и америку открыл?
Да! И я очень рад этому открытию... Лол.
Спасибо за просмотр!
Так вопрос в том как резать,а не пережечь 🤡
Вопрос в том, как резать без повреждений.
Спасибо за просмотр.
Не провад,а тросс
Ok.
Спасибо за просмотр.
Если не можешь обмотать концы, используй двое тисков!
Это хорошая идея, друг!
Спасибо за просмотр!
А где там провод?!
Это стальной трос.
Спасибо за просмотр.
какво значи "раздържане" ?
Здравей Диан! Къде видя думата "раздържане"?
Поддръжка означава: оправяне, коригиране...
Благодаря за гледането!
И потом там где грел он порвется
И где тут стальной провод???
Оцинкованое говно
Спасибо за просмотр.
стальной провод -это сильно
Купи нормальные кусачки
Привет, друг! Это совет на случай, если у вас нет резака.
Спасибо за просмотр!
Сваркой
Спасибо за просмотр!
Interessante
Fico feliz que tenha gostado!
Тросик класс, а инструмент гомно....
Извини, друг. Я не понял.
Спасибо за просмотр.
Tape it 😂
Yes, Jeremy! czcams.com/users/shortsjdDEYfMUmuk
Thanks for watching.
Saldatura a stagno poi tagliare
Grazie per il suggerimento, Filippo!
Guarda il mio nuovo video con 6 suggerimenti per rimuovere le viti con la testa danneggiata: czcams.com/video/4z9DcVDpz0Q/video.html
@@brestore non guardo nulla me bastato questo short ....
Всегда это делаю зубилом.
Я ценю совет, друг.
Объятья.
Купить тросорез
Привет, друг!
Да, в идеале резак. Этот совет используется, когда у вас нет резака.
Спасибо за просмотр.
Взял ваще размотал
Аплодисменты 🎉🎉🎉🎉🎉
Я ценю это, друг!
Книпекс, грос, нвс смеются
Спасибо за просмотр!
@@brestore а за комментарии?
Чувак, я не понял твой первый комментарий. По этой причине я просто поблагодарил вас за просмотр. Если вы что-то спросили, пожалуйста, перефразируйте вопрос другими словами.
Спасибо!
Это трос.
Всё в порядке, Алекс...
Спасибо за просмотр!
@@brestore достойное поведение
Привет из Бразилии!
@@brestore как там в Бразилии?
Что бы вы хотели знать о Бразилии?
Страна очень большая. На юге холодно. На севере жарко.
Мы в Южной Америке. Практически все страны говорят по-испански, а мы говорим по-португальски.
Солнце появляется каждый месяц в году. У нас сейчас зима. Сейчас 17º C. Ночью должно быть 9º C.
Люди счастливы и трудолюбивы. Преступность есть, но не такая, как показывают по телевизору. Страна была бы намного лучше, если бы не коррумпированные политики.
Самые популярные виды спорта - футбол и волейбол.
Что ж, извините за ошибки, я использую Google Translate.
Стальной провод это что то новенькое 😂
Kkkkkkkk.
Thanks for watching!
Разлом происходит в твоем черепе, а это тросс расплелся
???
Купи себе нормальные кусачки и не морочь людям мозги
ХОРОШО. Спасибо за просмотр.
Totally BS !!!👎👎👎
🙄😒
Кошмар- дебилен!!!
??????
Tape....nubie.
Yes, Frank... I already showed this tip on the Channel: czcams.com/users/shortsjdDEYfMUmuk?feature=share
Точно не твоим тупым способом😂😂😂
ХОРОШО. Спасибо за просмотр.