I would like to get one of those clutches for my ATV. It has the exact same motor. It would make it easier on rough terrain because you can't go less than 20mph or your in danger of stalling it out.
@@AZBADBOYz you can still use the clutch, the lever will still be there and still work. But from neutral you can shift down to first or up to second without pulling in the clutch, and just gas and go. Also if youre already in first second or 3rd you can come to a complete stop without even touching the clutch. It works really good in tight technical terrain at low speeds, and the bike wont stall.
Your products are awesome! We have run it on two 690 powered cars now. Would love to see it for some of the other engine options out there for competition like the Kawasaki 650, Triumph 675 or CBR
@@camerons.8322 i thought you were saying that these guys should make a CZcams Rewind.. lol.. I was like. 'umm .. No" ............ but I got it now......... I think everyone is underestimating the level of control that they are intentionally trying to manipulate us with.. including censoring who we cannot watch... CZcams rewind is full of the trash that they want us to be programed with; just go look at the "trending" page. Absolutely full of "authoritative news" main stream company garbage that no one wants to watch.. alongside vile and ignorant music videos and tranny make up sessions... Now if anyone "comes out" as gay, they hit the top of the trending page. It's very disturbing, and I don't know why any of us are still blindly using this trash platform, we all we have to do is jump over to the already available crypto systems that are being built. Brave, BitTube, Steemit, Minds, DTube... ect.. It's time for a mass exodus.
@@calholli Right. "They" as in CZcams/Google. I should've been specific. It is a shame how much they're warping the platform to shove more ads in people's faces while at the same time burying creativity under cheap garbage. Hopefully something like Bitchute, or Vimeo will give them some real competition.
I want to see it with the body back on it and driving somewhere where we can see it in action over some distance. Like that beach video. Awesome little vehicle!
I never really realized I was bald until I got my drone and got myself in the shots. lol Well... I knew I was balding but seeing it from above and behind.. hahaha
I love this channel. Found you guys about 2 weeks ago. Since then, I've watched most of your videos. Love the detailed fabrication design descriptions alongside the slow-mo editing. Surprisingly educational and entertaining!
I swear I could watch you guys build an entire project from start to finish all in one episode! The fabrication is phenomenal and execution is on point! Such an AWESOME channel!
They are great if you suffer from arm pump but require a whole new style to control your bike. Much different approach to obstacles. IMHO very tricky when it gets real technical.
Just found this channel but I already like how they build shit that actually rips, WITH suspension unlike carsandcameras nerfed little go karts with harbor freight engines that always seem to break down / get torn apart for other builds. .
That is not a 4 wheeler, it’s a 2 wheeler. You guys are really great at unique builds, and the video quality tells the story in an entertaining way. Thank you
Holy crap guys, that thing is absolutely one of the most phenomenal pieces of machinery I've ever seen, I have so enjoyed watching you build it. Seriously, thank you so much for sharing these videos, just plain wild.
I'm reminded every week with a new video, that you guys are doing my dream job. And it makes me happy to see you succeed! (even with the occasional blunder)
@@TheUAVpilot my dad used to work in a woodshop and he told me about the duct tape band-aids that they'd use to get a wound through the work day. Finish up the day and go to the hospital for stitches.
Ok, at around 13:02 with the on the gas power slide into a wheelie? That was frickin awesome! The Rekluse was the best $$$$ I spent on my CRF450, hands down. You guys have really hit a home run here; the comment about having an RC truck that you can drive was spot on. If you guys took orders on making those, youd never be out of work. Well done.
Wow You are are absolutely killling it. Y'all make building stuff look easy which means your fabrication skills are spot on. The content, presentation, and videography is amazing. Love watching your channel.
Dudes you guys are great! Another awesome video ;) My 2.5 year old son and I just had some lunch and watched this video, you guys appeal to a wide audience! Haha toddlers to grown ups ;) Thanks for posting
at 8:35 I love that you did something like that especily how you mixed in the slomo edits love guys you should do more things like that it helps me learn
Freaking love watching this thing shred. Crazy cool to watch. If you guys wanted to make it even more stable in the future you could probably extend the rear axle outwards, not as much wheeling but more stability and able to take acceleration better
lol. that was their original intention, now its just a drifting wheelie machine. haha. im sure its still a semi decent rock crawler too though. might have to soften up the first stage of travel on the front suspension a bit though. and i didnt see it in this video, but the total travel might not be as good as it could be on the front atm either. could definitely be mistaken though
You can use no clutch to shift with the stock clutch the rekluse just lets you stop and take off with no clutch motorcycle have sequential transmissions
You can do it with the stock clutch but having built a few motorcycle powered race cars with a rekluse clutch it is even easier and noticeably smooth no clutch shifting up and down
the old piranha. What a nice piece of equipment. The metal fab shop I used to work at had 2 of them just like that and we could do just about anything with smaller metals.
That semi auto conversion looks like it transformed the beast. Hopefully you can get the front suspension a little softer like you want. Are you sticking with that tire size forever?
CRAZY WEE WAGONS, AMAZING, JUST STARTED WATCHING TODAY AND NOW I’M STILL WATCHING HOURS LATER, , YOUS PUT THE LONG HOURS AND HARD WORK IN SO GLAD TO SEE YOUR CHANNEL IS STRONGLY MARCHING ON, RESPECT TROOPS. “🏴SCO”
I love this channel and get excited every time I video comes out. But you guys are really getting personal with your sponsors (Roman). How did you know I'm balding? Haha
Seeing the process and progression is absolutely bad ass! Not just for what it is, but the time and work out in. I hope you consider building another in a full scale Jeep:).
Hi guys I have two complaints with your videos, they are to far in between, and NEVER long enough excellent work Ethan and Edwin * Edwin, how about including "The Girl" occasionally every magician oops fabricator needs an attractive assistant !* Tony from Western Australia
Sweet... She gets better with every little tweek. Lovin the videos, I get disappointed when they're over, wishing they were longer.. Keep up the Awesome videos, looking forward to seeing the Odyssey ripping up the dirt like the Jeep.. Thanks For the Hard work you're putting into everything you do.
I agree with adding a skidplate or a wheelie bar to save that tire. I also think you should try putting larger tires on the back like most fourwheelers, maybe it’ll help control the wheelie-ing so much
Just when you thought you had witnessed one of the most awesome build series on CZcams... it gets an upgrade. These north Idaho boys gave Death a near Grind Hard experience.
Awesome build!...maybe when your done with the tv show...extend the wheels out..maximize stability so you can rip around corners with no concern of it rolling..you guys are killing it!
The steeper the angle of the shock the more travel you will get. If you really want some travel lay them horizontal and create a cantilever suspension set up. Also a hole saw with a center drill will make you a washer and drtll the center hole at the same time.
Maybe add a rear bumper/skid plate under the spare tire with two or three shallow fins/rudders to help track better while in a wheelie. Your builds are AWESOME!!
Your in Bonner County hu I was just up at Moyie this is crazy never thought twice about it I never think someone popular on CZcams would be up here lol good job guys that's awesome looks like a great ride
front suspension is sweet! i reckon if you move the upper mounting point of the rear coilover it should reduce the tendency to wheelie as much as more of the weight of the driver is supported by the suspension, rather than acting as a larger lever, creating a greater moment on the whole system.
Glad you guys are enjoying your new RadiusCX auto clutch. Great video!
-Rekluse team
Hey! How does it work? I'm guessing like a normal clutch pack with a kind of lsd sorta set up to ramp up pressure on it?
I'm an ex-bike racer/rider and know nothing of these. So you can ease the clutch out and just sit still and stop without pulling the clutch?
I would like to get one of those clutches for my ATV. It has the exact same motor. It would make it easier on rough terrain because you can't go less than 20mph or your in danger of stalling it out.
@@AZBADBOYz you can still use the clutch, the lever will still be there and still work. But from neutral you can shift down to first or up to second without pulling in the clutch, and just gas and go. Also if youre already in first second or 3rd you can come to a complete stop without even touching the clutch. It works really good in tight technical terrain at low speeds, and the bike wont stall.
Your products are awesome! We have run it on two 690 powered cars now. Would love to see it for some of the other engine options out there for competition like the Kawasaki 650, Triumph 675 or CBR
Strictly speaking, it isn't necessary to optimise castor for any vehicle that has its front wheels in the air most of the time.
BUT! When he have to adjust the front before the next wheely he can ! xD
:-D
I wish there could be more quality content like this on CZcams. You guys are awesome.
The first three mins are ads... from a cltuch sponsor ad, straight into a hair loss ad...
My boys are trying to get.. pa pa pa PAID.
Right? If they actually tried to make a good CZcams rewind, this channel would be a great add.
@@camerons.8322 i thought you were saying that these guys should make a CZcams Rewind.. lol.. I was like. 'umm .. No" ............ but I got it now......... I think everyone is underestimating the level of control that they are intentionally trying to manipulate us with.. including censoring who we cannot watch... CZcams rewind is full of the trash that they want us to be programed with; just go look at the "trending" page. Absolutely full of "authoritative news" main stream company garbage that no one wants to watch.. alongside vile and ignorant music videos and tranny make up sessions... Now if anyone "comes out" as gay, they hit the top of the trending page. It's very disturbing, and I don't know why any of us are still blindly using this trash platform, we all we have to do is jump over to the already available crypto systems that are being built. Brave, BitTube, Steemit, Minds, DTube... ect.. It's time for a mass exodus.
@@calholli Right. "They" as in CZcams/Google. I should've been specific. It is a shame how much they're warping the platform to shove more ads in people's faces while at the same time burying creativity under cheap garbage. Hopefully something like Bitchute, or Vimeo will give them some real competition.
I agree with you but the big five arent going anywhere.
You should make a 1/8 inch skid plate that covers the bottom of the spare tire so it won’t dig in
Really good idea!! Botham plate, maybe also one in the front
I've been thinking little wheelie wheels, but I honestly like this idea better.
Move the spare tire to the front bumper and the petrol tank just behind it.
Richard Roper sorta copy an engine skid plate. Give it a wrap around effect
Also, potentially a kind of angel hoop over the driver?
This is like an RC bash truck that you can actually drive. So sick!
It requires some dunes
Hopefully they'll take it back to sandlake
Yes! And stretch the front end, put paddles on the back, with rubber bands in the front 😂😂😂
The music, the editing, the driving, the machine just.....
Amazing.
Keep up the awesome job guys an you will be at 1M subs In no time
In 50 years, this is going to be sitting in an old garage, and some kid is gonna be so happy when he finds it 😆
Ye until he hits a tree and smashes em self up😂
Or he will not be happy because his mother will find it too dangerous ahaha!
I am building a CBR600 buggy, check it out :)
No way. I think these guys will drive it to the ground.
@@Goathierbmw will do pal👌
@@spacenorman8624 I would
I want to see it with the body back on it and driving somewhere where we can see it in action over some distance. Like that beach video. Awesome little vehicle!
I would totally buy a powerwheels jeep or hummer with a 450 from y'all. Keep up the good work.👍👍
Same here.
Damn why do you have to hit me with a hair loss ad..... what are you trying to say??
Go Chrome. Bic it and wax it ;)
@@OakKnobFarm that's what I had to do
I never really realized I was bald until I got my drone and got myself in the shots. lol
Well... I knew I was balding but seeing it from above and behind.. hahaha
Would you rather being hit with that or, the herpes option on that same page?
Im only 34 and almost completely bald on top. It all started in my early 20's. I totally crapped out when I rolled the hair dice:(
Probably oughta put a small skid plate on the spare tire before you drag a flat spot in it..
The Barbie car is one of the most bad ass creations I've ever seen,you are an awesome fabricator man.
You're good with the welder , please make some roll over protection for the driver 👍
That will just ruin the way it looks. You know what they should do for roll over protection?
Don't roll it.
I love this channel. Found you guys about 2 weeks ago. Since then, I've watched most of your videos. Love the detailed fabrication design descriptions alongside the slow-mo editing. Surprisingly educational and entertaining!
I swear I could watch you guys build an entire project from start to finish all in one episode! The fabrication is phenomenal and execution is on point! Such an AWESOME channel!
New logo is pretty sweet. I also love how you guys hang the vehicles to work on them rather than doing it on the ground or a table.
Dang! Did not realize how awesome Rekluse Clutches are... Might have to look into it for my bike.
Yes they are absolutely awesome!! Sure makes trail riding a lot better IMO
They are great if you suffer from arm pump but require a whole new style to control your bike. Much different approach to obstacles. IMHO very tricky when it gets real technical.
Skinny Pedal Productions they costs too much tho
they are great for this purpose. but for a dirt bike i would far rather continue using clutch control etc. avoiding a stall is half the fun.
just don't get stuck half way up a hill
Just found this channel but I already like how they build shit that actually rips, WITH suspension unlike carsandcameras nerfed little go karts with harbor freight engines that always seem to break down / get torn apart for other builds. .
Those guys have nothing on Ethan's engineering skills. I totally dig them, but it's kinda like play time while this is serious fun.
That is not a 4 wheeler, it’s a 2 wheeler.
You guys are really great at unique builds, and the video quality tells the story in an entertaining way.
Thank you
Holy crap guys, that thing is absolutely one of the most phenomenal pieces of machinery I've ever seen, I have so enjoyed watching you build it. Seriously, thank you so much for sharing these videos, just plain wild.
I'm reminded every week with a new video, that you guys are doing my dream job.
And it makes me happy to see you succeed! (even with the occasional blunder)
Nice electrical tape bandage for that exhaust burn. Hope that heals up soon.
In the bodyshops we use to call it The 3M medical Plan.
@@TheUAVpilot my dad used to work in a woodshop and he told me about the duct tape band-aids that they'd use to get a wound through the work day. Finish up the day and go to the hospital for stitches.
Ok, at around 13:02 with the on the gas power slide into a wheelie? That was frickin awesome! The Rekluse was the best $$$$ I spent on my CRF450, hands down. You guys have really hit a home run here; the comment about having an RC truck that you can drive was spot on. If you guys took orders on making those, youd never be out of work. Well done.
Wow You are are absolutely killling it. Y'all make building stuff look easy which means your fabrication skills are spot on. The content, presentation, and videography is amazing. Love watching your channel.
Dudes you guys are great! Another awesome video ;) My 2.5 year old son and I just had some lunch and watched this video, you guys appeal to a wide audience! Haha toddlers to grown ups ;) Thanks for posting
Builds overkill front suspension, proceeds to not use it at all by doing wheelies
I mean...you gotta come back down
Exactly ^^
Makes dumbass statement proceeds to never get viewers on his channel.
at 8:35 I love that you did something like that especily how you mixed in the slomo edits love guys you should do more things like that it helps me learn
I am always super jealous whenever the piranha makes an appearance.
Add some weight at the front! Not so much it won't wheelie, but enough to make it more stable. Just my humble opinion.
Also to help it steer :D
ooooor awd it. much more work but imagine...
Next up!
4 wheel drive.
😉
@cccarnivore of course!
Why drive the front tires when they're never on the ground? lol
Freaking love watching this thing shred. Crazy cool to watch. If you guys wanted to make it even more stable in the future you could probably extend the rear axle outwards, not as much wheeling but more stability and able to take acceleration better
The quality of your content is unreal. Wish there were more channels this good!
Damn! Please make a video of nicely slowly rock climbing. Since, that was partially part of the build lmao.
lol. that was their original intention, now its just a drifting wheelie machine. haha. im sure its still a semi decent rock crawler too though. might have to soften up the first stage of travel on the front suspension a bit though. and i didnt see it in this video, but the total travel might not be as good as it could be on the front atm either. could definitely be mistaken though
I guess you guys should raise a little bit the rear spring preload. You can see in the video that sometimes the shock goes all way down.
Preload is for sag. Spring rates are what need changing
jonnoMoto I guess you’re right dude. I’m not a expert in springs and all that stuff. 🤙🏻
Skid plate for the back, move the spare tire to the front bumper with the petrol tank tucked in behind. Should help make it bit less wheelie prone.
Front end looks great and works the same. The little extra weight up front didn’t hurt either according to the video evidence. Nice work!
I was hoping for a lap around the track LOL that thing is sick
2 words: Mass production! (Figure it out...)
The production, the new song, the upgrades, this whole video was fucking nuts
Glad you guys got that front end more sorted out. The reckluse clutch was a very good idea. We have used those in cross country racing for years.
this needs to be mass produced 🚗,....
You can use no clutch to shift with the stock clutch the rekluse just lets you stop and take off with no clutch motorcycle have sequential transmissions
You can do it with the stock clutch but having built a few motorcycle powered race cars with a rekluse clutch it is even easier and noticeably smooth no clutch shifting up and down
the old piranha. What a nice piece of equipment. The metal fab shop I used to work at had 2 of them just like that and we could do just about anything with smaller metals.
Can't wait to see what you guys want to do next to the Barbie Jeep
That semi auto conversion looks like it transformed the beast. Hopefully you can get the front suspension a little softer like you want. Are you sticking with that tire size forever?
Forza horizon 4 needs to put your creations in their game 😁
We would love that
Everything from the fabricating to the video editing is fantastic. When you guys have perfected the Barbie, I want one. 😁
CRAZY WEE WAGONS, AMAZING, JUST STARTED WATCHING TODAY AND NOW I’M STILL WATCHING HOURS LATER, , YOUS PUT THE LONG HOURS AND HARD WORK IN SO GLAD TO SEE YOUR CHANNEL IS STRONGLY MARCHING ON, RESPECT TROOPS. “🏴SCO”
I see you got your hand wrapped. Are you aiight from that burn man? You took it like a gosh darn champ¡ lol love ur fab work. Editing is on key too
I love this channel and get excited every time I video comes out. But you guys are really getting personal with your sponsors (Roman). How did you know I'm balding? Haha
Seeing the process and progression is absolutely bad ass! Not just for what it is, but the time and work out in. I hope you consider building another in a full scale Jeep:).
I love the Beatle Adventure Racing music in the background. So classic
So glad you noticed
I'm a big guy.. like I would crush a go-cart.. but this is so damn awesome I want to build one!!
It can also be a good motivation to loose some pounds. Better health + gokart fun thats a win win.
@@brutallyhonestmf5578 I'm loosing weight, trying to lean out my mass is the hard part..
@@TripleXclown yeah I agree
Hi guys I have two complaints with your videos, they are to far in between, and NEVER long enough excellent work Ethan and Edwin
* Edwin, how about including "The Girl" occasionally every magician oops fabricator needs an attractive assistant !*
Tony from Western Australia
I've never been super crazy about this build but those wheelies are insane
Loved the view at the end, and loving the build
Awesome work you Guys! Thank you so much,
Rich.
i love ur vids man
keep up the good and hard work
I’m glad you guys took my advice and bought a recluse clutch it is completely changed the ride hasn’t
Sweet... She gets better with every little tweek. Lovin the videos, I get disappointed when they're over, wishing they were longer.. Keep up the Awesome videos, looking forward to seeing the Odyssey ripping up the dirt like the Jeep.. Thanks For the Hard work you're putting into everything you do.
How do I sign up to ride this.... this is on my life goals bucket list, and to meet you guys
Sick new logo when are the stickers coming out I will buy them
This Channel is so cool I don’t even mind the ads tbh
I agree with adding a skidplate or a wheelie bar to save that tire. I also think you should try putting larger tires on the back like most fourwheelers, maybe it’ll help control the wheelie-ing so much
Love the content keep up the good work guys 🔥🔥👌🏻
hey, that 3 2 1 go song is starting to get in my nerves =/ maybe try talking w/o it going on in the background. just a thought
How is there not a company making something like this?! I would buy it in a heartbeat!
Just when you thought you had witnessed one of the most awesome build series on CZcams... it gets an upgrade.
These north Idaho boys gave Death a near Grind Hard experience.
Notification squad
Yewww!
Awesome build!...maybe when your done with the tv show...extend the wheels out..maximize stability so you can rip around corners with no concern of it rolling..you guys are killing it!
I love the Beetle Adventure Racing soundtrack... brings back those awesome n64 memories. Sweet lil project!
So jelly!! Yall have too much fun
It is always nice to have a backyard that wide, and garage like that , , , , , Nicely done 👍
The steeper the angle of the shock the more travel you will get. If you really want some travel lay them horizontal and create a cantilever suspension set up. Also a hole saw with a center drill will make you a washer and drtll the center hole at the same time.
Hey guys! For more stability and tighter cornering on dirt, throw a few degrees of toe-in on the front wheels. it's what we do on the rally car.
I love the hairloss ad part way in, LOL. It is totally worth sitting through to watch the video!
Maybe add a rear bumper/skid plate under the spare tire with two or three shallow fins/rudders to help track better while in a wheelie. Your builds are AWESOME!!
Easy guys, don’t smack a tree at those speeds! Looking good as always, very trick clutch.
11:20 WTF is that thing?!!! I thought I was the king of mad creations but you guys never cease to amaze the hell outa me!
Wheelie has to be a world record for Barbie Jeep wheelie 😅💪👏love the logo 💀
You should put air shocks all the way around. Would make the ride way more softer. Plus you can add more air or less...
Yah but they don't cope with jumps/slamming but or high speed bumps
It's so perfect the sponsor for this video was ED meads while fixing up the barbie princess jeep. XD
That drone shot looking straight down was really awesome!
Thanks! We have to use the drone more
I have three rek clutch’s on different bikes. AWESOME!!! Just make sure you set up and adjust it properly
Who ever gave this vid a thumbs down is CRAZY to put it lightly!!! Love you princess 👸!!!
I dont even mind watching the ads on these videos its worth it
It needs a wheely bar
Best big boy toy builders around, this thing is so wicked and just keeps getting sicker. Nice job dudes!
When in Rome... Tear it up with a Barbie Jeep. Roman. lol I love you guys builds!!
I could watch hours and hours of this go cart it's just so crazy!!!!!
13:00-13:05 absolutely AWESOME! Surgical ... I'm gonna have to work on my fab skills because I definitely have to have one
Just started watching you guys and immediately subscribed. Didn’t know you guys are from North Idaho. Hello from East Idaho.
Ever heard of Helicoils? You can repair stripped threads with them. Rebuilt a Caddy Aluminum block that I had to Helicoil the Mains. Worked great.
Your in Bonner County hu I was just up at Moyie this is crazy never thought twice about it I never think someone popular on CZcams would be up here lol good job guys that's awesome looks like a great ride
You guys, I don't know how you do it, but your content is amazing and straight up down to earth. keep it up ya'll!
Can’t wait to see the TV show you guys deserve it, great content as always and the cinematography it as amazing as ever
front suspension is sweet! i reckon if you move the upper mounting point of the rear coilover it should reduce the tendency to wheelie as much as more of the weight of the driver is supported by the suspension, rather than acting as a larger lever, creating a greater moment on the whole system.
Genius idea using the ratchet straps to hold it in the air!
Your content has gotten so much better Spence you first started
The most wicked little rig!! Your fab skills make me jealous!
Now all you need is a G.I. Joe army jeep so yall can chase each other around. That damn thing is a piece of badassory! Even in pink and powder blue.