I’m Oliver for more details and discount please add my Facebook: facebook.com/profile.php?id=100083176249155 Or my whatsup +8619376345156, i-message/facetime:008619376345156
What I'd like to know is how to bind the receivers. I got pretty much everything to work, except anything from channel 12 upwards. I can change back and front controls, but I can't get the Seat to spin, nor the diff lock or the rotating light. Also, the sound sounds garbled and horrible. I wonder what I am missing.
@@toucanhobby2400 Ok, so after quite a bit of googling, it seems the PL18 EV can do this. Quite easily... I don't know why it's so hard to find or why the information is not provided. Anyway, with the most current Firmware version for the PL18 EV (not just the lite!) you can control more than one receiver without having to use a patch cable or use combine models. And the channels append. Meaning the 2nd receiver will be added to the max channels of the first. Totalling a high channel setup. You need at least Firmware(1.0.28). For anyone who upgrades the Firmware: An update will erase all your models. Backup your models before you do this with the FlySky Assistant (if you can get the dodgy software to actually wok ^^).
I’m Oliver for more details and discount please add my Facebook: facebook.com/profile.php?id=100083176249155 Or my whatsup +8619376345156, i-message/facetime:008619376345156
Very good exploration of the inside. Thanks.
Can u make video on hydraulic valve
The valve for which model?
Ok this back hole? Later when I receive next one will try to explain
What I'd like to know is how to bind the receivers. I got pretty much everything to work, except anything from channel 12 upwards. I can change back and front controls, but I can't get the Seat to spin, nor the diff lock or the rotating light. Also, the sound sounds garbled and horrible. I wonder what I am missing.
Did you bought it ready to run? Please add me friend to see details
@@toucanhobby2400 I bought without the PL18 EV Lite since I already had the PL18
@@Boomer3k PL18 can not control backhoe not enough functions switch, at least need EV lite
@@toucanhobby2400 Sorry, I should have also added the ev. I do have the PL18EV.
@@toucanhobby2400 Ok, so after quite a bit of googling, it seems the PL18 EV can do this. Quite easily... I don't know why it's so hard to find or why the information is not provided. Anyway, with the most current Firmware version for the PL18 EV (not just the lite!) you can control more than one receiver without having to use a patch cable or use combine models. And the channels append. Meaning the 2nd receiver will be added to the max channels of the first. Totalling a high channel setup. You need at least Firmware(1.0.28). For anyone who upgrades the Firmware: An update will erase all your models. Backup your models before you do this with the FlySky Assistant (if you can get the dodgy software to actually wok ^^).
It's complicated for an inexperienced person xD too many variables