Infinite Rule has some great products for sure! Ive had my locking hitch pin for around the same amount of time and its held up well. No complaints at all
Ended up ordering a brand new set of the stainless ones for my Andersen Rapid Hitch and im glad I did. I really didnt think the quality could get any better but somehow they surpassed my expectations for it. Totally worth the money!
The Furnace on my Brookstone 398MBL did the exact same thing. The water is coming in around where the furnace is screwed into the side of the rv. Remove those screws, bend the tabs down and that plastic piece will come off. Run a bead of silicone around it and put it back. Problem solved. I had mentioned this in the comments when you first mentioned this issue around a year ago. I'm betting your new board will mess up once the next heavy rain comes in because that box is not sealed from Coachman.
I think the small white ring/tube that was in the package with your control board for your furnace was to slip over the four corner post to release the clips so the board could slide up and free of the pins. I would’t bet the farm on it but that was just a guess. Have a good day!
Hey Just came across this video. I like the circuit board change out. How much was it? If it were one on a house furnace it be $1500-$2000 dollars. The BW needs total of 4 locking pins doesn’t it. Excellent video
7:15 your welcome 🙅🏻♂️
Thanks for sharing the furnace repair
Infinite Rule has some great products for sure! Ive had my locking hitch pin for around the same amount of time and its held up well. No complaints at all
Ended up ordering a brand new set of the stainless ones for my Andersen Rapid Hitch and im glad I did. I really didnt think the quality could get any better but somehow they surpassed my expectations for it. Totally worth the money!
I would clean up the corrosion and hang on to that board. Doesn’t look like it’s in the best spot to avoid moisture damage.
The Furnace on my Brookstone 398MBL did the exact same thing. The water is coming in around where the furnace is screwed into the side of the rv. Remove those screws, bend the tabs down and that plastic piece will come off. Run a bead of silicone around it and put it back. Problem solved. I had mentioned this in the comments when you first mentioned this issue around a year ago. I'm betting your new board will mess up once the next heavy rain comes in because that box is not sealed from Coachman.
Awesome, I will be getting the tow&stow B&W hitch for my Denali I want to get those.
I think the small white ring/tube that was in the package with your control board for your furnace was to slip over the four corner post to release the clips so the board could slide up and free of the pins. I would’t bet the farm on it but that was just a guess. Have a good day!
Does anyone know why they are using old style through hole components on the circuit board instead of surface mount?
BOLT hitch locks are the way to go. Use the truck key instead of adding another to my overloaded keychain
Hey Just came across this video. I like the circuit board change out. How much was it?
If it were one on a house furnace it be $1500-$2000 dollars.
The BW needs total of 4 locking pins doesn’t it.
Excellent video
Is it necessary to lock the attachment? It can’t be removed
Happy Thanksgiving!!!
How well are pins holding up ?
What keeps the shield over the exhaust from flopping in the wind while towing?
It is held in place by springs. I'm guessing the vented nature of the cover allows air to flow through it.
Do you ever use an impact driver to run screws in and out?
@btbrv1414 I used to use drills then a contractor friend let me use his impact. Could never go back. I use Ridgid, lifetime warranty tool and battery
@btbrv1414 all the time, try it, you'll love it
Your trailer link does not work. Good video
Ha… those wafer core locks can be picked in about 30 seconds.
You have a scammer offering gifts buddy just thought you should know
You should of unscrewed the locks so we could see the thickness underneath the locking mechanism. Come on man ! lol
Dumb location to keep the board dry…. How long will it last ? Nobody knows because it is crappy engineering !
Don't show the locks to @lockpickinglawyer!🤣
Took him 30 secs without even trying...
Cover it with aluminum foil