Overview of my Modded 2002 Infiniti QX4
Vložit
- čas přidán 27. 07. 2024
- THE WHEEL INFORMATION I PROMISED:
ProComp #: PCW51-5883
Wheel Size: 15x8
Bolt Pattern: 6x5.5
Backspacing: 3.75"
No you can't buy this bumper anywhere, but you can talk to any competent fabrication shop and have them make you one for a few hundred bucks. Here's some pics you're welcome to use as a reference:
www.nissanpathfinders.net/foru...
Curious about lifting your R50? Check out this EXCELLENT video by my friend Tyler:
• Pathfinder/Qx4 R50 Lif...
In this video I go over the mods, significant repairs, and future mods for my 2002 Infiniti QX4. As always, if you have any questions feel free to comment below and I'll do my best to answer quickly and thoroughly!
nissanpathfinders.net/forum
Follow me on Instagram! @mjotrainbrain and @projectrustyrunner - Auta a dopravní prostředky
absolutely in love and very jealous. I drive a 1998 QX4 and it has never failed me once. I have had so many good memories in it and the amount of girls that have seen the backseat....yea I'll just leave it at that. Still my daily driver at 214,000 miles.
Michael Leonardo It's great hearing your story! Mine's crispy fresh at 140,000 miles, can't wait for what the next hundred have in store. It's amazing how much of our lives are connected to these big pieces of metal.
Got another 1998 QX4 and she’s a keeper, looking to make plenty of modifications as it’s a sentimental and a dream car for me
@@elijahedwards7200 My girl has been my rock, but she also has alot of mechanical problems due to the idleness of the previous owners. She performs regardless but Id love to start getting her back into prime condition. I just have no idea where to start. Suggestions?
@@iamethnique well I imagine I’m not much far ahead of you if at all, I haven’t done much, but I suggest you get any essential matters or problems of the car taken care of before you do any modifications
I’ve got a 2002 QX4 with 130k miles. Your car is my end goal for the car.
Nice, pretty much the same as mine, minus the mods. Now to add those, thanks for commenting!
I love what you’ve done with that QX4. They are quite a bargain these days! Considering purchasing one as a new daily.
They really are a great bargain, especially when you compare costs to other similar 4x4's.
Awesome build! I'm looking to buy a R50 soon! Now I'm inspired even more!
Niran T Thank you, good luck with yours! Make sure to inspect thoroughly for rust, Especially in the front wheel wells around the struts.
Beautiful QX4 it gives me a lot of inspiration. I'm glad I don't live up north keeping up with all that rust repair would be a bit too much for me.
Yeah, rust repair is a lot of work. Gearing up for a full frame swap on my 4Runner sometime within the next year...ugh. Oh well, I don't like alligators or scorpions so I'll stay up here. ;-)
Sweet truck, I’m currently doing a 2 inch lift my 01 Pathfinder LE. Thanks for the wheel specs
You'll love how a 2 inch lift looks! And no prob about the wheel specs. 👍
Well damn....I was just about to ask you about your bumper/winch setup then I decided to check the description first. Thanks for the pictures though, about to check them out. I actually work at a fab shop so I might even be able to rig it up for just the cost of materials. 👍👍👍
Sounds awesome! Made any progress yet?
I just got my first qx4 and let me say I’m honestly surprised but how smooth it rides and I would love to see more video on the vehicle
This thing is gorgeous, I have an 01 LE pathfinder all black as well! Tried to go with 2.5-inch spacers and blew through 3 CV axles in about 2 years. Don't think I would have made that mistake if I watched this video beforehand
Sorry for the late reply, but glad to see your comment! Sometimes you live and learn, I did the same thing. Check out Tyler Smith's CZcams channel for lots of great technical R50 info, especially about suspension and drivetrain.
Nice rig man! I'm a pretty big die-hard Toyota fan boy but there's something about the R50 body style that I just really like.
I agree, the R50 is a nice looking vehicle, especially when done up right.
I got a 02 QX4 and its got 87k on the dash, been wanting to give it a meaner look and definitely gonna go with something similar to this. Looks great man
Woah, low miles!! Should make a sweet build, glad I could serve as some inspiration!
I love yours, mine is silver and it only have 77,000 miles and I bought it for 5k because the previous owner had an accident but the front bumper was the only thing damaged, everything else looks like brand new, I love this SUV a lot and it's a very capable machine!
Wow, very low miles! They sure are capable machines and yes they do look fantastic, you'd never know that it's a 15 year old car, let alone a 20 year old design! Hopefully you can get that bumper taken care of, it can be a real classy car when put back together.
Im looking into buying a 2002 with 150.000 miles right now, gonna drive out two hours tomarrow and I am super excited, I really wanted to find something out of the ordinary, I dont want to be just another jeep owner and so I am super excited to build up a qx4. Thanks for hte overview.
How'd it go?
@@mjotrainbrain6167 I wish it went… I still haven’t gone out… I’m talking with the guy right now about it still just seeing if I can talk him down since I don’t need a daily and just a project. But if I do get it I’ll give updates. I’m really excited
Right on, good luck! Hopefully you can get it for a fair price, they're really fun cars!
That is one badass suv! Bravo! 🎉
Lol @ 03:43, I have (99 in color gold/tan QX4, 3rd owner) never knew they could reclined. Thanks for info bro!👍
It's a neat little feature for sure!
This car looks great. Clasic boxy body, timeless !
Thanks, it really is a nice looking automobile!
Beautiful truck. I’m going to go check one out Today I found on Craigslist hopefully everything goes well. I want to put the big wheels like you have.
Thanks, good luck with checking out that truck! Once you have it there's certainly a lot you can do to make it really cool.
Nicely done !!
I bought an 01 with 160k runs and shifts perfect BUT has a few issues , fog lights , horn , 6 disc player is stuck and both power seats do not go forward or back but do recline and up down
Thank you! Sounds like just the right amount of a project, all fixable things for sure! Good luck and have fun with it!
Nice off road vehicle, thanks for sharing👍.
Thanks!
Love your mods. I have a 2001 SE 3.5 4x4 with a 5 speed manual. So much fun to drive. Put a sport exhaust on it. So far thats all. What kind of consideration do you recommend for a custom front bumper?
These engines sure sound nice with a good exhaust! And I'm sorry, not sure what you're asking in your question?
Awesome truck:) take care of it man haha btw I just picked up a 2003 Pathfinder Chilkot and will be lookin to add more stuff for it
Thank you! Congrats on yours, feel free to ask any questions you have, and be sure to check out nissanpathfinders.net/forum if you haven't already!
mjotrainbrain616 will do thank you :)
mjotrainbrain616 hey bro how are you doing? I just have a question so I finally got my 2003 Pathfinder 3.5 Chillkot edition. I think my bolt pattern is 139.7 x 6. Would these rims fit on it? And do you know what are some other options that look this good :) I’m going for steelies with some all terrain tires I have no lift or anything it’s completely stock what do you recommend. Thank you in advance
The rims I linked in the video description will fit! I'm not sure what the bolt pattern is in inches, but I know in inches it's 6x5.5 I would say any name brand all terrain would be good, but if you have the money I've really like my BFG KO2's! Also, the biggest tire you can fit stock without trimming would have to be no more than 31" tall.
Hey, really appreciate the video. I've been looking into doing a similar build. QX4's are very affordable in my area. Do you regret not going with a typical 4runner or jeep?
Glad you like the video! I honestly don't. Compared to a 4Runner, there are very little differences unless you want to do a more extreme build (which is where the advantage of a real frame will come in), and I believe that the luxury/daily driver features that you have to give up for a Jeep aren't worth it (unless you get something like a Grand Cherokee, but those don't have the legendary reliability of these Nissan rigs). The only thing I don't like about my QX4 is the rust, which has made me consider selling it and buying an Xterra, but I've decided instead to fix it, because I'll be happier in the long run! Hope that answers your question, good luck moving forward!
I have 2003 qx4 same the one u have please please I want the same bumper you have help me this my number my email b.almarri2014@gmail.com I really want to buy the same bumper
I’m 16 years old and I have a Qx4, I plan to do the same thing with mine!
Awesome! I got mine when I was 16, it's a great car to have!
Hey I know this is an old video but I was just browsing some vids on older Nissan Pathfinders...I've had two 92 Jeep Cherokees mild trail rigs bit went through a hard time and lost all my toys.also had an 85 Toyota pickup 4x4 that I had big plans for...anyway I hope to build me another trail rig soon and I wondered how Nissan's and infinity's did off road and what years had most dependable IFS.SINCE I'm more used to solid axle rigs..anyway if u ever read this,u got a nice rig buddy and enjoyed the video!! From Milledgeville Georgia,have a good one!
Sorry for the late reply! Sorry that you lost all your toys, that's rough! Most Nissan trucks have "undesirable" IFS (most have McPherson struts or torsion bars) but it's totally workable and they'll wheel just as well as other IFS rigs, you're just not gonna have the option of a sweet setup like a late model Toyota with long travel. If you can find one that isn't rusted a first or second gen Pathfinder or Xterra can make a great rig platform.
Can you run those wheels and tire combo without lifting the truck?
Nice set up man! I’ve been looking at one of these, possibly the Pathfinder. How many miles were on the clock when you picked this up? How much did you pay for it? Are you still rocking this bad boy?
Hi there. Thanks for making this video. Im looking to do the exact set up as yours on my qx4. Did you run those tires with the stock bumper? Did they rub? My qx4 isnt going to see any off roading just a few trips to lake tahoe here in California and a lot of street driving.
Chris Orozco Sorry, I did not. I'm sure it would rub a bit, but I bet it would be little enough that you could trim it in a way that looks good. I did have to trim it the back door end of the fender to allow for full turning, so now theirs a hole that let's mud get all over my door hinges, lol
Hey Man nice Rig👍
Thank you very much!
Awesome truck!!!! Love the stance and the wheels. What rear shocks will you use? Do you have a part number
Than you! Unfortunately I never ended up upgrading the shocks. I would use a Bilstein shock of some kind, check out nissanpathfinders.net/forum for advice on exactly which ones to get.
Will these mods work with 2001 QX4? I’m planning to make my truck like yours. I love your car man!! Good job!
Yup, they will absolutely work! If you have any further questions feel free to ask them here, via DM on Instagram @mjotrainbrain, or via PM on nissanpathfinders.net/forum where my username is mjotrainbrain. If you haven't yet, check out nissanpathfinders.net/forum, it's a great resource!
Just to make sure because I’m interested in running the same wheels on my 01 QX4. They are the pro comp 51 series 51-5883 3.75 back spacing and 108.0 center bore. What offset are you running -19mm or 0mm? I’ve been looking at 16’s but they all have 4inch back spacing and from my research it lead me to believe only 16’s clear the brakes so I’d rather go with the 15x8 that you have but I’d hate to buy them and they not work.
buy a set of front springs and put them in the back i did that and it works great the front springs are thicker then the back springs put the spring upside down it fits perfectly and then put a spacer to make it fit tight
Ihab Ghazal the from doesn’t flex
Very nice! I was wondering where you purchased the running boards? My oem ones rusted away years ago. I recommend to everyone that they remove them before your rocker panels get destroyed. The rust metastasizes and spreads to the panels quickly. Then, moves into the rear door jamb as you demonstrated in the video, and also into the wheel wells. For some strange reason, the driver's side rusts worse than the passenger on these vehicles very consistently.
I believe I ordered them on Amazon but I don't remember exactly, it was about 3 years ago. They are made by Westin. Absolutely important to replace rusty parts ASAP! It is interesting that the driver's side rusts quicker isn't it? If anything I would expect the passenger side since it's on the side of the road that may not be plowed as well.
@@mjotrainbrain6167 Yes, I have studied my vehicle closely over the years (purchased off showroom floor in 2001). My conclusion is that the water runs off the vehicle more on the driver's side than passenger. It is a strange phenomenon. Perhaps the weight of the vehicle favors the driver's side ever so slightly, and the water follows that lesser resistance? After you wash it, immediately open all four doors, and see if more water has collected in the driver's side door jambs. Use dry rags to wipe down each side individually. I bet the rag on the driver's side is more moist than passenger. The gas filler line rusts out as well. Mine occurred after the safety consumer recall. Also, be prepared to replace a couple of solenoids (the swirl valve) for certain. Order it through the dealer, and do it yourself. The dealer will gouge you severely, and average joe mechanics will have to go through the dealer for the part too, and charge you to figure out where it is located. (It is below the engine cover on the front. You can slightly bend the bracket to remove/install, and just requires a screw driver). I replaced the front struts and springs last year, and am getting ready to replace all the rear suspension parts through Rock Auto). I've done other work, but will spare the details as I am running long.
@@gregcromer8406 Interesting, I never noticed that by would certainly believe it. My fuel filter line also rusted out, also out of the recall range. Luckily not terribly expensive or difficult to replace. I no longer have the vehicle so I don't have to worry about those things lol. Glad to hear the story of somebody who's stuck with that vehicle for so long!
Great rig, mods, and video. Sorry about the rusting. Very informational my friend!
GTAO Vlogs Thank you, I appreciate the compliments sir!
Any rubbing or clearance issues with the tires?
@@bpd1969mag Sorry for the late reply, but yes. In the rear it stuffed into the fender pretty good when flexing, although ~2" extension on the bump stops with a body lift spacer and longer bolt would have solved that. In the front I don't know how clearance would be on the stock bumper since I upgraded the bumper before getting the tires, however I did also have to trim some metal off the lower back corner of the fenders to allow for turning.
Planning on getting 02 132k
Hey bud love your truck one question for now where did you get the rear cargo cover?
Sorry for the late reply, I found it in the junkyard. Took me many months and dozens of wrecked rigs to find one in good shape. Gotta keep your eye out and eventually you'll find one!
How do you feel about the 4.3 hearing? Could use a pop rivet or a screw rivet for the CB mike
The gearing was fine, I didn't feel like it was lacking power at all, however keep in mind mine had the much more powerful 3.5L engine. I would have liked to swap to the 4.636 gears at some point, but for the small difference it would make I didn't feel that it was particularly worth all the effort. A rivet would have been a great idea for the CB mic, should have done that.
I am in the process of getting a Pathfinder or Qx4. What size tire could I get away without a lift? I hate the stock wheels/rims. Anyway very nice truck
You should be able to fit 31" tires, some of them even came with that size. You have to be careful that the actual physical measurement of the tire is no more than 31", or else it won't fit (actual tire size varies depending on the brand).
What tire size are you running?
Nice video. I love the vehicle. I've got a QX4 2003 with 150k miles on it. Got it in January 2017 for $3600. I may try this Curt roof rack. Also, I've got 17 inch rims and I kind of like the infiniti stock rims so not sure what tire I can get that is a good AT and will fit yet. Great video my friend.
Thank you! Sounds like you got a pretty good deal. Mine had the 17" wheels as well, I liked them but the chrome was coming off and they wouldn't work with tires as big as I wanted without using wheel spacers, which I am not a fan of. Without wheel spacers the biggest tire you can fit is 31" tall (any bigger and it will hit the strut so the wheel won't go on all the way), which should fit on stock suspension with very little rubbing, they may not even rub at all.
I just bought a 2001 Infiniti QX4 with 74k true miles. Only paid $4k 2 weeks ago. Perks of being a Nissan dealership.
low mileage but price is kinda high
Marcus H -Well then drop a link of one that is the same year with lower mileage and lower price. Including heated seats and outdated navigation. Retail from a dealership. Oh yeah also with a clean one owner CARFAX.
I'd argue not. Up here in the rust belt rusted-out garbage (verging on death trap) SELLS for $2k+ all the time. If you want quality, unless you get lucky, you're gonna pay $4K easy.
You still got this baby? I just picked up a 2001 Pathfinder SE for 2300, 148,xxx miles. Really hoping the longevity of it is good. Needs a new radiator (it is patched but I would like new still), a catalytic converter and that's about it. Faded paint on the hood and roof but I love it. Just got a roof basket for it as well
Sounds like a nice rig, get that stuff fixed and you'll be golden! Make sure to check out nissanpathfinders.net/forum for all the information you could ever need. I do still have it, however I will likely be getting rid of it soon due to rust. I'm 99% sure I'm going to be replacing it with a first gen Xterra.
Nice Vid, could you also post the info on th elift kit? I had 2001 qx4 and want to mod it for off roading but don't want to get the wrong kit. Thanks
I didn't use a kit, I mixed and matched parts. Lots of info on this on the NPORA forum.
Where'd you get the taillight guards? I have the rare B16 paint and think those will really set it off!
That's a gorgeous color! I've tried to find exactly which ones I had but I can't, they were just some random brand Amazon ones.
Great video, love the rig! How likely is it that the guy that built you the front bumper would make another one?
Thanks for the compliment! He would be absolutely willing to build another, however he would have to have the vehicle at his shop; he has a policy where he refuses to build something for a vehicle unless he has it in his shop to make sure it all works. If you're able to get work done in West Michigan let me know and I can get you his info, otherwise I'd just find a fabricator near you and let him use pics of my truck as inspiration.
mjotrainbrain616 thanks for your reply. I live in Oregon so it wouldn’t be feasible for me to come all the way there. Do you mind inboxing me a few of your pics? I appreciate it! Let me know how you’d want to do that. I don’t want to leave my email in the public section. Thank you!
@@kayvan6631 Sorry for taking a it to reply, but I've been working on collecting some pics. I've been meaning to do this for a while. Here's a link to a thread on NPORA that's all kind of pics: www.nissanpathfinders.net/forum/topic/44727-bumper-pics/?tab=comments#comment-805994
I have a 02 QX4 also. Where did you get the grills to cover the rear tail lamps?
I don't know exactly which ones they are. There were a couple options on Amazon last I checked.
I drive a 99 infinity qx4 completely stock and I wanna do something to it but I have absolutely no idea what to do, 315,000 miles on it and when I turn right it don’t turn till about 90 degrees so I’m really hoping it’s the gear bushing and not the control arms..
Wow, that's some really sloppy steering! Hopefully you find the problem soon, sounds kinda dangerous haha. Impressive that it's still going strong at so many miles!
Also, do you have the model number for your basket? I love it
Alen Alic It's made by Curt, I can look it up, but as far as I know they only make one model of basket. Mine has the extension so it's longer.
Hey I have a question about the hubs I'm buying a qx4 an want locking hubs how an were do I get it
Don't fit then it messes with the 4wd system, specifically the model's with the dial selector on the dashboard.
I have a 2003 r50 and need new suspension what do you guys recommend
Sorry for the late reply, there's lots of great options out there, but it all depends on how you intend to use the vehicle and what your budget is. I'd suggest starting by taking a look at nissanpathfinders.net/forum to get some info on the topic.
With all your tasteful mods, what kind of mpg are you looking at on an average?
Whoops, sorry for the very late reply! I got around 12 MPG winter and 14.5 MPG summer, so not terrible all things considered. I get about the same in a totally stock V8 4Runner now so I kinda miss the QX4's economy haha!
hey man, recently picked up a qx4 2003 edition for 4k. Only has 98000miles on (owned by a nice old lady that didnt drive much). Mine is still the standard bronze colour and would love to get it in black. Did you get yours professionally painted or do it yourself?
Congrats on the new ride, sounds like a sweet score! Mine was manufactured all black, I love the look. Is yours the two-tone with black body and bronze plastic?
Someone recently stole my oem front bumper so I'm going with an after market high clearance one, how did you go about doing a fog light delete because now my front blinkers won't work
That's a weird thing to have stolen! I had no issues deleting the fog lights, I just left the plugs unused. For turn signals I wired a set from a WD21 Pathfinder into the stock wiring.
Hey brother that’s a sick ride. What’s the model number for your hub locks ? Amazon has some but the app tells me it won’t fit my 02 QX4
Sorry for the late reply, CZcams doesn't notify me for comments in this video anymore I guess.
Technically it's not supposed to fit, but it does for sure. Only issue is depending on which wheels you have it may not fit, but since you have a QX4 there should be no issues.
Hey bud I'm wanting to install some locking hubs as long as the number of splines is correct shouldn't they work? Pain to order something and be wrong part. U mind telling me part number etc for yours? Thanks
Warn 29091. Sorry for the late reply. More info easily available on the NPORA forum.
did you need hub centric rings for the wheels? if so what size
I did need them, I don't remember exactly but I think they were 100 mm x 106 mm?
Do you have a sketch or the dimensions of your winch bumper? Also how much did it cost?
Sorry for the late reply, I unfortunately have zero specs on it. Here's some pictures though! www.nissanpathfinders.net/forum/topic/44727-bumper-pics/
Excellent QX. Please share your OME springs part #.
Front: www.4x4parts.com/i-18981313-pathfinder-heavy-duty-front-coils.html
Rear: www.4x4parts.com/i-18981486-pathfinder-medium-duty-rear-coils.html
@@mjotrainbrain6167 big thanks. enjoy your weekend.
Did you have to extend brake lines or drivetrain etc. for your lift?
Oops, sorry for the extremely late reply! Just noticed there's a few comments in here that slipped by. I did not have to extend anything for the lift I had. For a standard 2" lift you should need nothing more than coils, shocks/struts, and camber bolts.
I am thinking of buying a 2000 QX4. How good are the off road capabilities?
I would say it's on par with any other IFS 4x4, like a Jeep WK, Toyota 4Runner, etc.
Where did you get heavy duty front emu springs? Great truck btw :)
I got them from 4x4parts.com, they do not list them as being Old Man Emu parts however I have been assured that they are by many people on the forums. I'll find the link to them and post it in another reply. And thank you! :-)
www.4x4parts.com/i-18981313-pathfinder-heavy-duty-front-coils.html
Did you experience any issues with the transfer case when driving with the front hubs unlocked in 2WD? Being an 2002 QX4 I have heard that the 4wd light will flash an error. Is that something you experienced?
I experienced it once or twice, but from everything I've researched it's nothing to worry about.
@@mjotrainbrain6167 thats pretty infrequent for the most part.
I keep finding misleading information, I want to run 265/75’s but want 15’s all the forums say 15’s won’t clear the brakes on my 2001 Infiniti qx4 but I see a small amount of people run them, how would I know for sure other than test fitting some 15’s? Thanks. P.S I’m aware of the 3.75 backspacing needed to go higher than a 31 👍
It basically depends on the specific wheel; some will barely fit, some won't. Unfortunately test fitting is the best option. As a couple words of advice, steel wheels have a better chance of fitting than aluminum since the material is thinner. Also, make sure you get ones with a big enough center bore to fit over the hub (I believe it's 100mm for Nissan).
Nice ride. I have a 2002 QX4 myself. Just wondering.. i have some 265/70/16 BFG A/Ts on Pro-comp 16x8 wheels that I just can't seem to get to stay balanced correctly. (Getting steering wheel shake at around 60mph+) have you encountered this problem? I have tried balance beads and had them road forced balanced several times at different locations and they stayed smooth for a few months then they went back to the same issue.. had wheels checked for bends etc, no dice. I've even tried hubcentric rings and extended thread lug nuts.. nothing seems to help.. Atleast for any reasonable amount of time. Also checked and replaced tie rod ends and ball joints, bearings etc. Once I put on the stock 17" wheels it's smooth as silk Appreciate a reply and again nice rig!
I wish I had a good answer for you! I had a similar issue with my QX4, but hubcentric rings fixed it for me. I'm currently chasing the same issue with my 4Runner, and it's real frustrating.
@@mjotrainbrain6167 what brand/size of hub rings did you use? Maybe I didn't get the proper ones.. the front hubs on the QX4 are real strange. Not much of a lip for the rings to sit on.. Yeah this shits very frustrating.
@@ryanpaskey9846 I just used a generic plastic set as well, can't remember the brand anymore. Off Amazon I think. I believe they were 100mm inner diameter, 106mm outer, for the wheels I had.
Hey man!! Nice rig!
How much lift did you get from your suspension without the blocks? Cheers
Without the spacers (coils only) it was about an inch and a half all the way around.
Can you share a picture of how you mounted the CB antenna and which bracket you used please.
Unfortunately I don't have this car anymore and I don't think I have a picture, I'll look though. I used an adjustable Firestik mount.
@@mjotrainbrain6167 Thanks, I am looking to pick up existing bolt holes on the rear door for the mount.
Nice I ordered the 2" spacers from SF creations but people are saying my cv will become ruined... is only 1" safe with manual hubs or will I be safe with 2" spacers and manual hubs?
That can vary. If you have manual hubs and try to avoid keeping the front tires on the ground you *should* be fine, but it is true that spacer lifts can lead to CV failure.
@@mjotrainbrain6167 hmm. avoid keeping the front tires on the ground?
Haha whoops, I definitely said that backwards. Try to avoid getting those front tires off the ground! (Like flexing in big ruts or on rocks.)
Could Velcro work better for the speaker piece?
Chrome Vending Yes, that would probably work extremely well actually, and even if it doesn't it's removable! I'm currently using Velcro in my new rig to mount the entire CB itself inside the center console.
mjotrainbrain616
Awesome bro. I have the same in black also, only mine is a '97.💪👍
Chrome Vending Awesome! Enjoy it, and if you have any other questions feel free to ask! Oh, and make sure to check out nissanpathfinders.net/forum
mjotrainbrain616
Will do!👍 Check me out also at Chrome Vending.
Im bout to buy one how can i check if it in awd please tell me !!!!!!
What’s the brand of your rear coil springs and spacers?
How are the working for you?
5:17 They worked fine, I would do no spacers with Land Rover coils if I did it again. Search on the NPORA forum about that, it's a great low-cost solution.
@@mjotrainbrain6167 Thank you for the info!!
Nice truck you should treat the under side before it rusts away
Luis Rodriguez Yeah man for sure, that's my primary goal right now. Hopefully it will all be said and done by April at the latest!
Where did you get your running boards because i can never find any for my 2000 Infiniti qx4
They're from Westin. I can't find them anymore, so not sure if they're still made.
@@mjotrainbrain6167 ok thank you, I'll look to see if i can find them
@@TwistedTea01 found it. Only fits on later model years like my 2002. www.westinautomotive.com/product-detail/25-1855/signature-3-nerf-step-bars
What size tires are those
6:03
Is this car a good daily? Mpg?any common issues?
I would say it's a fantastic daily. For MPG I got around 16ish when it was stock. Common issues are very few, usually just your usual used car stuff and rusted out strut towers in the front. Check out nissanpathfinders.net/forum for more information!
I just picked one of these up , my buttons are missing for the climate control tho .. do you know of any replacements for the buttons or the unit as a whole ?
Mine had the exact same issue. Unfortunately the only solution I found was to hunt for a unit in better condition from the junkyard, which is getting harder and harder to find. Maybe eBay?
Co-part
Good video. Cool car.
Hi, Just bought a set of the same wheels. Can you point me in the right direction for a set of lugs? Thanks. 97 QX4 should be the same as yours.
Check out Gorilla, they make a wind range of lugnuts, several variants perfect for this application. I don't remember exactly which ones I got, but you'll need to make sure the thread pitch and overall length matches your studs and you'll want tapered ones to work with these wheels.
mjotrainbrain616 thanks much appreciated.
Hello. How bad would it rub the stock fender with your set up?
You would probably only get about one turn of your steering wheel, so it would be extremely inconvenient. I would not recommend at all, fender modification is necessary.
@@mjotrainbrain6167 thanks for the advice. I will trim if necessary.
My lift kit should arrive today with the crosslink as well.
I decided to run 31x10.5x15 on 15x8 wheels.
2.5 lift front, 3 lift rear. Kyb front and rear.
Did you have this for sale about 3 months ago in Illinois? I swear I saw it on facebook
I did not, interesting that you saw a very similar rig for sale!
I swear it was this rig, I am gonna try and find it. I think someone was using pics of your trail rig to run a scam.
uh oh, I'd appreciate knowing about that!
Do you still have this vehicle and if so would you be willing to sell or give away a driver side rear flare fender
Unfortunately I sold this vehicle about 2 years ago, sorry.
Where did you get that front bumper? And beautiful truck by the way
Custom. Unless you can drop your truck off to his shop in western Michigan, no luck. I know several people around the country who have had similar bumpers built for $300-$600 by local 4x4 fabrication shops, so I'd just get some example pics and go talk to a shop.
www.nissanpathfinders.net/forum/topic/44727-bumper-pics/
Unfortunately your car strut towers are rusted . . . Common problem that forced a recall.
Unfortunately true...sucks that Nissan's "fix" is pretty shoddy, although to be fair a proper repair would be very involved.
Thinking of buying a 2002 qx4 with 150k. Would you recommend these as reliable? Im a little nervous I would like to get 200k out of it.
I would definitely say it is reliable. These have been known to clock a quarter million bikes no problem. Mine's at 147k and I'm about to spend a lot of money fixing rust, and I'm not worried about that because I know mine is reliable; I've had it for 25k miles and know how it's supposed to be. However like any old car, they can have issues. The biggest thing I'd look out for is structural rust, and evidence that it has been taken care of. At that many miles it should definitely have had plugs replaced as well as a handful of other regular service things. Listen for lifter ticking when you start it and ask about oil leakage, as the rear main seal has a tendency to go out. Check out info on all the online resources such as NPORA and NicoClub. Hope that helps!
Hey You At that mileage it's also almost certainly going to need a lot of suspension stuff, particularly bushings, done at some point. If you're handy the helpful guides on the forums should get ya through the jobs. Otherwise that may be something to factor in. (Struts, ball joints, trailing arm bushings, etc.). I've got almost all new suspension on mine, and other than the rust, you'd never know it has over 50k miles.
Get it. I have a 1999.5 4x4 Pathfinder n I'm at 240,000 miles. N ir still runs like a champ. I want to lift it. But 2 8nches seem not enough for me at the moment. I have the suspension kinda stick. Have 2 in spacers o front. N some heavy duty shocks in the back. Dont do much off roading. It's my daily driver n my rig fir the mountain since I snowboard n also do some downhill mountain biking.. but if I ever do want that 2 inch lift I'll be back asking some questions bro. Great VIDEO
JOSE CARLOS TERRONES Sounds like a pretty sweet daily driver! Make sure to check out nissanpathfinders.net/forum and if you have any further questions feel free to ask here!
I have a '98 pathfinder with 260,000 miles and still runs perfect. It needs a little love in the suspension department but interior, exterior and everything else is almost like new.
How many miles in your QX4?
It has about 140k miles when I sold it 3 years ago. It was scrapped over a year ago, no idea how many miles it had at the time.
Where did you purchase the trunk liner?
I actually didn't purchase it, the previous owner did. It's a Husky brand.
I did some looking and it seems Husky actually doesn't make this product anymore, however Weathertech does. I have a Weathertech trunk liner in my 4Runner now and the quality is very good, so I'd recommend that.
Did you use premium fuel?
Sometimes mid grade, sometimes premium. Never regular for me.
With the lift how much ground clearance do you have?
I don't remember exactly, and I don't have the vehicle anymore. I want to say it was 13 inches under the "frame".
@@mjotrainbrain6167 what made you decide to sell it?
@@mjotrainbrain6167 why did u sell it
@@cyclonus01 Strut towers were beginning to rust.
@@sosaltysereezy Strut towers were beginning to rust.
What's your mpg? Any problems with engine? I want buy one for daily to work
MPG was not good lifted like this, about 10-12. Stock it got about 15-16. The engine was great the whole time I owned it, up to about 150k miles. It kept going for several years after I sold it until it was drowned in deep water.
@@mjotrainbrain6167 2001 qx4 is good you think? 15 -16 city is regular for this vehicles right? Is 87 Octane for this model? I am looking for a sub for a 4runner so expensive right now you know.
4Runner is very expensive right now! I think QX4 is a good car. You are supposed to use 91 gas, but I know a lot of people use 87 no problem.
@@mjotrainbrain6167 what about this oil consumption is it true? If I do 3k oil change I should be right. Any problems with 4x4? Expensive fix it or parts hard to find.
The 4x4 system seems pretty bullet proof, both with the electronically actuated transfer case and the old school manual one. Oil consumption can be an issue, as can leaks. Overall it's a common theme among all Nissan VQ engines, and from what I've seen maintenance and miles don't seem to make much of a difference. Either you'll get one that goes through oil or you'll get one that doesn't. That and a couple other little things (PCV valve gasket and power valve screws; google those) are the only major issues I am aware of.
damn bro you need some rust reformer spray for underneath.
I have a 2001 QX4 with 179,000 miles. I have the same locking hub, wheel as you do, but they are wrapped in Pro Comp AT 31x10.5R15s. I also have a 2inch spacer lift all around. I want to upgrade to 32s. I already have done some trimming to the front stock bumper, but wanted to know what trimming you had to do (if any) behind the tire for 32s to fit? Thanks!
Sounds like you've got a sweet build so far! Behind the front tire I had to cut a small section out of the bottom corner of the fender, right by the rocker panel. It was very little and it didn't impact the visual body lines of the vehicle in any way.
@@mjotrainbrain6167 Thank you so much for your response! Your videos and builds are great!
@@AkshayBhavsar1989 Thanks much, good luck with yours!
Does it consume any oil ?
No it didn't, although it is very common for the VQ engine to do so.
@@mjotrainbrain6167 I have R50 Nissan Pathfinder . I want to install 265/75 16 . Do I need any spacers ?
hey man whats that front bumper u have
8:13
How much?
Tire size?
6:04
Can you tell me what lugs I should get if I went with the same wheels as you?
Alen Alic Sorry for the late reply, I'll check when I get home, I still have the box so hopefully it has a part # on it.
Great, thanks!!
Sorry to bother you again...any chance you had a chance to look at what lugs they are? Trying to make an order soon and have it ready for the spring. Thanks!
Sorry I didn't get back to you, all I can find is that theyre made by AccuWheel and the thread is 12x1.25. Hope that helps!
where can I find those tires?
The tires are available all over, KO2's are very common. I ordered the wheels on Amazon, you can get ProComp wheels lots of other places as well.
@@mjotrainbrain6167 or just what size the tires are? Im hoping i got clearance in front because I just did a 2'' lift and im worried bigger tires wont leave me alot of room for turning
@@grey1k 6:02
@@grey1k You cannot fit a tire larger than 31" without different wheels or spacers. You'll probably have to trim the bumper but idk how much because obviously I don't have a stock bumper, and you'll have to trim a bit of metal in the bottom corner of the fender by the door
mjotrainbrain616 awesome thx for helping me out
Saw this video before buying my QX4... but it turned out I bought a 2 wheel drive version.
Oops! Hopefully you live someplace where you don't need 4wd. It'll still be a great vehicle, how are you liking it so far?
@@mjotrainbrain6167 Besides the state it was in when I bought it, it's been pretty good. Pretty nice size.
Needs a wash and inter cleaning
It gets cleaned very frequently in the summer. It's harder to do in the winter, between the cold and school.
Clean SUV - bad owner ;)
Hahaha, I care for it...enough! :-)
Hi man, listen, you won’t tell me if the radiator will come up to him from Nissan Pathfinder of the same years, but I have the same infiniti QX4, and the radiator is covered, they say Nissan will fi
If you can put together a question that makes sense and can be polite I'll consider replying.
يا سلام
I wanna your car =)
Haha, thank you! Yours is very nice as well!
The Jeep panfinther is the best I love my Nissan panfinther
Nobody gives a dam about floor mats
Good for you 👍