Watching you spray looked so chaotic and random I couldn't even keep up... It's not like the other spraying videos I've seen.... BUT the results speak for themselves!!! The finish at the end looked absolutely flawless! You're a magician 🧙♂️
The thing I like about you Mr. Dutch car painter, is you spray at a good PSI. You can HEAR the difference. It really atomizes the material and lays down really flat, Good job.
Good afternoon Edwin, your right, a fantastic finish to end the week with. Really good looking finish and shine. You take care and have a good weekend. Thanks
Rear bumper should have been removed and prepped for full clear. He just melted the clear where the paper was pulled off. The lower molding on front door should have also been removed.
I agree remove the bumper and mldg I was thinking the same thing this is going to peel where he did not wrap the clear around the edges and under the mldg
Judging by his application, i would say either Standoblue (Standox waterborne) or Spies Hecker Hi-Tec (Spies waterborne.) Both of which are Axalta and essentially the same system under different names. If so, you have recommended shaded high build primer to avoid using wet on wet (primer sealer) all the time. Some blues especially with this system can cover over lighter shades.
Ηello friend... Another perfect finish from the perfect painter! Usually you don't do a mist coat when you apply the first coat of clear... Do you trying something different?
It's blender help you painting speally on blend panel some time it's hot your over sprays goes on blend panel and get dry this blender help stays over srapy wet and mealt in
Its called color blender. Its essentially a clear basecoat. You mix it with the color basecoat in different ratios depending on what coat youre on. Also he sprays the "color blender" on the panel first for what you call a "wet bed". I usually never do a wet bed. But its an option.
The way you wipe your body filler reminds me of a dry wall technician. I think you must have done drywall before doing paint and body work. I'm expecting you to pull out one of your 12 inch dry wall blades to fill in a side of a door one day.
@@Speedy123youknowme 30 psi is normally what is used, yes it has a lot of overspray but I have tested 20 psi and yes it has much less overspray but you get more orange peel. unless you are replicating the exact orange peel from the oem finish 30 psi is required for decent results. overspray is different on each gun however the main goal is to achieve a match or a good finish, overspray is not taken to account. what good is less overspray if you get garbage finish or you have to spend time cutting and buffing and also shooting more clear because you don't have enough build left from the cutting and buffing? your focus is on the wrong things
Looks like his on the low 30's I believe is a lot but is a spraying technic that's getting really popular wen I started it was like 18-20 for base 25-28 max for clear
Watching you spray looked so chaotic and random I couldn't even keep up... It's not like the other spraying videos I've seen.... BUT the results speak for themselves!!! The finish at the end looked absolutely flawless! You're a magician 🧙♂️
D
This has been performed as an art. Welldone Dutch car painter.
Takes me back to the 90's using Gip-Fast 60 in my workshop...loved those days...hard work but good fun
Always nice job keep up the good work i used be a spraypainter too but not anymore
Good job like always 💪
The thing I like about you Mr. Dutch car painter, is you spray at a good PSI. You can HEAR the difference. It really atomizes the material and lays down really flat, Good job.
Good afternoon Edwin, your right, a fantastic finish to end the week with. Really good looking finish and shine. You take care and have a good weekend. Thanks
Beautiful spraying, I love it
Hola excelente trabajo saludos desde bs as Argentina
Nice clean work!
Nice job thanks 🙏
What a colour perfect as always 👍 take it easy bud..
Hallo,
Nice job, you paint or you repair also as fixing body kits?.
Good job 👍
❤❤❤❤good job ❤❤
Odličan posao...
Amazing🇦🇱
Great job friend
muy buen trabajo,a seguir asi,un saludo desde españa
VERY NICE WORK.
Nice work
🤩wow nice
Mooi gedaan 👍🏾
Dankje
Please tell me for blend base coat how much tinnier did you add to colour my mean is for your first spray base coat
Nice job 👍 pls can you tell me more about this your painting work
Was that a wetbed before your first coat of clean And if so at what PSI are you spraying it?
Nice 👍 job please let me know why you didn’t blend on back door , thanks
Beautiful
nice job bro...
Водичка конечно сила и парень рукастый,красавец!
Nice job which product and which one you apply before the paint and which pistol you are using thanks for sharing
Even this dutch boy abandons his precious little SATA 😮 respect for IWATA THE KING
Nice paint
Good paint aplicetion
NEW 👏👏👏👏👏👏
Good job my friend...
You are very hardworking like me 😉
Tuyệt quá
I'm car spray painter with 7 years experience, i wish i could work with your company
Good job bro
nice 👌 man
God bless you
So nice big brother
Do you put demin water in your color blend ? It’s not going milky as it should and it’s wetting very very easy..
good job ...
Rear bumper should have been removed and prepped for full clear. He just melted the clear where the paper was pulled off. The lower molding on front door should have also been removed.
Do u have videos of how it needs to b done?
I agree remove the bumper and mldg I was thinking the same thing this is going to peel where he did not wrap the clear around the edges and under the mldg
Great bro
I am painter
Nd u painting do excellent
Base de água ...top... blinder em volta...pra não manchar
Hai pro i am indea Tamilnadu nic work sir
👍👍👍 good 🙋
Very good 👍👍
Perfeito
My favourite car Painter , always very inspiring to watch your work , hope to see you on youtube soon 👍
👍😎
Toi rat thich nhung cach lam nhu vay lam ok
What clear are you spraying
would like to know which aircap nozzle setup you use?
How many times did you spray lacquer, and how many minutes after...
Nice job...
Молодец мастер
what paint brand are you using?
didnt it require a darker GShade?
Ravenna Blue is a nice colour to paint!
Good job!
Joaquim Bot
Judging by his application, i would say either Standoblue (Standox waterborne) or Spies Hecker Hi-Tec (Spies waterborne.) Both of which are Axalta and essentially the same system under different names. If so, you have recommended shaded high build primer to avoid using wet on wet (primer sealer) all the time. Some blues especially with this system can cover over lighter shades.
Good job, but I expected a bit mor acrobatic while moving around the car. 😀👍
What did you mix with the car paint for it to make shinny
Showwww
How many turns out of paint material did you set your gun to ?
why do i enjoy this?
Good job
Que buen trabajo que configuración le diste a la pintola
Ηello friend... Another perfect finish from the perfect painter! Usually you don't do a mist coat when you apply the first coat of clear... Do you trying something different?
Para no mover las particulas de difuminado o perlas
Muito legal
Super guru
Hi brother I want to ask you something about the product you used at first thanks
Hi mi friend i Wang to ask You something about the product You used first???? Ty
@@danydeak1852 i am use Glasurit 90-M4 before waterbase colorcoat
Good job my frend I have a question . what material did you put first with gun
Rudy Montoya basecoat blender
It's blender help you painting speally on blend panel some time it's hot your over sprays goes on blend panel and get dry this blender help stays over srapy wet and mealt in
@@jiwandhaliwal2120 y
What was the very first coat you sprayed??was it laquer..?
Its called color blender. Its essentially a clear basecoat. You mix it with the color basecoat in different ratios depending on what coat youre on. Also he sprays the "color blender" on the panel first for what you call a "wet bed". I usually never do a wet bed. But its an option.
Good job, you paint booth need clean, haha
Nice
Gan supar ....
나이스샷
💓💓💓💓💓
👌👍👍👍
The way you wipe your body filler reminds me of a dry wall technician. I think you must have done drywall before doing paint and body work. I'm expecting you to pull out one of your 12 inch dry wall blades to fill in a side of a door one day.
Excelente trabajo seria formidable si pusieran subtitulos en español para nosotros los latinos, gracias si indicas graduacion de la pistola
How much pressure you use on the clearcoat?
28-35, test if you can use 35 psi with good results, if not try 30
I wonder the same ? Sounded really high and there was a lot of off spray from high pressure I would assume
@@Speedy123youknowme 30 psi is normally what is used, yes it has a lot of overspray but I have tested 20 psi and yes it has much less overspray but you get more orange peel. unless you are replicating the exact orange peel from the oem finish 30 psi is required for decent results. overspray is different on each gun however the main goal is to achieve a match or a good finish, overspray is not taken to account. what good is less overspray if you get garbage finish or you have to spend time cutting and buffing and also shooting more clear because you don't have enough build left from the cutting and buffing? your focus is on the wrong things
What colour less paint u sprayed first
⭐⭐⭐⭐⭐
👍👏👏👏👏👏🇧🇷Brasil
volevo chiederti cosa passi prima della base nella prima mano grazie
maurizio del gaudio una specie di aditivo che serve per sfumature la base
Muy bonito
cool 💪☕
I am a painter and I'm proud of my work
how pressure do you work the clear coat?
Looks like his on the low 30's I believe is a lot but is a spraying technic that's getting really popular wen I started it was like 18-20 for base 25-28 max for clear
Good jop 😊😊😊
Beautiful job ! Thumbs up 👍🏾
Gti pro daa
Cara spray terlalu lebar dan boros bahan cat... Saya suka dengan spray gun nya.. Merk apa dan harga berapa..??
Quick question... What is it that u spray on the vehicle before u spray it?
A so called blender, to blend the color without overspray and better blendzone
Can u tell me your painting gun?
I think he using tekna orange gun with grey cap
What is tha 1st time spry
It's call wet bed Ovid over spray going on blend panel stays wet use when you spraying matelic color or 3 stage
Very good job 👍👍👍
Good
Süper 👍👍👍👍👍👍
nice job, what's brand of your paint gun? tekna
Thanks, is Devilbiss
Please tell me what you apply to the surface before painting?
A blender, for a smooth basecoat aplying,
@@Edinxg Is it sold in paint stores?
Yes they have blenders for base and for clears